Apache w/ PHP and MySQL Support (MIPSel) - Revision history

Mindbender: /* Opening Comments */

Mindbender — Tue, 11 Sep 2007 01:19:28 GMT

Opening Comments

← Older revision		Revision as of 01:19, 11 September 2007
Line 12:		Line 12:
	Apache, along with PHP and MySQL, is very straight forward to install on a stock LinkStation 2 with the OpenLink firmware installed. If you have experience with building these packages, or compiling in general, it is a snap. If you have little or no experience in such matter, just follow the guide -- everything is reversible.		Apache, along with PHP and MySQL, is very straight forward to install on a stock LinkStation 2 with the OpenLink firmware installed. If you have experience with building these packages, or compiling in general, it is a snap. If you have little or no experience in such matter, just follow the guide -- everything is reversible.

-	If you have not already done so, visit the [[Projects/OpenLink \| Openlink]] section and follow the instructions for installing the telnet enabled firmware. You will also need to download and install the [http://downloads.~~linkstationwiki~~.~~net~~/~~development_tools~~/mipsel-tools-2.tgz MIPSel Tools] before continuing.	+	If you have not already done so, visit the [[Projects/OpenLink \| Openlink]] section and follow the instructions for installing the telnet enabled firmware. You will also need to download and install the [http://downloads.nas-central.org/LS2_MIPSel/DevelopmentTools/NativeToolchains/mipsel-tools-2_1.tgz MIPSel Tools] before continuing.

	== A Remark on "--prefix" ==		== A Remark on "--prefix" ==

Ramuk: /* Opening Comments */

Ramuk — Thu, 07 Sep 2006 19:45:15 GMT

Opening Comments

← Older revision		Revision as of 19:45, 7 September 2006
Line 8:		Line 8:
	*[[w:Apache HTTP Server\|'''A'''pache]], the [[w:Web server\|Web server]];		*[[w:Apache HTTP Server\|'''A'''pache]], the [[w:Web server\|Web server]];
	*[[w:MySQL\|'''M'''ySQL]], the [[w:DBMS\|database management system]] (or database server);		*[[w:MySQL\|'''M'''ySQL]], the [[w:DBMS\|database management system]] (or database server);
-	*[[PHP\|'''P'''HP]] [[w:scripting language\|scripting/programming language]].	+	*[[w:PHP\|'''P'''HP]] [[w:scripting language\|scripting/programming language]].

	Apache, along with PHP and MySQL, is very straight forward to install on a stock LinkStation 2 with the OpenLink firmware installed. If you have experience with building these packages, or compiling in general, it is a snap. If you have little or no experience in such matter, just follow the guide -- everything is reversible.		Apache, along with PHP and MySQL, is very straight forward to install on a stock LinkStation 2 with the OpenLink firmware installed. If you have experience with building these packages, or compiling in general, it is a snap. If you have little or no experience in such matter, just follow the guide -- everything is reversible.

Ramuk at 19:44, 7 September 2006

Ramuk — Thu, 07 Sep 2006 19:44:36 GMT

← Older revision		Revision as of 19:44, 7 September 2006
Line 1:		Line 1:
	{{Template:Articles\|LS2\|Mediaserver}}		{{Template:Articles\|LS2\|Mediaserver}}
-	<small><font color=red>''Originally by Nick and edited by ~~...<br>~~BurnHard, frontalot, Cathedrow & Ralf from linkstationwiki.org''</font></small>	+	<small><font color=red>''Originally by Nick and edited by BurnHard, frontalot, Cathedrow & Ralf from linkstationwiki.org''</font></small>
		+
	'''Installing Apache w/ PHP and MySQL Support. (LAMP)'''		'''Installing Apache w/ PHP and MySQL Support. (LAMP)'''
	== Opening Comments ==		== Opening Comments ==
-	'''LAMP''' (or '''L.A.M.P.''') refers to a set of [[w:free software\|free software]] programs commonly used together to run dynamic [[w:Web site\|Web site]]s or [[w:Server (computing)\|server]]s:	+	'''[[w:LAMP (software bundle)\|LAMP]]''' (or '''L.A.M.P.''') refers to a set of [[w:free software\|free software]] programs commonly used together to run dynamic [[w:Web site\|Web site]]s or [[w:Server (computing)\|server]]s:
	*[[w:Linux\|'''L'''inux]], the [[w:operating system\|operating system]];		*[[w:Linux\|'''L'''inux]], the [[w:operating system\|operating system]];
	*[[w:Apache HTTP Server\|'''A'''pache]], the [[w:Web server\|Web server]];		*[[w:Apache HTTP Server\|'''A'''pache]], the [[w:Web server\|Web server]];

