Difference between revisions of "Category:LS-WSGL/R1"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Supplemented System highlights)
Line 10: Line 10:
 
|-valign="top"
 
|-valign="top"
 
|align="right" |  '''CPU'''
 
|align="right" |  '''CPU'''
|ARM 266.24 BogoMIPS ARM926EJ-Sid(wb) rev 0 (v5l)
+
|ARM 266.24 BogoMIPS ARM926EJ-Sid(wb) rev 0 (v5l) ([http://www.marvell.com/products/media/index.jsp 88F5182 Marvell SoC])
 
|-valign="top"
 
|-valign="top"
 
|align="right" | '''RAM'''
 
|align="right" | '''RAM'''
Line 16: Line 16:
 
|-valign="top"
 
|-valign="top"
 
|align="right" | '''Flash ROM'''
 
|align="right" | '''Flash ROM'''
|
+
|SST39VF020 4Mb - 256kB x8 (NOR)
 
|-valign="top"
 
|-valign="top"
 
|align="right" | '''Other'''
 
|align="right" | '''Other'''
 +
|RTC - Ricoh RS5C372A (I2C)
 
|  
 
|  
 
|- valign="top"
 
|- valign="top"

Revision as of 11:07, 19 August 2008

Link.png This article is currently a stub. You can help this Wiki by expanding it

. This template will categorize articles that include it into Category:Stubs.

Linkstation Mini
Linkstation Mini Front
Linkstation Mini Back
Ethernet Disk mini
CPU ARM 266.24 BogoMIPS ARM926EJ-Sid(wb) rev 0 (v5l) (88F5182 Marvell SoC)
RAM 128MiB DDR2-533 - 2 modules a 32MBx16 - Elpida EDE5116AFSE-5C-E
Flash ROM SST39VF020 4Mb - 256kB x8 (NOR)
Other RTC - Ricoh RS5C372A (I2C)
NIC MARVELL 88E1118 Gigabit Ethernet Transceiver ("Alaska" series) RJ-45
USB 1x Type A
internal HDD 2x SATA 2,5"
IDE/SATA Controller
Drive Capacity 2x250GB or 2x500GB (Hitachi Travelstar 5K500 500GB SATA II HTS545050KTA300)
Fan none
initial Networkname LS-WSGL1AC

Hi-res pictures of the board (approx. 3500x2000 px): frontside backside

Login:

BUFFALO INC. LinkStation series
LS-WSGLBA4 login: root

cat /proc/cpuinfo

Processor       : ARM926EJ-Sid(wb) rev 0 (v5l)
BogoMIPS        : 266.24
Features        : swp half thumb fastmult edsp java
CPU implementer : 0x41
CPU architecture: 5TEJ
CPU variant     : 0x0
CPU part        : 0x926
CPU revision    : 0
Cache type      : write-back
Cache clean     : cp15 c7 ops
Cache lockdown  : format C
Cache format    : Harvard
I size          : 32768
I assoc         : 1
I line length   : 32
I sets          : 1024
D size          : 32768
D assoc         : 1
D line length   : 32
D sets          : 1024
Hardware        : MV-88fxx81
Revision        : 0000
Serial          : 0000000000000000

cat /proc/meminfo

MemTotal:       126236 kB
MemFree:         62112 kB
Buffers:           100 kB
Cached:          38176 kB
SwapCached:          0 kB
Active:          33444 kB
Inactive:        19396 kB
HighTotal:           0 kB
HighFree:            0 kB
LowTotal:       126236 kB
LowFree:         62112 kB
SwapTotal:     1003896 kB
SwapFree:      1003896 kB
Dirty:              36 kB
Writeback:           0 kB
Mapped:          21212 kB
Slab:             7928 kB
CommitLimit:   1067012 kB
Committed_AS:   172968 kB
PageTables:        696 kB
VmallocTotal:   385024 kB
VmallocUsed:      1040 kB
VmallocChunk:   383984 kB

lsmod

Module                  Size  Used by
appletalk              38544  0
psnap                   4516  1 appletalk
llc                     8372  1 psnap
usblp                  14784  0
usb_storage            59975  0
ehci_marvell_hcd       33480  0
usbcore               127240  4 usblp,usb_storage,ehci_marvell_hcd

