Add a Serial port to the LS MINI
From NAS-Central Buffalo - The Linkstation Wiki
(Difference between revisions)
m |
m |
||
| Line 1: | Line 1: | ||
{{Articles|Hardware|LS-WSGL/R1}} | {{Articles|Hardware|LS-WSGL/R1}} | ||
[[Image:LS_WSGL.jpg|thumb|right|Linkstation Mini]] | [[Image:LS_WSGL.jpg|thumb|right|Linkstation Mini]] | ||
| - | [[Image:LSMINI_PCB_front.jpg| | + | [[Image:LSMINI_PCB_front.jpg|right|thumb|LS MINI PCB frontside - high resolution]] [[Image:LSMINI_PCB_back.jpg|right|thumb|LS MINI PCB backside - high resolution]] |
=Background= | =Background= | ||
Revision as of 01:29, 8 September 2008
Contents |
Background
Apparently there are two traces that have been interrupted which would allow serial port access.
These traces have been interrupted UNDER a SMD capacitor at position C54. Junker (see Yamasita's article/reference) discovered the way first[1]
LaitrKeiows and johnbock duplicated his efforts[2]
Method
C54
Method 1: reconstruct the traces (on the backside)
| 
|
Method 2: Bridge the traces (on the frontside)
|
| File:LSMINI-Serialport-c54bridged.jpg |
Pinout of Port
......
Serial Port Output
LS Mini: Serial Port Output - Boot-Log
References
- ↑ シリアルコンソールのためのパッチ / patches for serial console:LS-WSGL/R1
- ↑ The Buffalo NAS hacking Forums:Serial access possible? YES!
