Asterisk - the open source soft PBX (PPC) - Revision history

Ramuk at 16:58, 5 March 2009

Ramuk — Thu, 05 Mar 2009 16:58:49 GMT

← Older revision		Revision as of 16:58, 5 March 2009
Line 140:		Line 140:

	Copy the hardware address from the output of the following command for the next step.		Copy the hardware address from the output of the following command for the next step.
-	(eg. xx:xx:xx:xx:xx:xx). ~~Now edit~~ <tt>/etc/asterisk/mobile.conf</tt>	+	(eg. xx:xx:xx:xx:xx:xx). Use this address for <tt>/etc/asterisk/mobile.conf</tt>

-	~~In the first [adapter] stanza where “id=blue” replace the mac address with the one you copied down.~~

	====Pair your cellphone with your "asterisk box"====		====Pair your cellphone with your "asterisk box"====
Line 153:		Line 152:
	# Make your phone discoverable via Bluetooth.		# Make your phone discoverable via Bluetooth.

-		+	+
	hcitool scan		hcitool scan

Line 192:		Line 191:
	# The Usable field tells you whether or not the device supports the Bluetooth Handsfree Profile or Headset profile.		# The Usable field tells you whether or not the device supports the Bluetooth Handsfree Profile or Headset profile.
	# The Type field tells you whether the device is usable as a Phone line (FXO) or a headset (FXS).		# The Type field tells you whether the device is usable as a Phone line (FXO) or a headset (FXS).
-	# The Port field is the number to put in the configuration file.	+	# The Port field is the number to put in the configuration file: <tt>/etc/asterisk/mobile.conf</tt>.

	==Configuration Files==		==Configuration Files==
Line 208:		Line 207:

	<pre>		<pre>
-	[~~my_phone~~]	+	[general]
-	address=xx:xx:xx:xx:xx:xx ; the address of the phone	+
-	port=x ; the port number (from mobile search)	+	interval=30 ; Number of seconds between trying to connect to devices.
-	context=from-mobile ; dialplan context for incoming calls	+
-	adapter=blue ; adapter to use	+	; The following is a list of adapters we use.
		+	; id must be unique and address is the bdaddr of the adapter from hciconfig.
		+	; Each adapter may only have one device (headset or phone) connected at a time.
		+	; Add an [adapter] entry for each adapter you have.
		+
		+	[adapter]
		+	id=blue
		+	address=XX:XX:XX:XX:XX:XX
		+	;forcemaster=yes ; attempt to force adapter into master mode. default is no.
		+	;alignmentdetection=yes ; enable this if you sometimes get 'white noise' on asterisk side of the call
		+	; its a bug in the bluetooth adapter firmware, enabling this will compensate for it.
		+	; default is no.
		+
		+	; The following is a list of the devices we deal with.
		+	; Every device listed below will be available for calls in and out of Asterisk.
		+	; Each device needs an adapter=xxxx entry which determines which bluetooth adapter is used.
		+	; Use the CLI command 'mobile search' to discover devices.
		+	; Use the CLI command 'mobile show devices' to see device status.
		+	;
		+
		+	; To place a call out through a mobile phone use Dial(Mobile/[device]/NNN.....) or Dial(Mobile/gn/NNN......) in your dialplan.
		+
		+	; To call a headset use Dial(Mobile/[device]).
		+
		+	[iphone]
		+
		+	address=00:1B:XX:XX:XX:XX ; the address of the phone
		+	port=8 ; the rfcomm port number (from mobile search)
		+	context=from-mobile ; dialplan context for incoming calls
		+	adapter=blue ; adapter to use
		+	group=1 ; this phone is in channel group 1
		+	;nocallsetup=yes ; set this only if your phone reports that it supports call progress notification, but does not do it. Motorola L6 for example.
		+
	</pre>		</pre>