cat /proc/buffalo/firmware

SERIES=LinkStation
PRODUCTNAME=LS-WSGL/R1(SUJIN)
VERSION=0.16
SUBVERSION=FLASH 0.00
PRODUCTID=0x00003002
BUILDDATE=2008/03/12 11:17:32
BOOTVER=1.13

mount

rootfs on / type rootfs (rw)
/dev/root on / type xfs (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw)
/dev/ram1 on /mnt/ram type tmpfs (rw)
/dev/md0 on /boot type ext3 (rw,data=ordered)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/md2 on /mnt/array1 type xfs (rw,noatime,sunit=128,swidth=256)

uname -r

2.6.16.16-arm1

cat /proc/cmdline

console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 func=0 BOOT
VER=1.13

cat /proc/mtd

dev:    size   erasesize  name
mtd0: 00040000 00001000 "phys_mapped_flash"

Partitions:

root@LS-WSGLBA4:/proc# cat partitions
major minor  #blocks  name

   8     0  488386584 sda
   8     1    1004031 sda1
   8     2    5004247 sda2
   8     4          1 sda4
   8     5    1004031 sda5
   8     6  480480021 sda6
   8    16  488386584 sdb
   8    17    1004031 sdb1
   8    18    5004247 sdb2
   8    20          1 sdb4
   8    21    1004031 sdb5
   8    22  480480021 sdb6
  31     0        256 mtdblock0
   9     0    1003904 md0
   9    10    1003904 md10
   9     1    5004160 md1
   9     2  960959872 md2

ls /proc

1              1516           5941           buffalo        misc
1046           1566           600            bus            modules
1049           1567           601            cmdline        mounts
11             168            6012           cpu            mtd
1172           169            6017           cpuinfo        net
1173           1703           6018           crypto         partitions
1263           192            6674           devices        resource_dump
1303           2              6726           diskstats      scsi
1310           3              6770           dma_copy       self
1311           327            6774           driver         slabinfo
1312           38             6790           execdomains    stat
1319           39             6796           filesystems    swaps
1333           4              6812           fs             sys
1358           40             6824           interrupts     sysvipc
1367           41             6850           iomem          tty
1370           42             7918           ioports        uptime
1486           43             847            kallsyms       version
1487           44             8947           kmsg           vmstat
1499           45             909            loadavg        zoneinfo
1507           491            9655           locks
1510           494            9656           mdstat
1514           5              buddyinfo      meminfo

cat /proc/buffalo/enet

MAC=00:1D:73:4C:XX:XX
link=100Mbps
duplex=full
jumboframe=enable
mtu=1500
regster9 value=0x0300
mode.config=auto:slave
mode.actual=master
=== for debug ===


page=0 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
       0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
       0x6060 0x6c08 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
       0x0000 0x0000 0x0040 0x0000 0x0000 0x0000 0x0000 0x0000

page=1 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
       0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0001 0x0000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

page=2 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
       0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
       0x0288 0x0000 0x0000 0x0008 0x0000 0x1070 0x0002 0x0000
       0x4705 0x0044 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

page=3 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
       0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
       0x0201 0x4401 0x4105 0x0073 0x0000 0x0000 0x0003 0x0000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

page=4 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
       0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0004 0x0000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

page=5 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
       0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
       0x80ff 0xa0ff 0x80ff 0x89ff 0x0000 0x2000 0x0005 0x0603
       0x0000 0x0104 0x0f12 0x0a0c 0x0006 0x0000 0x0000 0x0000

page=6 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
       0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0006 0x0000
       0x0000 0x0000 0x0010 0x0000 0x0000 0x0000 0x0000 0x0000

page=7 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
       0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0007 0x0000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

page=8 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
       0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0008 0x0000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

page=9 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
       0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0009 0x0000
       0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000

dmesg

r: 4, 65536 bytes)
Memory: 128MB 0MB 0MB 0MB = 128MB total
Memory: 110620KB available (2992K code, 553K data, 112K init)
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 15360K
NET: Registered protocol family 16
FLASH boardId = 19
Flash bankwidth 1, base ff800000, size 40000
BUFFALO LS_WSGL_R1 FLASH size 256[KB]

