Difference between revisions of "Category:LS-WSGL/R1"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
m
m
Line 89: Line 89:
 
Hi-res pictures of the board (approx. 3500x2000 px):  
 
Hi-res pictures of the board (approx. 3500x2000 px):  
 
[http://pics.livejournal.com/alexkbs/pic/001r3k0w.jpg frontside] [http://pics.livejournal.com/alexkbs/pic/001r4ata.jpg backside]
 
[http://pics.livejournal.com/alexkbs/pic/001r3k0w.jpg frontside] [http://pics.livejournal.com/alexkbs/pic/001r4ata.jpg backside]
 
Login:
 
BUFFALO INC. LinkStation series
 
LS-WSGLBA4 login: root
 
 
cat /proc/cpuinfo
 
Processor      : ARM926EJ-Sid(wb) rev 0 (v5l)
 
BogoMIPS        : 266.24
 
Features        : swp half thumb fastmult edsp java
 
CPU implementer : 0x41
 
CPU architecture: 5TEJ
 
CPU variant    : 0x0
 
CPU part        : 0x926
 
CPU revision    : 0
 
Cache type      : write-back
 
Cache clean    : cp15 c7 ops
 
Cache lockdown  : format C
 
Cache format    : Harvard
 
I size          : 32768
 
I assoc        : 1
 
I line length  : 32
 
I sets          : 1024
 
D size          : 32768
 
D assoc        : 1
 
D line length  : 32
 
D sets          : 1024
 
Hardware        : MV-88fxx81
 
Revision        : 0000
 
Serial          : 0000000000000000
 
 
cat /proc/meminfo
 
MemTotal:      126236 kB
 
MemFree:        62112 kB
 
Buffers:          100 kB
 
Cached:          38176 kB
 
SwapCached:          0 kB
 
Active:          33444 kB
 
Inactive:        19396 kB
 
HighTotal:          0 kB
 
HighFree:            0 kB
 
LowTotal:      126236 kB
 
LowFree:        62112 kB
 
SwapTotal:    1003896 kB
 
SwapFree:      1003896 kB
 
Dirty:              36 kB
 
Writeback:          0 kB
 
Mapped:          21212 kB
 
Slab:            7928 kB
 
CommitLimit:  1067012 kB
 
Committed_AS:  172968 kB
 
PageTables:        696 kB
 
VmallocTotal:  385024 kB
 
VmallocUsed:      1040 kB
 
VmallocChunk:  383984 kB
 
 
lsmod
 
Module                  Size  Used by
 
appletalk              38544  0
 
psnap                  4516  1 appletalk
 
llc                    8372  1 psnap
 
usblp                  14784  0
 
usb_storage            59975  0
 
ehci_marvell_hcd      33480  0
 
usbcore              127240  4 usblp,usb_storage,ehci_marvell_hcd
 
 
cat /proc/buffalo/firmware
 
SERIES=LinkStation
 
PRODUCTNAME=LS-WSGL/R1(SUJIN)
 
VERSION=0.16
 
SUBVERSION=FLASH 0.00
 
PRODUCTID=0x00003002
 
BUILDDATE=2008/03/12 11:17:32
 
BOOTVER=1.13
 
 
mount
 
rootfs on / type rootfs (rw)
 
/dev/root on / type xfs (rw)
 
proc on /proc type proc (rw)
 
sysfs on /sys type sysfs (rw)
 
devpts on /dev/pts type devpts (rw)
 
/dev/ram1 on /mnt/ram type tmpfs (rw)
 
/dev/md0 on /boot type ext3 (rw,data=ordered)
 
usbfs on /proc/bus/usb type usbfs (rw)
 
/dev/md2 on /mnt/array1 type xfs (rw,noatime,sunit=128,swidth=256)
 
 
uname -r
 
2.6.16.16-arm1
 
 
cat /proc/cmdline
 
console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 func=0 BOOT
 
VER=1.13
 
 
cat /proc/mtd
 
dev:    size  erasesize  name
 
mtd0: 00040000 00001000 "phys_mapped_flash"
 
