Category:LS2

From Buffalo NAS-Central

[edit] HDHLAN MIPSel (LS2)

	HDHLAN MIPSel (LS2)
CPU	400MHz IDT 79RC32434-400BC with MIPSel CPU core
RAM	64MB Micron MT 46V32MI6-SBC SDRAM
Flash ROM	4MB Macronix MX29LV320T. or ST M29W324DB
USB	2 type A(rear - /dev/usb/lp0, front - /dev/usb/lp1) - NEC D720101GJ
NIC	10/100Mb Realtek 8201CPPCI ethernet controller
IDE Controller	IT8211 PCI IDE disk controller.
Stock Firmware	2.x
More Information	Information/MIPSelOverview

About the only viable starting point with the LS2 is to install OpenLink by following the instructions on The LinkStation firmware flasher. Almost everything here will also require you to have installed the Precompiled C development environment, running on the LS as well.