  Marvell Development Board (LSP Version 1.7.8_NAS)-- BUFFALO_BOARD_LS_WSGL_R1

Detected Tclk 166664740 and SysClk 200000000
Marvell USB EHCI Host controller #0: c16f5e00
Marvell USB EHCI Host controller #1: c16f5c00
pexBarOverlapDetect: winNum 2 overlap current 0
mvPexInit:Warning :Bar 2 size is illigal
it will be disabled
please check Pex and CPU windows configuration
PCI: bus0: Fast back to back transfers enabled
PCI: bus1: Fast back to back transfers enabled
SCSI subsystem initialized
use IDMA acceleration in copy to/from user buffers. used channels 2 and 3
Done.
cesadev_init(c0011c44)
Fast Floating Point Emulator V0.9 (c) Peter Teichmann.
SGI XFS with large block numbers, no debug enabled
Initializing Cryptographic API
io scheduler noop registered (default)
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0x0 (irq = 4) is a 16550A
RAMDISK driver initialized: 3 RAM disks of 16384K size 1024 blocksize
loop: loaded (max 8 devices)
Marvell Gigabit Ethernet Driver 'egiga':
  o Ethernet descriptors in DRAM
  o DRAM SW cache-coherency
  o Checksum offload enabled
  o Loading network interface ** egiga_init_module (0)
'eth0'
Intergrated Sata device found
scsi0 : Marvell SCSI to SATA adapter
scsi1 : Marvell SCSI to SATA adapter
** BUFFALO Disable Command Queuing Function [0 0] **
** BUFFALO Disable Command Queuing Function [0 1] **
  Vendor: Hitachi   Model: HTS545050KTA300   Rev: BKFO
  Type:   Direct-Access                      ANSI SCSI revision: 03
  Vendor: Hitachi   Model: HTS545050KTA300   Rev: BKFO
  Type:   Direct-Access                      ANSI SCSI revision: 03
Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = c1422ba0
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
sda: Write Protect is off
sda: Mode Sense: 23 00 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2 sda4 < sda5 sda6 >
sd 0:0:0:0: Attached scsi disk sda
Linux IAL (ERROR) : retry command host=1, bus=1 SCpnt = c1422ba0
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
SCSI device sdb: drive cache: write back
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
sdb: Write Protect is off
sdb: Mode Sense: 23 00 00 00
SCSI device sdb: drive cache: write back
sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 >
sd 1:0:0:0: Attached scsi disk sdb
sd 0:0:0:0: Attached scsi generic sg0 type 0
sd 1:0:0:0: Attached scsi generic sg1 type 0
physmap flash device: 40000 at ff800000
CFI: Found no phys_mapped_flash device at location zero
>jedec_probe
Found: SST 39LF020
phys_mapped_flash: Found 1 x8 devices at 0x0 in 8-bit bank
number of JEDEC chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
cmdlinepart partition parsing not available
RedBoot partition parsing not available
mice: PS/2 mouse device common for all mice
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
Kernel event proc (C) BUFFALO INC. V.1.00 installed.
MICON ctrl (C) BUFFALO INC. V.1.00 installed.
mvGppValueSet: Err. An attempt to set output value to GPP 15 in input mode.
Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed.
mvGppValueSet: Err. An attempt to set output value to GPP 2 in input mode.
Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.0.02 installed.
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
md: md10 stopped.
md: md1 stopped.
md: md0 stopped.
md: bind<sdb1>
md: bind<sda1>
raid1: raid set md0 active with 2 out of 2 mirrors
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
md: md10 stopped.
md: bind<sdb5>
md: bind<sda5>
raid1: raid set md10 active with 2 out of 2 mirrors
md: md1 stopped.
md: bind<sdb2>
md: bind<sda2>
raid1: raid set md1 active with 2 out of 2 mirrors
XFS mounting filesystem md1
Ending clean XFS mount for filesystem: md1
XFS mounting filesystem md1
Ending clean XFS mount for filesystem: md1
VFS: Mounted root (xfs filesystem).
Trying to move old root to /initrd ... okay
Freeing init memory: 112K
Adding 1003896k swap on /dev/md10.  Priority:-1 extents:1 across:1003896k
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
usbcore: registered new driver usbfs
usbcore: registered new driver hub
ehci_platform ehci_platform.4523: EHCI Platform Host Controller
ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1
ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000
ehci_platform ehci_platform.4523: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ehci_platform ehci_platform.16781: EHCI Platform Host Controller
ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2
ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000
ehci_platform ehci_platform.16781: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver usblp
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
eth0: link down
eth0: link up<5>, full duplex<5>, speed 1 Gbps<5>
md: md2 stopped.
md: bind<sdb6>
md: bind<sda6>
md2: setting max_sectors to 128, segment boundary to 32767
raid0: looking at sda6
raid0:   comparing sda6(480479936) with sda6(480479936)
raid0:   END
raid0:   ==> UNIQUE
raid0: 1 zones
raid0: looking at sdb6
raid0:   comparing sdb6(480479936) with sda6(480479936)
raid0:   EQUAL
raid0: FINAL 1 zones
raid0: done.
raid0 : md_size is 960959872 blocks.
raid0 : conf->hash_spacing is 960959872 blocks.
raid0 : nb_zone is 1.
raid0 : Allocating 4 bytes for hash.
XFS mounting filesystem md2
Ending clean XFS mount for filesystem: md2
BuffaloSwPollingCheck> SW_POWER_ON
NET: Registered protocol family 5
eth0: change mtu 1500 (buffer-size 1520) to 9676 (buffer-size 9696)
eth0: link down
eth0: link up<5>, full duplex<5>, speed 1 Gbps<5>

