Difference between revisions of "Category:LS-CHL"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
m
m (update scripts)
 
(15 intermediate revisions by 8 users not shown)
Line 7: Line 7:
 
| '''LinkStation Live™ with BitTorrent'''
 
| '''LinkStation Live™ with BitTorrent'''
 
|-valign="top"
 
|-valign="top"
|align="right" |  '''CPU'''  
+
|align="right" |  '''CPU''' ||88F5182 266Mhz Clock Speed
 
|
 
|
 
|-valign="top"
 
|-valign="top"
|align="right" | '''RAM'''
+
|align="right" | '''RAM''' ||128Mb, on to blocks NANYA NT5TU32M16AG-3C
 
|
 
|
 
|-valign="top"
 
|-valign="top"
Line 20: Line 20:
 
|  
 
|  
 
|- valign="top"
 
|- valign="top"
|align="right" | '''NIC'''
+
|align="right" | '''NIC''' || 1000/100/10Mbpsls-chl
 
|
 
|
 
|-valign="top"
 
|-valign="top"
Line 26: Line 26:
 
|
 
|
 
|- valign="top"
 
|- valign="top"
|align="right" | '''internal HDD'''
+
|align="right" | '''internal HDD''' || 1TB Model has a Samsung F1 DT HD103UJ, with 32MB Cache, 7200RPM Sata disk <br/>
 +
other disks found are:<br/>
 +
Seagate Barracuda 7200.11 ST31000340AS, 32MB Cache, 7200RPM sATA<br/>
 +
Western Digital WD10WADS, 32MB Cache
 
|  
 
|  
 
|- valign="top"
 
|- valign="top"
Line 35: Line 38:
 
|
 
|
 
|-valign="top"
 
|-valign="top"
| align="right" |'''Fan'''
+
| align="right" |'''Fan''' || one in the case
 
|
 
|
 
|-valign="top"
 
|-valign="top"
Line 60: Line 63:
 
|-
 
|-
 
!|GPL Kernel
 
!|GPL Kernel
||  
+
||mainline support, enable gpio_fans module
 
|-
 
|-
 
||
 
||
Line 66: Line 69:
 
|-
 
|-
 
!| Disassembly
 
!| Disassembly
||
+
||http://www.yamasita.jp/linkstation/2008/11/081112__disassemble.html
 
|-
 
|-
 
!| Serial
 
!| Serial
||
+
||http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html
 
|-
 
|-
 
!| Hardware Hacks
 
!| Hardware Hacks
||
+
|| Possible hack allowing addition of a USB-B port, allowing device to act as a USB gadget. Kernel modules incomplete.
 
|-
 
|-
 
!| Other
 
!| Other
Line 78: Line 81:
 
|}
 
|}
  
* http://www.buffalo-technology.com/products/network-storage/linkstation/linkstation-live-with-bittorrent/
+
* http://pc.pcconnection.com/1/1/231937-buffalo-technology-500gb-linkstation-live-ls-chl-shared-multimedia-storage-ls-ch500l.html
+
==Description==
* http://buffalo.nas-central.org/forums/viewtopic.php?f=37&t=11391
+
 
 +
Buffalo LinkStation Live is a Network Attached Storage built in DLNA Server, desined for home networking to share your documents, pictures, movie and music over a network.
 +
 
 +
You can store contents from network computers or using the one touch direct copy function, that is a means of taking pictures or movies from your digital camera, camcorder and storage device via USB port directly. Stored data can be shared on your network and a built-in DLNA media server can stream it to a PC, a MAC, a Buffalo LinkTheater an other DLNA CERTIFIED™ entertainment devices. Our Web Access feature enables you to access your data and media stored in the LinkStation via the interenet by computuers and iPhone's. With a built-in BitTorrent Client, LinkStation can download content without the requirement to keep your PC powered up.
 +
 