 
Partitions:
 
root@LS-WSGLBA4:/proc# cat partitions
 
major minor  #blocks  name
 
 
    8    0  488386584 sda
 
    8    1    1004031 sda1
 
    8    2    5004247 sda2
 
    8    4          1 sda4
 
    8    5    1004031 sda5
 
    8    6  480480021 sda6
 
    8    16  488386584 sdb
 
    8    17    1004031 sdb1
 
    8    18    5004247 sdb2
 
    8    20          1 sdb4
 
    8    21    1004031 sdb5
 
    8    22  480480021 sdb6
 
  31    0        256 mtdblock0
 
    9    0    1003904 md0
 
    9    10    1003904 md10
 
    9    1    5004160 md1
 
    9    2  960959872 md2
 
 
ls /proc
 
1              1516          5941          buffalo        misc
 
1046          1566          600            bus            modules
 
1049          1567          601            cmdline        mounts
 
11            168            6012          cpu            mtd
 
1172          169            6017          cpuinfo        net
 
1173          1703          6018          crypto        partitions
 
1263          192            6674          devices        resource_dump
 
1303          2              6726          diskstats      scsi
 
1310          3              6770          dma_copy      self
 
1311          327            6774          driver        slabinfo
 
1312          38            6790          execdomains    stat
 
1319          39            6796          filesystems    swaps
 
1333          4              6812          fs            sys
 
1358          40            6824          interrupts    sysvipc
 
1367          41            6850          iomem          tty
 
1370          42            7918          ioports        uptime
 
1486          43            847            kallsyms      version
 
1487          44            8947          kmsg          vmstat
 
1499          45            909            loadavg        zoneinfo
 
1507          491            9655          locks
 
1510          494            9656          mdstat
 
1514          5              buddyinfo      meminfo
 
 
cat /proc/buffalo/enet
 
MAC=00:1D:73:4C:XX:XX
 
link=100Mbps
 
duplex=full
 
jumboframe=enable
 
mtu=1500
 
regster9 value=0x0300
 
mode.config=auto:slave
 
mode.actual=master
 
=== for debug ===
 
 
 
page=0 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
 
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
 
        0x6060 0x6c08 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
 
        0x0000 0x0000 0x0040 0x0000 0x0000 0x0000 0x0000 0x0000
 
 
page=1 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
 
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0001 0x0000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
 
 
page=2 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
 
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
 
        0x0288 0x0000 0x0000 0x0008 0x0000 0x1070 0x0002 0x0000
 
        0x4705 0x0044 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
 
 
page=3 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
 
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
 
        0x0201 0x4401 0x4105 0x0073 0x0000 0x0000 0x0003 0x0000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
 
 
page=4 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
 
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0004 0x0000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
 
 
page=5 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
 
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
 
        0x80ff 0xa0ff 0x80ff 0x89ff 0x0000 0x2000 0x0005 0x0603
 
        0x0000 0x0104 0x0f12 0x0a0c 0x0006 0x0000 0x0000 0x0000
 
 
page=6 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
 
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0006 0x0000
 
        0x0000 0x0000 0x0010 0x0000 0x0000 0x0000 0x0000 0x0000
 
 
page=7 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
 
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0007 0x0000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
 
 
page=8 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
 
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0008 0x0000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
 
 
page=9 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
 
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0009 0x0000
 
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
 
 
dmesg
 
r: 4, 65536 bytes)
 
Memory: 128MB 0MB 0MB 0MB = 128MB total
 
Memory: 110620KB available (2992K code, 553K data, 112K init)
 
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
 
Mount-cache hash table entries: 512
 
CPU: Testing write buffer coherency: ok
 
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
 
Freeing initrd memory: 15360K
 
NET: Registered protocol family 16
 
FLASH boardId = 19
 
Flash bankwidth 1, base ff800000, size 40000
 
BUFFALO LS_WSGL_R1 FLASH size 256[KB]
 
 
  Marvell Development Board (LSP Version 1.7.8_NAS)-- BUFFALO_BOARD_LS_WSGL_R1
 
 
Detected Tclk 166664740 and SysClk 200000000
 
Marvell USB EHCI Host controller #0: c16f5e00
 
Marvell USB EHCI Host controller #1: c16f5c00
 
pexBarOverlapDetect: winNum 2 overlap current 0
 
mvPexInit:Warning :Bar 2 size is illigal
 
it will be disabled
 
please check Pex and CPU windows configuration
 
PCI: bus0: Fast back to back transfers enabled
 
PCI: bus1: Fast back to back transfers enabled
 
SCSI subsystem initialized
 
use IDMA acceleration in copy to/from user buffers. used channels 2 and 3
 
Done.
 
cesadev_init(c0011c44)
 
Fast Floating Point Emulator V0.9 (c) Peter Teichmann.
 