df

Filesystem           1k-blocks      Used Available Use% Mounted on
/dev/md1               4993920    255660   4738260   5% /
/dev/ram1                15360       112     15248   1% /mnt/ram
/dev/md0                988088    116632    871456  12% /boot
/dev/md2             480348864      3268 480345596   0% /mnt/array1

mount

rootfs on / type rootfs (rw)
/dev/root on / type xfs (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw)
/dev/ram1 on /mnt/ram type tmpfs (rw)
/dev/md0 on /boot type ext3 (rw,data=ordered)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/md2 on /mnt/array1 type xfs (rw,noatime)

smartctl -a /dev/sda (same for second drive)

smartctl version 5.37 [armv5tejl-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
Home page is http://smartmontools.sourceforge.net/

=== START OF INFORMATION SECTION ===
Device Model:     Hitachi HTS545050KTA300
Serial Number:    080227BK0F00VEG0H--A
Firmware Version: BKFOC60M
User Capacity:    500,107,862,016 bytes
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   8
ATA Standard is:  Not recognized. Minor revision code: 0x42
Local Time is:    Fri Jul 25 23:42:28 2008 JST
SMART support is: Available - device has SMART capability.
SMART support is: Disabled

SMART Disabled. Use option -s with argument 'on' to enable it.

smartctl -A /dev/sda (sync in progress, note temperature)

=== START OF READ SMART DATA SECTION ===
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x000b   100   100   062    Pre-fail  Always       -       0
  2 Throughput_Performance  0x0005   100   100   040    Pre-fail  Offline      -       0
  3 Spin_Up_Time            0x0007   236   236   033    Pre-fail  Always       -       1
  4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       14
  5 Reallocated_Sector_Ct   0x0033   100   100   005    Pre-fail  Always       -       0
  7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  8 Seek_Time_Performance   0x0005   100   100   040    Pre-fail  Offline      -       0
  9 Power_On_Hours          0x0012   100   100   000    Old_age   Always       -       1
 10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       14
191 G-Sense_Error_Rate      0x000a   100   100   000    Old_age   Always       -       0
192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       12
193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       143
194 Temperature_Celsius     0x0002   096   096   000    Old_age   Always       -       57 (Lifetime Min/Max 25/57)
196 Reallocated_Event_Count 0x0032   100   100   000    Old_age   Always       -       0
197 Current_Pending_Sector  0x0022   100   100   000    Old_age   Always       -       0
198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       0
199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
223 Load_Retry_Count        0x000a   100   100   000    Old_age   Always       -       0