 +
Intelligent Power Saving functions, timer power on/off and auto power on/off with your Windows PC all help towards power saving and eco in mind.
 +
==Features==
 +
* With Web Access you can store, share and access files from any web browser
 +
* Use Web Access for iPhone to access the digital library on your LinkStation
 +
* Built-In Media Server connects to DLNA compatible digital entertainment devices
 +
* One touch transfer of media files from digital camera/camcorder with Direct Copy feature
 +
* Seamlessly integrates with iTunes® 7 and allows you to access your music files on the LinkStation from your iTunes software
 +
* Supports Apple Time Machine
 +
* Built-In BitTorrent Client
 +
* Eco Friendly Power Saving Mode (PC Interlocking Power System/Schedule Power Management System)
 +
* Built-in print server to print documents from anywhere on your network (*1)
 +
* Easy setup does not require drivers
 +
* Supports UPS connectivity via USB port
 +
* Expand storage by adding a USB 2.0 hard drive
 +
* Includes Memeo™ AutoBackup Software for Windows or Macintosh
 +
* 10/100/1000 Gigabit Ethernet with JumboFrame support
 +
* Access your data from any Windows or Macintosh computers
 +
 
 +
==GPL Kernel==
 +
* Can't use stock distro, use Debian
 +
* After compiling the kernel with ls-chl support and appropriate modules, run the following commands:
 +
 
 +
  devio > foo 'wl 0xe3a01c0B,4' 'wl 0xe3811061,4'
 +
  cat foo arch/arm/boot/zImage > zImage.new
 +
  mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n 'linux' -d zImage.new uImage.buffalo
 +
 
 +
* For correct fan support, the  gpio-fan module needs to be enabled and the following script (updated for Wheezy), or similar, set to run on startup (/usr/sbin/fannyd):
 +
 
 +
#! /bin/sh
 +
#
 +
#  fan-temperature control daemon - fannydee
 +
#
 +
#  this script checks the hdd temp on any LS-PPC that is running avr_evtd
 +
#  and has hddtemp installed.  If the temperature is greater than the
 +
#  defined limit, it kicks the fan up to high speed.
 +
#
 +
#  After the checkperiod elapses, it checks again.  If the temperature is
 +
#  below that limit, then it drops it back to low speed.
 +
#
 +
#
 +
#  In /etc/fannyd.conf, mak sure you define your devices that you want to check the temperature on
 +
#  e.g.  /dev/hda  or /dev/sda , the temperature limit, time check, etc.
 +
#  You can declare more than one hard drive, but that is not a likely situation. 
 +
 +
. /etc/fannyd.conf
 +
HDDT=`which hddtemp`
 +
      while : ; do
 +
 +
              for  A in $DEVICES ; do
 +
                      TEMPERATURE=$($HDDT -n $A)
 +
                      if [ $TEMPERATURE -gt $TEMPLIMITONE ]; then
 +
                              if [ $TEMPERATURE -gt $TEMPLIMITTWO ]; then
 +
                                      if [ $TEMPERATURE -gt $TEMPLIMITTHREE ]; then
 +
                                              echo 5000 > /sys/class/hwmon/hwmon0/device/fan1_target
 +
                                              sleep 40
 +
                                      else
 +
                                              echo 3250 > /sys/class/hwmon/hwmon0/device/fan1_target
 +
                                              sleep 40
 +
                                      fi
 +
                              else
 +
                                      echo 1500 > /sys/class/hwmon/hwmon0/device/fan1_target
 +
                                      sleep 40
 +
                              fi
 +
                      else
 +
                              sleep 60    # overcompensate w/ 1 min of extra fan time
 +
                              echo 0 > /sys/class/hwmon/hwmon0/device/fan1_target
 +
                      fi
 +
              done
 +
 +
      done
 +
 +
exit  0
 +
 
 +
* init Script for Wheezy (/etc/init.d/fannyd), add to startup with 'update-rc.d fannyd defaults'
 +
 