SGI XFS with large block numbers, no debug enabled
 
Initializing Cryptographic API
 
io scheduler noop registered (default)
 
io scheduler anticipatory registered
 
io scheduler deadline registered
 
io scheduler cfq registered
 
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
 
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
 
serial8250: ttyS1 at MMIO 0x0 (irq = 4) is a 16550A
 
RAMDISK driver initialized: 3 RAM disks of 16384K size 1024 blocksize
 
loop: loaded (max 8 devices)
 
Marvell Gigabit Ethernet Driver 'egiga':
 
  o Ethernet descriptors in DRAM
 
  o DRAM SW cache-coherency
 
  o Checksum offload enabled
 
  o Loading network interface ** egiga_init_module (0)
 
'eth0'
 
Intergrated Sata device found
 
scsi0 : Marvell SCSI to SATA adapter
 
scsi1 : Marvell SCSI to SATA adapter
 
** BUFFALO Disable Command Queuing Function [0 0] **
 
** BUFFALO Disable Command Queuing Function [0 1] **
 
  Vendor: Hitachi  Model: HTS545050KTA300  Rev: BKFO
 
  Type:  Direct-Access                      ANSI SCSI revision: 03
 
  Vendor: Hitachi  Model: HTS545050KTA300  Rev: BKFO
 
  Type:  Direct-Access                      ANSI SCSI revision: 03
 
Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = c1422ba0
 
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
 
sda: Write Protect is off
 
sda: Mode Sense: 23 00 00 00
 
SCSI device sda: drive cache: write back
 
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
 
sda: Write Protect is off
 
sda: Mode Sense: 23 00 00 00
 
SCSI device sda: drive cache: write back
 
sda: sda1 sda2 sda4 < sda5 sda6 >
 
sd 0:0:0:0: Attached scsi disk sda
 
Linux IAL (ERROR) : retry command host=1, bus=1 SCpnt = c1422ba0
 
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
 
sdb: Write Protect is off
 
sdb: Mode Sense: 23 00 00 00
 
SCSI device sdb: drive cache: write back
 
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
 
sdb: Write Protect is off
 
sdb: Mode Sense: 23 00 00 00
 
SCSI device sdb: drive cache: write back
 
sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 >
 
sd 1:0:0:0: Attached scsi disk sdb
 
sd 0:0:0:0: Attached scsi generic sg0 type 0
 
sd 1:0:0:0: Attached scsi generic sg1 type 0
 
physmap flash device: 40000 at ff800000
 
CFI: Found no phys_mapped_flash device at location zero
 
>jedec_probe
 
Found: SST 39LF020
 
phys_mapped_flash: Found 1 x8 devices at 0x0 in 8-bit bank
 
number of JEDEC chips: 1
 
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
 
cmdlinepart partition parsing not available
 
RedBoot partition parsing not available
 
mice: PS/2 mouse device common for all mice
 
md: raid0 personality registered for level 0
 
md: raid1 personality registered for level 1
 
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
 
md: bitmap version 4.39
 
Kernel event proc (C) BUFFALO INC. V.1.00 installed.
 
MICON ctrl (C) BUFFALO INC. V.1.00 installed.
 
mvGppValueSet: Err. An attempt to set output value to GPP 15 in input mode.
 
Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed.
 
mvGppValueSet: Err. An attempt to set output value to GPP 2 in input mode.
 
Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.0.02 installed.
 
NET: Registered protocol family 2
 
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
 
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
 
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
 
TCP: Hash tables configured (established 8192 bind 8192)
 
TCP reno registered
 
TCP bic registered
 
NET: Registered protocol family 1
 
NET: Registered protocol family 17
 
md: Autodetecting RAID arrays.
 
md: autorun ...
 
md: ... autorun DONE.
 