Ramuk at 19:43, 7 September 2006

Ramuk — Thu, 07 Sep 2006 19:43:28 GMT

← Older revision		Revision as of 19:43, 7 September 2006
Line 1:		Line 1:
-	{{Template:Articles}}	+	{{Template:Articles\|LS2\|Mediaserver}}
-	<~~center~~><font color=red>''Originally by Nick and edited by ...<br>BurnHard, frontalot, Cathedrow & Ralf from linkstationwiki.org''</font></~~center~~>	+	<small><font color=red>''Originally by Nick and edited by ...<br>BurnHard, frontalot, Cathedrow & Ralf from linkstationwiki.org''</font></small>
-	'''Installing Apache w/ PHP and MySQL Support.	+	'''Installing Apache w/ PHP and MySQL Support. (LAMP)'''
-	'''	+
-		+
-		+
	== Opening Comments ==		== Opening Comments ==
		+	'''LAMP''' (or '''L.A.M.P.''') refers to a set of [[w:free software\|free software]] programs commonly used together to run dynamic [[w:Web site\|Web site]]s or [[w:Server (computing)\|server]]s:
		+	*[[w:Linux\|'''L'''inux]], the [[w:operating system\|operating system]];
		+	*[[w:Apache HTTP Server\|'''A'''pache]], the [[w:Web server\|Web server]];
		+	*[[w:MySQL\|'''M'''ySQL]], the [[w:DBMS\|database management system]] (or database server);
		+	*[[PHP\|'''P'''HP]] [[w:scripting language\|scripting/programming language]].

	Apache, along with PHP and MySQL, is very straight forward to install on a stock LinkStation 2 with the OpenLink firmware installed. If you have experience with building these packages, or compiling in general, it is a snap. If you have little or no experience in such matter, just follow the guide -- everything is reversible.		Apache, along with PHP and MySQL, is very straight forward to install on a stock LinkStation 2 with the OpenLink firmware installed. If you have experience with building these packages, or compiling in general, it is a snap. If you have little or no experience in such matter, just follow the guide -- everything is reversible.
Line 214:		Line 216:
	\| should explicitly set it to on in your php.ini file. \|		\| should explicitly set it to on in your php.ini file. \|
	\| Note that you are strongly encouraged to read \|		\| Note that you are strongly encouraged to read \|
-	\| <nowiki>http://www.php.net/manual/en/security.globals.php</nowiki> \|	+	\| <nowiki>http://www.php.net/manual/en/security.globals.php</nowiki> \|
	\| about the implications of having register_globals set to on, and \|		\| about the implications of having register_globals set to on, and \|
	\| avoid using it if possible. \|		\| avoid using it if possible. \|
Line 257:		Line 259:

	*''' TODO: Information on adding additional modules to PHP'''		*''' TODO: Information on adding additional modules to PHP'''
-
-	~~[[Category:LS2]]~~
-	~~[[Category:Howto]]~~
-	~~[[Category:Mediaserver]]~~

209.94.50.66: /* MySQL */

209.94.50.66 — Sun, 23 Jul 2006 16:56:02 GMT

MySQL

← Older revision		Revision as of 16:56, 23 July 2006
Line 67:		Line 67:
	You should now have a fully functioning version of MySQL on your LinkStation. Now we can set up the server to start like any other service.		You should now have a fully functioning version of MySQL on your LinkStation. Now we can set up the server to start like any other service.