 +
#! /bin/sh
 +
### BEGIN INIT INFO
 +
# Provides:          fannyd
 +
# Required-Start:    $remote_fs $syslog
 +
# Required-Stop:    $remote_fs $syslog
 +
# Default-Start:    2 3 4 5
 +
# Default-Stop:      0 1 6
 +
# Short-Description: Fan Control Daemon
 +
# Description:      Controls GPIO-Fan based fans using hddtemp
 +
#                   
 +
### END INIT INFO
 +
 +
# Author: Ash Hughes <ashes-iontach@hotmail.com>
 +
#
 +
# Please remove the "Author" lines above and replace them
 +
# with your own name if you copy and modify this script.
 +
 +
# Do NOT "set -e"
 +
 +
# PATH should only include /usr/* if it runs after the mountnfs.sh script
 +
PATH=/sbin:/usr/sbin:/bin:/usr/bin
 +
DESC="Fan control daemon"
 +
NAME=fannyd
 +
DAEMON=/usr/sbin/$NAME
 +
DAEMON_ARGS=""
 +
PIDFILE=/var/run/$NAME.pid
 +
SCRIPTNAME=/etc/init.d/$NAME
 +
 +
# Exit if the package is not installed
 +
[ -x "$DAEMON" ] || exit 0
 +
 +
# Read configuration variable file if it is present
 +
[ -r /etc/default/$NAME ] && . /etc/default/$NAME
 +
 +
# Load the VERBOSE setting and other rcS variables
 +
. /lib/init/vars.sh
 +
 +
# Define LSB log_* functions.
 +
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
 +
# and status_of_proc is working.
 +
. /lib/lsb/init-functions
 +
 +
#
 +
# Function that starts the daemon/service
 +
#
 +
do_start()
 +
{
 +
# Return
 +
#  0 if daemon has been started
 +
#  1 if daemon was already running
 +
#  2 if daemon could not be started
 +
start-stop-daemon --make-pidfile --background --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
 +
|| return 1
 +
start-stop-daemon --make-pidfile --background --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
 +
$DAEMON_ARGS \
 +
|| return 2
 +
# Add code here, if necessary, that waits for the process to be ready
 +
# to handle requests from services started subsequently which depend
 +
# on this one.  As a last resort, sleep for some time.
 +
}
 +
 +
#
 +
# Function that stops the daemon/service
 +
#
 +
do_stop()
 +
{
 +
# Return
 +
#  0 if daemon has been stopped
 +
#  1 if daemon was already stopped
 +
#  2 if daemon could not be stopped
 +
#  other if a failure occurred
 +
start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
 +
RETVAL="$?"
 +
[ "$RETVAL" = 2 ] && return 2
 +
# Wait for children to finish too if this is a daemon that forks
 +
# and if the daemon is only ever run from this initscript.
 +
# If the above conditions are not satisfied then add some other code
 +
# that waits for the process to drop all resources that could be
 +
# needed by services started subsequently.  A last resort is to
 +
# sleep for some time.
 +
start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
 +
[ "$?" = 2 ] && return 2
 +
# Many daemons don't delete their pidfiles when they exit.
 +
rm -f $PIDFILE
 +
return "$RETVAL"
 +
}
 +
 +
#
 +
# Function that sends a SIGHUP to the daemon/service
 +
#
 +
do_reload() {
 +
#
 +
# If the daemon can reload its configuration without
 +
# restarting (for example, when it is sent a SIGHUP),
 +
# then implement that here.
 +
#
 +
start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
 +
return 0
 +
}
 +
 +
case "$1" in
 +
  start)
 +
[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
 +
do_start
 +
case "$?" in
 +
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
 +
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
 +
esac
 +
;;
 +
  stop)
 +
[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
 +
do_stop
 +
case "$?" in
 +
0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
 +
2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
 +
esac
 +
;;
 +
  status)
 +
status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
 +
;;
 +
  #reload|force-reload)
 +
#
 +
# If do_reload() is not implemented then leave this commented out
 +
# and leave 'force-reload' as an alias for 'restart'.
 +
#
 +
#log_daemon_msg "Reloading $DESC" "$NAME"
 +
#do_reload
 +
#log_end_msg $?
 +
#;;
 +
  restart|force-reload)
 +
#
 +
# If the "reload" option is implemented then remove the
 +
# 'force-reload' alias
 +
#
 +
log_daemon_msg "Restarting $DESC" "$NAME"
 +
do_stop
 +
case "$?" in
 +
  0|1)
 +
do_start
 +
case "$?" in
 +
0) log_end_msg 0 ;;
 +
1) log_end_msg 1 ;; # Old process is still running
 +
*) log_end_msg 1 ;; # Failed to start
 +
esac
 +
;;
 +
  *)
 +
# Failed to stop
 +
log_end_msg 1
 +
;;
 +
esac
 +
;;
 +
  *)
 +
#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
 +
echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
 +
exit 3
 +
;;
 +
esac
 +
 +
:
 +
 