Ramuk: /* What you'll need */

Ramuk — Wed, 04 Mar 2009 14:54:36 GMT

What you'll need

← Older revision		Revision as of 14:54, 4 March 2009
Line 24:		Line 24:
	\|\| \|\| [[Image:linksys_pap2_01.jpg\|25px]] \|\| \|\| One or more Unlocked [[w:Analog telephony adapter\|Analog telephony adapter]]s or [[w:IP Phone\|IP Phone]]s. Something like the [[w:Linksys PAP2\|Linksys PAP2]] is common. A softphone such as [http://www.zoiper.com/ Zoiper!] can be used as a test bed if you don't have a IP Phone/ATA lying around.		\|\| \|\| [[Image:linksys_pap2_01.jpg\|25px]] \|\| \|\| One or more Unlocked [[w:Analog telephony adapter\|Analog telephony adapter]]s or [[w:IP Phone\|IP Phone]]s. Something like the [[w:Linksys PAP2\|Linksys PAP2]] is common. A softphone such as [http://www.zoiper.com/ Zoiper!] can be used as a test bed if you don't have a IP Phone/ATA lying around.
	\|-		\|-
-	\|\| \|\| [[Image:DBT-120.jpg\|25px]] \|\| \|\| A [[w:Bluetooth\|Bluetooth]] [[w:USB\|USB]] Dongle, preferably one with a [[w:Cambridge Silicon Radio\|Cambridge Silicon Radio]] Chipset (it works better with chan_mobile) The [[w:Dlink\|Dlink]] DBT-120 is listed by default in the ''chan_mobile'' configuration file.	+	\|\| \|\| [[Image:DBT-120.jpg\|25px]] \|\| \|\| A [[w:Bluetooth\|Bluetooth]] [[w:USB\|USB]] Dongle, preferably one with a [[w:Cambridge Silicon Radio\|Cambridge Silicon Radio]] Chipset (it works better with chan_mobile) The [[w:Dlink\|Dlink]] [http://www.dlink.com/search/?qry=dbt120 DBT-120] is listed by default in the ''chan_mobile'' configuration file.
	\|-		\|-
	\|\| \|\| [[Image:Iphone.jpg\|25px]] \|\| \|\| A [[w:Bluetooth\|Bluetooth]] capable [[w:Mobile Phone\|Cell Phone]] of course! Review the [http://www.voip-info.org/wiki/view/chan_mobile chan_mobile - Voip-info.org] page to see if your bluetooth dongle and bluetooth cellphone will work properly.		\|\| \|\| [[Image:Iphone.jpg\|25px]] \|\| \|\| A [[w:Bluetooth\|Bluetooth]] capable [[w:Mobile Phone\|Cell Phone]] of course! Review the [http://www.voip-info.org/wiki/view/chan_mobile chan_mobile - Voip-info.org] page to see if your bluetooth dongle and bluetooth cellphone will work properly.

Ramuk: /* Pair your phone with your "asterisk box" */

Ramuk — Tue, 03 Mar 2009 15:39:50 GMT

Pair your phone with your "asterisk box"

← Older revision		Revision as of 15:39, 3 March 2009
Line 144:		Line 144:
	In the first [adapter] stanza where “id=blue” replace the mac address with the one you copied down.		In the first [adapter] stanza where “id=blue” replace the mac address with the one you copied down.

-	====Pair your ~~phone~~ with your "asterisk box"====	+	====Pair your cellphone with your "asterisk box"====

	dbus-send --system --type=method_call --print-reply --dest=org.bluez /org/bluez/hci0 org.bluez.Adapter.SetMode string:discoverable		dbus-send --system --type=method_call --print-reply --dest=org.bluez /org/bluez/hci0 org.bluez.Adapter.SetMode string:discoverable
Line 192:		Line 192:
	# The Usable field tells you whether or not the device supports the Bluetooth Handsfree Profile or Headset profile.		# The Usable field tells you whether or not the device supports the Bluetooth Handsfree Profile or Headset profile.
	# The Type field tells you whether the device is usable as a Phone line (FXO) or a headset (FXS).		# The Type field tells you whether the device is usable as a Phone line (FXO) or a headset (FXS).
-	# The Port field is the number to put in the configuration file.	+	# The Port field is the number to put in the configuration file.

	==Configuration Files==		==Configuration Files==

Ramuk: /* Install various pre-requisite libraries */

Ramuk — Mon, 02 Mar 2009 19:47:14 GMT

Install various pre-requisite libraries

← Older revision		Revision as of 19:47, 2 March 2009
Line 72:		Line 72:
	apt-get install unixodbc		apt-get install unixodbc
	apt-get install zlib1g		apt-get install zlib1g
		+	apt-get install bluetooth bluez-utils libbluetooth2 libbluetooth2-dev

	===Get Asterisk package===		===Get Asterisk package===

Ramuk: /* Prerequisites */

Ramuk — Mon, 02 Mar 2009 19:40:33 GMT

Prerequisites

← Older revision		Revision as of 19:40, 2 March 2009
Line 13:		Line 13:

