Difference between revisions of "Add a Serial port to the LS MINI"
From NAS-Central Buffalo - The Linkstation Wiki
m |
m |
||
| Line 8: | Line 8: | ||
These traces have been interrupted UNDER a SMD capacitor at position C54. Junker (see Yamasita's article/reference) discovered the way first<ref>[http://www.yamasita.jp/linkstation/2008/08/080831__patches_for_serial_console.html シリアルコンソールのためのパッチ / patches for serial console:LS-WSGL/R1 ]</ref> | These traces have been interrupted UNDER a SMD capacitor at position C54. Junker (see Yamasita's article/reference) discovered the way first<ref>[http://www.yamasita.jp/linkstation/2008/08/080831__patches_for_serial_console.html シリアルコンソールのためのパッチ / patches for serial console:LS-WSGL/R1 ]</ref> | ||
| − | + | [[User:Laitr Keiows |Laitr Keiows]] and johnbock duplicated his efforts<ref>[http://buffalo.nas-central.org/forums/viewtopic.php?f=61&t=10471 The Buffalo NAS hacking Forums:Serial access possible? YES!]</ref> | |
| − | + | ||
=Method= | =Method= | ||
Revision as of 01:32, 8 September 2008
Contents |
Background
Apparently there are two traces that have been interrupted which would allow serial port access.
These traces have been interrupted UNDER a SMD capacitor at position C54. Junker (see Yamasita's article/reference) discovered the way first[1]
Laitr Keiows and johnbock duplicated his efforts[2]
Method
C54
Method 1: reconstruct the traces (on the backside)
|
|
Method 2: Bridge the traces (on the frontside)
|
|
200px |
Pinout of Port
......
Serial Port Output
LS Mini: Serial Port Output - Boot-Log