-	Go back to where you have build [[~~Articles/MIPSelApache~~#MySQL \| MySQL]]	+	Go back to where you have build [[#MySQL \| MySQL]]

	/mnt/hda/misc/mysql-4.1.20		/mnt/hda/misc/mysql-4.1.20

Ramuk: Articles/MIPSelApache moved to Apache w/ PHP and MySQL Support (MIPSel)

Ramuk — Sun, 23 Jul 2006 02:05:41 GMT

Articles/MIPSelApache moved to Apache w/ PHP and MySQL Support (MIPSel)

← Older revision

Revision as of 02:05, 23 July 2006

Ramuk at 01:51, 21 July 2006

Ramuk — Fri, 21 Jul 2006 01:51:43 GMT

← Older revision		Revision as of 01:51, 21 July 2006
Line 1:		Line 1:
		+	{{Template:Articles}}
	<center><font color=red>''Originally by Nick and edited by ...<br>BurnHard, frontalot, Cathedrow & Ralf from linkstationwiki.org''</font></center>		<center><font color=red>''Originally by Nick and edited by ...<br>BurnHard, frontalot, Cathedrow & Ralf from linkstationwiki.org''</font></center>
	'''Installing Apache w/ PHP and MySQL Support.		'''Installing Apache w/ PHP and MySQL Support.

Ramuk at 00:45, 17 July 2006

Ramuk — Mon, 17 Jul 2006 00:45:59 GMT

← Older revision		Revision as of 00:45, 17 July 2006
Line 8:		Line 8:
	Apache, along with PHP and MySQL, is very straight forward to install on a stock LinkStation 2 with the OpenLink firmware installed. If you have experience with building these packages, or compiling in general, it is a snap. If you have little or no experience in such matter, just follow the guide -- everything is reversible.		Apache, along with PHP and MySQL, is very straight forward to install on a stock LinkStation 2 with the OpenLink firmware installed. If you have experience with building these packages, or compiling in general, it is a snap. If you have little or no experience in such matter, just follow the guide -- everything is reversible.

-	If you have not already done so, visit the [[Projects/OpenLink \| Openlink]] section and follow the instructions for installing the telnet enabled firmware. You will also need to download and install the [[http://downloads.linkstationwiki.net/development_tools/mipsel-tools-2.tgz MIPSel Tools]] before continuing.	+	If you have not already done so, visit the [[Projects/OpenLink \| Openlink]] section and follow the instructions for installing the telnet enabled firmware. You will also need to download and install the [http://downloads.linkstationwiki.net/development_tools/mipsel-tools-2.tgz MIPSel Tools] before continuing.

	== A Remark on "--prefix" ==		== A Remark on "--prefix" ==
Line 259:		Line 259:
	[[Category:LS2]]		[[Category:LS2]]
	[[Category:Howto]]		[[Category:Howto]]
		+	[[Category:Mediaserver]]

81.151.208.53: /* PHP */

81.151.208.53 — Thu, 13 Jul 2006 16:03:41 GMT

PHP

← Older revision		Revision as of 16:03, 13 July 2006
Line 190:		Line 190:
	./configure --prefix=/mnt/hda/opt/php4 --with-mysql=/mnt/hda/opt/mysql		./configure --prefix=/mnt/hda/opt/php4 --with-mysql=/mnt/hda/opt/mysql
	--with-apxs=/mnt/hda/opt/apache/bin/apxs --with-config-file-path=/mnt/hda/opt/php4/lib		--with-apxs=/mnt/hda/opt/apache/bin/apxs --with-config-file-path=/mnt/hda/opt/php4/lib
		+
		+	If you're wanting swisscenter you need to
		+
		+	./configure --prefix=/mnt/hda/opt/php4 --with-apxs=/mnt/hda/opt/apache/bin/apxs
		+	--with-mysql=/mnt/hda/opt/mysql --with-zlib --with-zlib-dir --with-gd --enable-gd
		+	--with-jpeg-dir=/usr/local --with-png-dir=/usr/local --with-config-file-path=/etc
		+	--enable-mbstring

	Should get this		Should get this

86.135.152.138: /* PHP */

86.135.152.138 — Thu, 13 Jul 2006 10:58:34 GMT

PHP

← Older revision		Revision as of 10:58, 13 July 2006
Line 212:		Line 212:

	make		make
		+
		+	You will get a message
		+
		+	Build complete.
		+	(It is safe to ignore warnings about tempnam and tmpnam).
		+
		+	Then to finish
		+
	make install		make install