Category:LS-CHLv2 - Revision history

Threecoloursred: /* Installing Debian Linux */ rephrasing

Threecoloursred — Thu, 19 Jan 2012 14:01:13 GMT

Installing Debian Linux: rephrasing

← Older revision		Revision as of 14:01, 19 January 2012
Line 145:		Line 145:

	===Installing Debian Linux===		===Installing Debian Linux===
-		+	It's possible to install Debian on the device successfully:
-	[[Debian Lenny on LS-CHLv2\|~~Here~~]]~~'s how to install~~ Debian ~~Lenny~~ (Debian 5.0) ~~on the device.~~	+	* Debian Lenny (Debian 5.0) [[Debian Lenny on LS-CHLv2\|instructions]].
-	[[Debian Squeeze on LS-CHLv2\|~~Here~~]]~~'s how to install~~ Debian ~~Squeeze~~ (Debian 6.0) ~~on the device.~~	+	* Debian Squeeze (Debian 6.0) [[Debian Squeeze on LS-CHLv2\|instructions]].
-	It may be possible to install ~~Wheezy on the device~~ using relatively minor variations on the Squeeze instructions.	+	* Debian Wheezy (Debian 7.0): It may be possible to install this using relatively minor variations on the Squeeze instructions.

	===How to get Telnet access?===		===How to get Telnet access?===

Threecoloursred: /* Installing Debian */ Changed section from installing Debian Lenny to installing Debian (Lenny, Squeeze...)

Threecoloursred — Thu, 19 Jan 2012 13:58:26 GMT

Installing Debian: Changed section from installing Debian Lenny to installing Debian (Lenny, Squeeze...)

← Older revision		Revision as of 13:58, 19 January 2012
Line 144:		Line 144:
	The initrd is not an absolute system requirement. Providing an empty ''initrd.buffalo'' cause the system to boot straight with /dev/sda2 as the root filesystem. This is the key to start a different GNU/Linux system from the stock one. Note that "empty initrd" does not mean an empty file: rather, it means an initrd which contains and empty filesystem. [http://www.cyrius.com/debian/orion/buffalo/kuroboxpro/recovery.html] shows how to create one.		The initrd is not an absolute system requirement. Providing an empty ''initrd.buffalo'' cause the system to boot straight with /dev/sda2 as the root filesystem. This is the key to start a different GNU/Linux system from the stock one. Note that "empty initrd" does not mean an empty file: rather, it means an initrd which contains and empty filesystem. [http://www.cyrius.com/debian/orion/buffalo/kuroboxpro/recovery.html] shows how to create one.

-	===Installing Debian ~~Lenny~~===	+	===Installing Debian Linux===

-	[[Debian Lenny on LS-CHLv2\|~~This page~~]] ~~documents~~ how to install Debian Lenny on the LS-CHLv2.	+	[[Debian Lenny on LS-CHLv2\|Here]]'s how to install Debian Lenny (Debian 5.0) on the device.
		+	[[Debian Squeeze on LS-CHLv2\|Here]]'s how to install Debian Squeeze (Debian 6.0) on the device.
		+	It may be possible to install Wheezy on the device using relatively minor variations on the Squeeze instructions.

	===How to get Telnet access?===		===How to get Telnet access?===

Threecoloursred: + YouTube video link taking apart device

Threecoloursred — Sun, 15 Jan 2012 19:09:55 GMT

+ YouTube video link taking apart device

← Older revision		Revision as of 19:09, 15 January 2012
Line 76:		Line 76:
	\|-		\|-
	!\| Serial		!\| Serial
-	\|\|<del>http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html</del> - this link refers to a different Linkstation thus crossed out. [http://forum.buffalo.nas-central.org/viewtopic.php?f=71&t=21501 Forum posts] suggest the details are incorrect for the LS-CHLv2, instead noting that it is closely related to the [http://buffalo.nas-central.org/wiki/Category:LS-XHL LS-XHL], this [http://buffalo.nas-central.org/wiki/Serial_and_JTAG_port_LS-XHL link] looks more likely - and the resistors etc mentioned do exist on the LS-CHLv2.	+	\|\|<del>http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html</del> - this link refers to a different Linkstation thus crossed out. [http://forum.buffalo.nas-central.org/viewtopic.php?f=71&t=21501 Forum posts] suggest the details are incorrect for the LS-CHLv2, instead noting that it is closely related to the [http://buffalo.nas-central.org/wiki/Category:LS-XHL LS-XHL], this [http://buffalo.nas-central.org/wiki/Serial_and_JTAG_port_LS-XHL link] looks more likely - and the resistors etc mentioned do exist on the LS-CHLv2. There's a YouTube video [http://www.youtube.com/watch?v=me96S89aJQE here] showing it being taken apart (skip to 2 minutes in before it gets going).
	\|-		\|-
	!\| Hardware Hacks		!\| Hardware Hacks

Threecoloursred: syntax corrected to fix a couple of broken links

Threecoloursred — Thu, 12 Jan 2012 13:55:41 GMT

syntax corrected to fix a couple of broken links

← Older revision		Revision as of 13:55, 12 January 2012
Line 76:		Line 76:
	\|-		\|-
	!\| Serial		!\| Serial
-	\|\|<del>http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html</del> - this link refers to a different Linkstation thus crossed out. [http://forum.buffalo.nas-central.org/viewtopic.php?f=71&t=21501: Forum posts] suggest the details are incorrect for the LS-CHLv2, instead noting that it is closely related to the [http://buffalo.nas-central.org/wiki/Category:LS-XHL: LS-XHL], this [http://buffalo.nas-central.org/wiki/Serial_and_JTAG_port_LS-XHL: link] looks more likely - and the resistors etc mentioned do exist on the LS-CHLv2.	+	\|\|<del>http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html</del> - this link refers to a different Linkstation thus crossed out. [http://forum.buffalo.nas-central.org/viewtopic.php?f=71&t=21501 Forum posts] suggest the details are incorrect for the LS-CHLv2, instead noting that it is closely related to the [http://buffalo.nas-central.org/wiki/Category:LS-XHL LS-XHL], this [http://buffalo.nas-central.org/wiki/Serial_and_JTAG_port_LS-XHL link] looks more likely - and the resistors etc mentioned do exist on the LS-CHLv2.
	\|-		\|-
	!\| Hardware Hacks		!\| Hardware Hacks

