Add Jtag Port

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 23:31, 28 March 2006 by 24.73.28.129 (Talk)

Jump to: navigation, search

This document is a work in progress. It explains how to fit the internal on-chip debug (OCD) port on a Linkstation, Kuro-Box or Kuro-Box/HG to a PC interface.

Cable required: msp430-jtag.jpg

Contents

OCD connector

The internal OCD port uses an electrical standard known as JTAG/COP. The signals have to be buffered to protect the hardware from damage and we use a JTAG wiggler to do this.

Those with some electrical experience could build their own circuit, but most will opt for ordering one.

Schematics and Software to build your own

http://hri.sourceforge.net/tools/

Buy one

Commercial The Wiggler seems to be the cheapest at $150.

Hobby Could the 20-pin ARM-JTAG be modified to work with Kuro-Box? $20.

Locate the pads

The pads are labelled CN5: PCB_4.jpg

Connector Pin-outs

In order to use this port, you should add the 10K series VIO resistor R67 and a 4-way 1K resistor pack at RA11. It may be possible to use some functionality without these components.

If you know which set of pin-outs that LinkStation/Kuro-Box uses, please update this page with the details.