From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 17:48, 18 July 2007 by Ramuk (Talk | contribs)

Jump to: navigation, search

A JTAG interface is a special four/five-pin interface added to a chip, designed so that multiple chips on a board can have their JTAG lines daisy-chained together, and a test probe need only connect to a single "JTAG port" to have access to all chips on a circuit board. The connector pins are

  1. TDI (Test Data In)
  2. TDO (Test Data Out)
  3. TCK (Test Clock)
  4. TMS (Test Mode Select)
  5. TRST (Test ReSeT) optional.