Difference between revisions of "Add a Serial port to the LS DUO"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
m (New page: [http://buffalo.nas-central.org/forums/viewtopic.php?f=50&t=5871 Serial @ Pro Duo] The connector for the Serial port is CN10 it is easy to make out from the frontside image where GND is. ...)
 
m
Line 5: Line 5:
 
|-
 
|-
 
||
 
||
[[Image:LSPRO_DUO_PCB_front_comments.JPG|thumb|The pinout (if you look on the board from the backside): [RxD]-[TxD]-[Vcc]-[GND]]]
+
[[Image:LSPRO_DUO_PCB_front_comments.JPG|thumb|The pinout (if you look on the board from the frontside): [RxD]-[TxD]-[Vcc]-[GND]]]
 
||
 
||
 
[[Image:LSPRO DUO PCB back comments.JPG|thumb|The pinout (if you look on the board from the backside): [GND]-[Vcc]-[TxD]-[RxD]]]
 
[[Image:LSPRO DUO PCB back comments.JPG|thumb|The pinout (if you look on the board from the backside): [GND]-[Vcc]-[TxD]-[RxD]]]
 
|}
 
|}

Revision as of 03:57, 8 September 2008

Serial @ Pro Duo

The connector for the Serial port is CN10 it is easy to make out from the frontside image where GND is.

The pinout (if you look on the board from the frontside): [RxD]-[TxD]-[Vcc]-[GND]
The pinout (if you look on the board from the backside): [GND]-[Vcc]-[TxD]-[RxD]