Threecoloursred at 22:22, 8 January 2012

Threecoloursred — Sun, 08 Jan 2012 22:22:31 GMT

← Older revision		Revision as of 22:22, 8 January 2012
Line 76:		Line 76:
	\|-		\|-
	!\| Serial		!\| Serial
-	\|\|<del>http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html</del> - this link refers to a different Linkstation thus crossed out. [http://forum.buffalo.nas-central.org/viewtopic.php?f=71&t=21501: Forum posts] suggest the details are incorrect for the LS-CHLv2, instead noting that it is closely related to the LS-XHL, [http://buffalo.nas-central.org/wiki/Serial_and_JTAG_port_LS-XHL: ~~this~~ link] looks more likely - and the resistors etc mentioned do exist on the LS-CHLv2.	+	\|\|<del>http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html</del> - this link refers to a different Linkstation thus crossed out. [http://forum.buffalo.nas-central.org/viewtopic.php?f=71&t=21501: Forum posts] suggest the details are incorrect for the LS-CHLv2, instead noting that it is closely related to the [http://buffalo.nas-central.org/wiki/Category:LS-XHL: LS-XHL], this [http://buffalo.nas-central.org/wiki/Serial_and_JTAG_port_LS-XHL: link] looks more likely - and the resistors etc mentioned do exist on the LS-CHLv2.
	\|-		\|-
	!\| Hardware Hacks		!\| Hardware Hacks

Threecoloursred: Added link re. serial port

Threecoloursred — Sun, 08 Jan 2012 22:18:36 GMT

Added link re. serial port

← Older revision		Revision as of 22:18, 8 January 2012
Line 76:		Line 76:
	\|-		\|-
	!\| Serial		!\| Serial
-	\|\|<del>http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html</del> - this link refers to a different Linkstation thus crossed out. Forum posts suggest the details are incorrect for the LS-CHLv2	+	\|\|<del>http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html</del> - this link refers to a different Linkstation thus crossed out. [http://forum.buffalo.nas-central.org/viewtopic.php?f=71&t=21501: Forum posts] suggest the details are incorrect for the LS-CHLv2, instead noting that it is closely related to the LS-XHL, [http://buffalo.nas-central.org/wiki/Serial_and_JTAG_port_LS-XHL: this link] looks more likely - and the resistors etc mentioned do exist on the LS-CHLv2.
	\|-		\|-
	!\| Hardware Hacks		!\| Hardware Hacks

Threecoloursred at 23:42, 6 January 2012

Threecoloursred — Fri, 06 Jan 2012 23:42:06 GMT

← Older revision		Revision as of 23:42, 6 January 2012
Line 76:		Line 76:
	\|-		\|-
	!\| Serial		!\| Serial
-	\|\|<del>http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html</del> - this link refers to a different Linkstation thus crossed out. Forum posts suggest ~~this method doesn't work~~ for the LS-CHLv2	+	\|\|<del>http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html</del> - this link refers to a different Linkstation thus crossed out. Forum posts suggest the details are incorrect for the LS-CHLv2
	\|-		\|-
	!\| Hardware Hacks		!\| Hardware Hacks

Threecoloursred: Instructions for connecting the serial port are wrong (different device) so crossed them out

Threecoloursred — Fri, 06 Jan 2012 23:41:11 GMT

Instructions for connecting the serial port are wrong (different device) so crossed them out

← Older revision		Revision as of 23:41, 6 January 2012
Line 76:		Line 76:
	\|-		\|-
	!\| Serial		!\| Serial
-	\|\|http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html	+	\|\|<del>http://www.yamasita.jp/linkstation/2008/11/081115__serial_console_1.html</del> - this link refers to a different Linkstation thus crossed out. Forum posts suggest this method doesn't work for the LS-CHLv2
	\|-		\|-
	!\| Hardware Hacks		!\| Hardware Hacks

Inad at 10:05, 19 September 2011

Inad — Mon, 19 Sep 2011 10:05:30 GMT

← Older revision		Revision as of 10:05, 19 September 2011
Line 156:		Line 156:
	===Setting up a scanner server===		===Setting up a scanner server===

-	[[Setting up a scanner server]]	+	[[Setting up a scanner server\|This page]] walks you through the setting up of the SANE daemon [http://penguin-breeder.org/sane/saned/ saned] on your linkstation. This allows you to plugin a scanner to your linkstation via the USB port and make that scanner available over the network.

Inad: /* How to get Telnet access? */

Inad — Sun, 18 Sep 2011 23:27:22 GMT

How to get Telnet access?

← Older revision		Revision as of 23:27, 18 September 2011
Line 153:		Line 153:

	If the firmware version is older than 1.34, the process is different with LS-XHL. You need to use the acp_commander to copy the "telnetd" to /usr/local/sbin from older firmware, such as 1.10 and then follow the XHL guide.		If the firmware version is older than 1.34, the process is different with LS-XHL. You need to use the acp_commander to copy the "telnetd" to /usr/local/sbin from older firmware, such as 1.10 and then follow the XHL guide.
		+
		+	===Setting up a scanner server===
		+
		+	[[Setting up a scanner server]]