	=== Prerequisites ===		=== Prerequisites ===
-	This article assumes that you have installed [[FreeLink]] on PPC Box that has been [[U-boot bootloader\|U-booted]]. You also will need to upgrade to a 2.6.28+ Kernel, (the bluetooth SCO audio driver doesn't seem to work right otherwise.	+	This article assumes that you have installed [[FreeLink]] on PPC Box that has been [[U-boot bootloader\|U-booted]]. You also will need to upgrade to a 2.6.28+ Kernel, (the bluetooth SCO audio driver doesn't seem to work right otherwise).
-		+
-	In order to implement this on a ARM box you would need to cross compile asterisk, as it will not natively compile on this architecture. Your results may vary with MIPSel, but this article might be a good starting point: [[Asterisk - the open source soft PBX (MIPSel)]]	+

		+	In order to implement this on a ARM box you would need to cross compile asterisk, as it will not natively compile on this architecture. Your results may vary with MIPSel, but this article might be a good starting point: [[Asterisk - the open source soft PBX (MIPSel)]]

	===What you'll need===		===What you'll need===

Ramuk: /* What you'll need */

Ramuk — Mon, 02 Mar 2009 19:40:19 GMT

What you'll need

← Older revision		Revision as of 19:40, 2 March 2009
Line 23:		Line 23:
	\|\| [[Image:Kuro-box.jpg\|25px]] \|\| or \|\| [[Image:HD-H(G).jpg\|25px]] \|\| A [[FreeLink]]ed PowerPC Linkstation like a [[LS1]], [[HG]], or [[Kurobox]]. You will need to have the [[U-boot bootloader]] installed to load a 2.6.28+ Kernel with modules (which you'll have to make too).		\|\| [[Image:Kuro-box.jpg\|25px]] \|\| or \|\| [[Image:HD-H(G).jpg\|25px]] \|\| A [[FreeLink]]ed PowerPC Linkstation like a [[LS1]], [[HG]], or [[Kurobox]]. You will need to have the [[U-boot bootloader]] installed to load a 2.6.28+ Kernel with modules (which you'll have to make too).
	\|-		\|-
-	\|\| \|\| [[Image:linksys_pap2_01.jpg\|25px]] \|\| \|\| One or more Unlocked [[w:Analog telephony adapter\|Analog telephony adapter]]s or [[w:IP Phone\|IP Phone]]s. ~~Such as~~ the [[w:Linksys PAP2\|Linksys PAP2]]. ~~You could also use a~~ softphone such as [http://www.zoiper.com/ Zoiper!] as a test bed if you ~~didn~~'t have a IP Phone/ATA.	+	\|\| \|\| [[Image:linksys_pap2_01.jpg\|25px]] \|\| \|\| One or more Unlocked [[w:Analog telephony adapter\|Analog telephony adapter]]s or [[w:IP Phone\|IP Phone]]s. Something like the [[w:Linksys PAP2\|Linksys PAP2]] is common. A softphone such as [http://www.zoiper.com/ Zoiper!] can be used as a test bed if you don't have a IP Phone/ATA lying around.
	\|-		\|-
-	\|\| \|\| [[Image:DBT-120.jpg\|25px]] \|\| \|\| A [[w:Bluetooth\|Bluetooth]] [[w:USB\|USB]] Dongle, preferably one with a [[w:Cambridge Silicon Radio\|Cambridge Silicon Radio]] Chipset (it works better with chan_mobile) The [[w:Dlink\|Dlink]] DBT-120 is ~~mentioned most often~~	+	\|\| \|\| [[Image:DBT-120.jpg\|25px]] \|\| \|\| A [[w:Bluetooth\|Bluetooth]] [[w:USB\|USB]] Dongle, preferably one with a [[w:Cambridge Silicon Radio\|Cambridge Silicon Radio]] Chipset (it works better with chan_mobile) The [[w:Dlink\|Dlink]] DBT-120 is listed by default in the ''chan_mobile'' configuration file.
	\|-		\|-
	\|\| \|\| [[Image:Iphone.jpg\|25px]] \|\| \|\| A [[w:Bluetooth\|Bluetooth]] capable [[w:Mobile Phone\|Cell Phone]] of course! Review the [http://www.voip-info.org/wiki/view/chan_mobile chan_mobile - Voip-info.org] page to see if your bluetooth dongle and bluetooth cellphone will work properly.		\|\| \|\| [[Image:Iphone.jpg\|25px]] \|\| \|\| A [[w:Bluetooth\|Bluetooth]] capable [[w:Mobile Phone\|Cell Phone]] of course! Review the [http://www.voip-info.org/wiki/view/chan_mobile chan_mobile - Voip-info.org] page to see if your bluetooth dongle and bluetooth cellphone will work properly.