 +
 
 +
* Sample /etc/fannyd.conf
 +
 
 +
#  config file for fan-temperature control daemon - fannydee
 +
#
 +
#  After the checkperiod elapses, it checks again.  If the temperature is
 +
#  below that limit, then it drops it back to low speed.
 +
#
 +
#  Define your devices that you want to check the temperature on
 +
#  e.g.  /dev/hda  or /dev/sda
 +
#  You can declare more than one, but that is not a likely situation.
 +
 +
DEVICES=/dev/sda
 +
 +
#
 +
#  define the timelimit in seconds.  It is suggested to use a value
 +
#  around 300 to 600 seconds
 +
#
 +
 +
CHECKPERIOD=600
 +
 +
#
 +
#  define a temperature limit at which you want the fan to kick up at
 +
#  a good value is around 38C.  Yes, use celsius.
 +
 +
TEMPLIMITONE=35
 +
TEMPLIMITTWO=40
 +
TEMPLIMITTHREE=44
 +
 
 +
 
 +
==References==
 +
* [http://www.buffalo-technology.com/products/network-storage/linkstation/linkstation-live-with-bittorrent/ buffalo-technology.com: LinkStation Live™ with BitTorrent]
 +
* [http://pc.pcconnection.com/1/1/231937-buffalo-technology-500gb-linkstation-live-ls-chl-shared-multimedia-storage-ls-ch500l.html pcconnection.com: LinkStation Live LS-CHL Shared Multimedia Storage]
 +
* [http://buffalo.nas-central.org/forums/viewtopic.php?f=37&t=11391 The Buffalo NAS hacking Forums: LS-CHL LinkStation Live]
 +
* [http://forum.buffalo.nas-central.org/viewtopic.php?f=71&t=21499]
 +
 
 +
==Related devices==
 +
* [[:Category:LS-XHL|LinkStation Pro™ LS-XHL]], a scaled-up version with more RAM (256MB) and a faster CPU
 +
* [[:Category:LS-CHLv2|LinkStation Live™ LS-CHL]], a faster CPU (600MHz) but less RAM

Latest revision as of 22:00, 19 June 2013

LinkStation Live™ with BitTorrent


LinkStation Live™ with BitTorrent
CPU 88F5182 266Mhz Clock Speed
RAM 128Mb, on to blocks NANYA NT5TU32M16AG-3C
Flash ROM
Other
NIC 1000/100/10Mbpsls-chl
USB
internal HDD 1TB Model has a Samsung F1 DT HD103UJ, with 32MB Cache, 7200RPM Sata disk

other disks found are:
Seagate Barracuda 7200.11 ST31000340AS, 32MB Cache, 7200RPM sATA
Western Digital WD10WADS, 32MB Cache

IDE/SATA Controller
Drive Capacity
Fan one in the case
initial Networkname
SOFTWARE
Toolchains
Opened Firmwares
  • Telnet enabled firmware
  • Distributions
Development Tools
GPL Kernel mainline support, enable gpio_fans module
HARDWARE
Disassembly http://www.yamasita.jp/linkstation/2008/11/081112__disassemble.html
Serial http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html
Hardware Hacks Possible hack allowing addition of a USB-B port, allowing device to act as a USB gadget. Kernel modules incomplete.
Other


Contents

Description

Buffalo LinkStation Live is a Network Attached Storage built in DLNA Server, desined for home networking to share your documents, pictures, movie and music over a network.

You can store contents from network computers or using the one touch direct copy function, that is a means of taking pictures or movies from your digital camera, camcorder and storage device via USB port directly. Stored data can be shared on your network and a built-in DLNA media server can stream it to a PC, a MAC, a Buffalo LinkTheater an other DLNA CERTIFIED™ entertainment devices. Our Web Access feature enables you to access your data and media stored in the LinkStation via the interenet by computuers and iPhone's. With a built-in BitTorrent Client, LinkStation can download content without the requirement to keep your PC powered up.

Intelligent Power Saving functions, timer power on/off and auto power on/off with your Windows PC all help towards power saving and eco in mind.

