From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 17:48, 18 July 2007 by Ramuk (Talk | contribs)

Jump to: navigation, search

A JTAG interface is a special four/five-pin interface added to a chip, designed so that multiple chips on a board can have their JTAG lines daisy-chained together, and a test probe need only connect to a single "JTAG port" to have access to all chips on a circuit board. The connector pins are

  1. TDI (Test Data In)
  2. TDO (Test Data Out)
  3. TCK (Test Clock)
  4. TMS (Test Mode Select)
  5. TRST (Test ReSeT) optional.

300px-Jtag_chain.svg.png Category:Disambig