From NAS-Central Buffalo - The Linkstation Wiki

Revision as of 01:32, 8 September 2008 (view source) Ramuk (Talk | contribs) m ← Older edit		Revision as of 01:37, 8 September 2008 (view source) Laitr Keiows (Talk | contribs) m (We need this image too.) Newer edit →
Line 19:		Line 19:
	||[[Image:LSMINI-Serialport-before.jpg|200px]]		||[[Image:LSMINI-Serialport-before.jpg|200px]]
	||[[Image:LSMINI-Serialport-after.jpg|200px]]		||[[Image:LSMINI-Serialport-after.jpg|200px]]
		+	||[[Image:LSMINI-Serialport-after-frontside.jpeg|200px]]
	|}		|}
		+
	===Method 2: Bridge the traces (on the frontside)===		===Method 2: Bridge the traces (on the frontside)===
	{|		{|

---

Revision as of 01:37, 8 September 2008

Contents 1 Background 2 Method 2.1 C54 2.1.1 Method 1: reconstruct the traces (on the backside) 2.1.2 Method 2: Bridge the traces (on the frontside) 2.2 Pinout of Port 3 Serial Port Output 4 References

Background

Apparently there are two traces that have been interrupted which would allow serial port access.

These traces have been interrupted UNDER a SMD capacitor at position C54. Junker (see Yamasita's article/reference) discovered the way first^[1]

Laitr Keiows and johnbock duplicated his efforts^[2]

Method

C54

Method 1: reconstruct the traces (on the backside)

Method 2: Bridge the traces (on the frontside)

File:LSMINI-Serialport-c54bridged.jpg

Pinout of Port

......

Serial Port Output

LS Mini: Serial Port Output - Boot-Log

References

1. ↑ シリアルコンソールのためのパッチ / patches for serial console:LS-WSGL/R1
2. ↑ The Buffalo NAS hacking Forums:Serial access possible? YES!