From Buffalo NAS-Central

[edit] Why this article?

On the original and modified stockfirmwares we always have a some default shares. The normal "share" is not the problem, but "info" is as you cannot get rid of it. This article describes how to deal with that problem.

[edit] LS1/LS2/HG/HS with Openlink

[edit] Description of the mechanism

mkcode!!

[edit] Solutions

[edit] Automatic removal of the info share

[edit] Disabling updating of smb.conf

See How to disable the automatic update of smb.conf Linkstation (LS1/LS2) section.

[edit] LSPro/LSLive with stock or modified stock firmware

[edit] Description of the mechanism

nas_configgen!! (/usr/local/sbin/nas_configgen)

This is called by /etc/init.d/smb.sh in the configure() section.

 /usr/local/sbin/nas_configgen -c samba

This file with the correct arguments, will parse /etc/melco/shareinfo & /etc/melco/info to obtain the info required to create the smb.conf.

When you create/edit the shares/basic with the WebUi, shareinfo, info & the smb.conf are rewritten & the samba service is restarted by smb.sh

Within nas_configgen, Buffalo have included a default [Global] section which requires a minimal amount of information taken from /etc/melco/info. Such as 'dos charset', 'netbios name', 'server string', 'wins server' & 'workgroup'. The default [info] share is also added at this point.

The shares sections added by the user in the WebUi, are then added at the bottom of the smb.conf. These are taken from /etc/melco/shareinfo, in the following format.

Raw

 share<>disk1<>LinkStation folder<>all<>all<>all<>all<>1<>1<>0<>0<><>0<>0<>0<>0;

Translated

 Share Name<>Disk<>Comment<>RW Users<>RW Groups<>RO Users<>RO Groups<>Windows<>Mac<>FTP<>Backup<>Backup Pass<>RO<>Trash<>Quota Status<>Quota Size;

[edit] Solutions

If you have telnet/ssh access to your box & happy with editing files read on, else read How to enable telnet w/ ACP Commander (both hddrootfs in EM Mode) & Vi text editor tutorial

[edit] With sed

cp -a /etc/samba/smb.conf /etc/samba/smb.orig
sed '/^\[info\]/,/guest ok = yes/d ; /^###info###/d' /etc/samba/smb.orig > /etc/samba/smb.conf

Paste that after line 20 in the /etc/init.d/smb.sh - info share is removed on restart, and every restart thereafter.

[edit] With a perl script

Sources:

http://search.cpan.org/~sscotto/File-Samba-0.03/lib/File/Samba.pm

http://search.cpan.org/~gaas/Data-Dump-1.08/lib/Data/Dump.pm

Install:

Extract tarball ([1]) to /

cd /tmp
wget http://downloads.nas-central.org/Users/kaiten/removeinfoshare.tgz
tar -C / -xzvf removeinfoshare.tgz

Add the following line to "/etc/init.d/smb.sh" after "/usr/local/sbin/nas_configgen -c samba":

/usr/local/bin/removeinfoshare.pl

Configure SMB through the WebUI as normal.

Tarball Contents:

/usr/local/lib/perl5/5.8.8/Data/Dump.pm

/usr/local/lib/perl5/5.8.8/File/Samba.pm

/usr/local/bin/removeinfoshare.pl