Features

  • With Web Access you can store, share and access files from any web browser
  • Use Web Access for iPhone to access the digital library on your LinkStation
  • Built-In Media Server connects to DLNA compatible digital entertainment devices
  • One touch transfer of media files from digital camera/camcorder with Direct Copy feature
  • Seamlessly integrates with iTunes® 7 and allows you to access your music files on the LinkStation from your iTunes software
  • Supports Apple Time Machine
  • Built-In BitTorrent Client
  • Eco Friendly Power Saving Mode (PC Interlocking Power System/Schedule Power Management System)
  • Built-in print server to print documents from anywhere on your network (*1)
  • Easy setup does not require drivers
  • Supports UPS connectivity via USB port
  • Expand storage by adding a USB 2.0 hard drive
  • Includes Memeo™ AutoBackup Software for Windows or Macintosh
  • 10/100/1000 Gigabit Ethernet with JumboFrame support
  • Access your data from any Windows or Macintosh computers

GPL Kernel

  • Can't use stock distro, use Debian
  • After compiling the kernel with ls-chl support and appropriate modules, run the following commands:
 devio > foo 'wl 0xe3a01c0B,4' 'wl 0xe3811061,4'
 cat foo arch/arm/boot/zImage > zImage.new
 mkimage -A arm -O linux -T kernel -C none -a 0x00008000 -e 0x00008000 -n 'linux' -d zImage.new uImage.buffalo
  • For correct fan support, the gpio-fan module needs to be enabled and the following script (updated for Wheezy), or similar, set to run on startup (/usr/sbin/fannyd):
#! /bin/sh
#
#  fan-temperature control daemon - fannydee
#
#  this script checks the hdd temp on any LS-PPC that is running avr_evtd
#  and has hddtemp installed.  If the temperature is greater than the
#  defined limit, it kicks the fan up to high speed.
#
#  After the checkperiod elapses, it checks again.  If the temperature is
#  below that limit, then it drops it back to low speed.
#
#
#  In /etc/fannyd.conf, mak sure you define your devices that you want to check the temperature on
#  e.g.  /dev/hda  or /dev/sda , the temperature limit, time check, etc.
#  You can declare more than one hard drive, but that is not a likely situation.   

. /etc/fannyd.conf
HDDT=`which hddtemp`
      while : ; do

              for  A in $DEVICES ; do
                      TEMPERATURE=$($HDDT -n $A)
                      if [ $TEMPERATURE -gt $TEMPLIMITONE ]; then
                              if [ $TEMPERATURE -gt $TEMPLIMITTWO ]; then
                                      if [ $TEMPERATURE -gt $TEMPLIMITTHREE ]; then
                                              echo 5000 > /sys/class/hwmon/hwmon0/device/fan1_target
                                              sleep 40
                                      else
                                              echo 3250 > /sys/class/hwmon/hwmon0/device/fan1_target
                                              sleep 40
                                      fi
                              else
                                      echo 1500 > /sys/class/hwmon/hwmon0/device/fan1_target
                                      sleep 40
                              fi
                      else
                              sleep 60     # overcompensate w/ 1 min of extra fan time
                              echo 0 > /sys/class/hwmon/hwmon0/device/fan1_target
                      fi
              done 

      done

exit  0
  • init Script for Wheezy (/etc/init.d/fannyd), add to startup with 'update-rc.d fannyd defaults'
#! /bin/sh
### BEGIN INIT INFO
# Provides:          fannyd 
# Required-Start:    $remote_fs $syslog
# Required-Stop:     $remote_fs $syslog
# Default-Start:     2 3 4 5
# Default-Stop:      0 1 6
# Short-Description: Fan Control Daemon
# Description:       Controls GPIO-Fan based fans using hddtemp
#                    
### END INIT INFO

# Author: Ash Hughes <ashes-iontach@hotmail.com>
#
# Please remove the "Author" lines above and replace them
# with your own name if you copy and modify this script.

# Do NOT "set -e"

# PATH should only include /usr/* if it runs after the mountnfs.sh script
PATH=/sbin:/usr/sbin:/bin:/usr/bin
DESC="Fan control daemon"
NAME=fannyd
DAEMON=/usr/sbin/$NAME
DAEMON_ARGS=""
PIDFILE=/var/run/$NAME.pid
SCRIPTNAME=/etc/init.d/$NAME

# Exit if the package is not installed
[ -x "$DAEMON" ] || exit 0

# Read configuration variable file if it is present
[ -r /etc/default/$NAME ] && . /etc/default/$NAME

# Load the VERBOSE setting and other rcS variables
. /lib/init/vars.sh

# Define LSB log_* functions.
# Depend on lsb-base (>= 3.2-14) to ensure that this file is present
# and status_of_proc is working.
. /lib/lsb/init-functions