Ramuk at 19:37, 2 March 2009

Ramuk — Mon, 02 Mar 2009 19:37:22 GMT

← Older revision		Revision as of 19:37, 2 March 2009
Line 16:		Line 16:

	In order to implement this on a ARM box you would need to cross compile asterisk, as it will not natively compile on this architecture. Your results may vary with MIPSel, but this article might be a good starting point: [[Asterisk - the open source soft PBX (MIPSel)]]		In order to implement this on a ARM box you would need to cross compile asterisk, as it will not natively compile on this architecture. Your results may vary with MIPSel, but this article might be a good starting point: [[Asterisk - the open source soft PBX (MIPSel)]]
-		+
-	~~Review the [http://www.voip-info.org/wiki/view/chan_mobile chan_mobile - Voip-info.org] page to see if your bluetooth dongle and bluetooth cellphone will work properly.~~	+

	===What you'll need===		===What you'll need===
Line 27:		Line 26:
	\|-		\|-
	\|\| \|\| [[Image:DBT-120.jpg\|25px]] \|\| \|\| A [[w:Bluetooth\|Bluetooth]] [[w:USB\|USB]] Dongle, preferably one with a [[w:Cambridge Silicon Radio\|Cambridge Silicon Radio]] Chipset (it works better with chan_mobile) The [[w:Dlink\|Dlink]] DBT-120 is mentioned most often		\|\| \|\| [[Image:DBT-120.jpg\|25px]] \|\| \|\| A [[w:Bluetooth\|Bluetooth]] [[w:USB\|USB]] Dongle, preferably one with a [[w:Cambridge Silicon Radio\|Cambridge Silicon Radio]] Chipset (it works better with chan_mobile) The [[w:Dlink\|Dlink]] DBT-120 is mentioned most often
		+	\|-
		+	\|\| \|\| [[Image:Iphone.jpg\|25px]] \|\| \|\| A [[w:Bluetooth\|Bluetooth]] capable [[w:Mobile Phone\|Cell Phone]] of course! Review the [http://www.voip-info.org/wiki/view/chan_mobile chan_mobile - Voip-info.org] page to see if your bluetooth dongle and bluetooth cellphone will work properly.
	\|}		\|}

Ramuk at 19:25, 2 March 2009

Ramuk — Mon, 02 Mar 2009 19:25:44 GMT

← Older revision		Revision as of 19:25, 2 March 2009
Line 1:		Line 1:
	{{Underconstruction\|Asterisk - the open source soft PBX (PPC)}}		{{Underconstruction\|Asterisk - the open source soft PBX (PPC)}}
-	{{Warning\| Your results may vary if you try to implement what you see here}}	+	{{Warning\| Your results may vary if you try to implement what you see here, specifically I'm not sure about all of the packages needed to get Asterisk to compile properly. And I have had some significant problems in getting bluetooth audio (SCO) to work properly to channel the calls from the cellphone to asterisk}}

	{{Template:Articles\|LS1 \| HG }}		{{Template:Articles\|LS1 \| HG }}

Ramuk at 19:24, 2 March 2009

Ramuk — Mon, 02 Mar 2009 19:24:06 GMT

← Older revision		Revision as of 19:24, 2 March 2009
Line 1:		Line 1:
-	{{Underconstruction\|~~Editing~~ Asterisk - the open source soft PBX (PPC)}}	+	{{Underconstruction\|Asterisk - the open source soft PBX (PPC)}}
	{{Warning\| Your results may vary if you try to implement what you see here}}		{{Warning\| Your results may vary if you try to implement what you see here}}

Ramuk at 19:23, 2 March 2009

Ramuk — Mon, 02 Mar 2009 19:23:54 GMT

← Older revision		Revision as of 19:23, 2 March 2009
Line 1:		Line 1:
-	{{Underconstruction\|~~This~~}}	+	{{Underconstruction\|Editing Asterisk - the open source soft PBX (PPC)}}
	{{Warning\| Your results may vary if you try to implement what you see here}}		{{Warning\| Your results may vary if you try to implement what you see here}}

← Older revision		Revision as of 19:25, 2 March 2009
Line 1:		Line 1:
	{{Underconstruction\|Asterisk - the open source soft PBX (PPC)}}		{{Underconstruction\|Asterisk - the open source soft PBX (PPC)}}
-	{{Warning\| Your results may vary if you try to implement what you see here}}	+	{{Warning\| Your results may vary if you try to implement what you see here, specifically I'm not sure about all of the packages needed to get Asterisk to compile properly. And I have had some significant problems in getting bluetooth audio (SCO) to work properly to channel the calls from the cellphone to asterisk}}

	{{Template:Articles\|LS1 \| HG }}		{{Template:Articles\|LS1 \| HG }}