Add a Serial port to the LS DUO

From NAS-Central Buffalo - The Linkstation Wiki

Revision as of 03:52, 8 September 2008 by Ramuk (Talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Serial @ Pro Duo

The connector for the Serial port is CN10 it is easy to make out from the frontside image where GND is.

The pinout (if you look on the board from the backside): [RxD]-[TxD]-[Vcc]-[GND]
The pinout (if you look on the board from the backside): [GND]-[Vcc]-[TxD]-[RxD]
Retrieved from "http://buffalo.nas-central.org/wiki/Add_a_Serial_port_to_the_LS_DUO"
Personal tools