#
# Function that starts the daemon/service
#
do_start()
{
	# Return
	#   0 if daemon has been started
	#   1 if daemon was already running
	#   2 if daemon could not be started
	start-stop-daemon --make-pidfile --background --start --quiet --pidfile $PIDFILE --exec $DAEMON --test > /dev/null \
		|| return 1
	start-stop-daemon --make-pidfile --background --start --quiet --pidfile $PIDFILE --exec $DAEMON -- \
		$DAEMON_ARGS \
		|| return 2
	# Add code here, if necessary, that waits for the process to be ready
	# to handle requests from services started subsequently which depend
	# on this one.  As a last resort, sleep for some time.
}

#
# Function that stops the daemon/service
#
do_stop()
{
	# Return
	#   0 if daemon has been stopped
	#   1 if daemon was already stopped
	#   2 if daemon could not be stopped
	#   other if a failure occurred
	start-stop-daemon --stop --quiet --retry=TERM/30/KILL/5 --pidfile $PIDFILE --name $NAME
	RETVAL="$?"
	[ "$RETVAL" = 2 ] && return 2
	# Wait for children to finish too if this is a daemon that forks
	# and if the daemon is only ever run from this initscript.
	# If the above conditions are not satisfied then add some other code
	# that waits for the process to drop all resources that could be
	# needed by services started subsequently.  A last resort is to
	# sleep for some time.
	start-stop-daemon --stop --quiet --oknodo --retry=0/30/KILL/5 --exec $DAEMON
	[ "$?" = 2 ] && return 2
	# Many daemons don't delete their pidfiles when they exit.
	rm -f $PIDFILE
	return "$RETVAL"
}

#
# Function that sends a SIGHUP to the daemon/service
#
do_reload() {
	#
	# If the daemon can reload its configuration without
	# restarting (for example, when it is sent a SIGHUP),
	# then implement that here.
	#
	start-stop-daemon --stop --signal 1 --quiet --pidfile $PIDFILE --name $NAME
	return 0
}

case "$1" in
  start)
	[ "$VERBOSE" != no ] && log_daemon_msg "Starting $DESC" "$NAME"
	do_start
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
  stop)
	[ "$VERBOSE" != no ] && log_daemon_msg "Stopping $DESC" "$NAME"
	do_stop
	case "$?" in
		0|1) [ "$VERBOSE" != no ] && log_end_msg 0 ;;
		2) [ "$VERBOSE" != no ] && log_end_msg 1 ;;
	esac
	;;
  status)
	status_of_proc "$DAEMON" "$NAME" && exit 0 || exit $?
	;;
  #reload|force-reload)
	#
	# If do_reload() is not implemented then leave this commented out
	# and leave 'force-reload' as an alias for 'restart'.
	#
	#log_daemon_msg "Reloading $DESC" "$NAME"
	#do_reload
	#log_end_msg $?
	#;;
  restart|force-reload)
	#
	# If the "reload" option is implemented then remove the
	# 'force-reload' alias
	#
	log_daemon_msg "Restarting $DESC" "$NAME"
	do_stop
	case "$?" in
	  0|1)
		do_start
		case "$?" in
			0) log_end_msg 0 ;;
			1) log_end_msg 1 ;; # Old process is still running
			*) log_end_msg 1 ;; # Failed to start
		esac
		;;
	  *)
		# Failed to stop
		log_end_msg 1
		;;
	esac
	;;
  *)
	#echo "Usage: $SCRIPTNAME {start|stop|restart|reload|force-reload}" >&2
	echo "Usage: $SCRIPTNAME {start|stop|status|restart|force-reload}" >&2
	exit 3
	;;
esac

:


  • Sample /etc/fannyd.conf
#  config file for fan-temperature control daemon - fannydee
#
#  After the checkperiod elapses, it checks again.  If the temperature is
#  below that limit, then it drops it back to low speed.
#
#  Define your devices that you want to check the temperature on 
#  e.g.  /dev/hda  or /dev/sda
#  You can declare more than one, but that is not a likely situation. 

DEVICES=/dev/sda

# 
#  define the timelimit in seconds.  It is suggested to use a value 
#  around 300 to 600 seconds
#

CHECKPERIOD=600

#
#  define a temperature limit at which you want the fan to kick up at
#  a good value is around 38C.  Yes, use celsius.

TEMPLIMITONE=35
TEMPLIMITTWO=40
TEMPLIMITTHREE=44


References

Related devices

Pages in category "LS-CHL"

This category contains only the following page.