RAMDISK: Compressed image found at block 0
 
VFS: Mounted root (ext2 filesystem).
 
md: md10 stopped.
 
md: md1 stopped.
 
md: md0 stopped.
 
md: bind<sdb1>
 
md: bind<sda1>
 
raid1: raid set md0 active with 2 out of 2 mirrors
 
kjournald starting.  Commit interval 5 seconds
 
EXT3 FS on md0, internal journal
 
EXT3-fs: mounted filesystem with ordered data mode.
 
md: md10 stopped.
 
md: bind<sdb5>
 
md: bind<sda5>
 
raid1: raid set md10 active with 2 out of 2 mirrors
 
md: md1 stopped.
 
md: bind<sdb2>
 
md: bind<sda2>
 
raid1: raid set md1 active with 2 out of 2 mirrors
 
XFS mounting filesystem md1
 
Ending clean XFS mount for filesystem: md1
 
XFS mounting filesystem md1
 
Ending clean XFS mount for filesystem: md1
 
VFS: Mounted root (xfs filesystem).
 
Trying to move old root to /initrd ... okay
 
Freeing init memory: 112K
 
Adding 1003896k swap on /dev/md10.  Priority:-1 extents:1 across:1003896k
 
kjournald starting.  Commit interval 5 seconds
 
EXT3 FS on md0, internal journal
 
EXT3-fs: mounted filesystem with ordered data mode.
 
usbcore: registered new driver usbfs
 
usbcore: registered new driver hub
 
ehci_platform ehci_platform.4523: EHCI Platform Host Controller
 
ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1
 
ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000
 
ehci_platform ehci_platform.4523: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
 
usb usb1: configuration #1 chosen from 1 choice
 
hub 1-0:1.0: USB hub found
 
hub 1-0:1.0: 1 port detected
 
ehci_platform ehci_platform.16781: EHCI Platform Host Controller
 
ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2
 
ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000
 
ehci_platform ehci_platform.16781: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
 
usb usb2: configuration #1 chosen from 1 choice
 
hub 2-0:1.0: USB hub found
 
hub 2-0:1.0: 1 port detected
 
Initializing USB Mass Storage driver...
 
usbcore: registered new driver usb-storage
 
USB Mass Storage support registered.
 
usbcore: registered new driver usblp
 
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
 
eth0: link down
 
eth0: link up<5>, full duplex<5>, speed 1 Gbps<5>
 
md: md2 stopped.
 
md: bind<sdb6>
 
md: bind<sda6>
 
md2: setting max_sectors to 128, segment boundary to 32767
 
raid0: looking at sda6
 
raid0:  comparing sda6(480479936) with sda6(480479936)
 
raid0:  END
 
raid0:  ==> UNIQUE
 
raid0: 1 zones
 
raid0: looking at sdb6
 
raid0:  comparing sdb6(480479936) with sda6(480479936)
 
raid0:  EQUAL
 
raid0: FINAL 1 zones
 
raid0: done.
 
raid0 : md_size is 960959872 blocks.
 
raid0 : conf->hash_spacing is 960959872 blocks.
 
raid0 : nb_zone is 1.
 
raid0 : Allocating 4 bytes for hash.
 
XFS mounting filesystem md2
 
Ending clean XFS mount for filesystem: md2
 
BuffaloSwPollingCheck> SW_POWER_ON
 
NET: Registered protocol family 5
 
eth0: change mtu 1500 (buffer-size 1520) to 9676 (buffer-size 9696)
 
eth0: link down
 
eth0: link up<5>, full duplex<5>, speed 1 Gbps<5>
 
 
df                 
 
Filesystem          1k-blocks      Used Available Use% Mounted on
 
/dev/md1              4993920    255660  4738260  5% /
 
/dev/ram1                15360      112    15248  1% /mnt/ram
 
/dev/md0                988088    116632    871456  12% /boot
 
/dev/md2            480348864      3268 480345596  0% /mnt/array1
 
 
mount
 
rootfs on / type rootfs (rw)
 
/dev/root on / type xfs (rw)
 
proc on /proc type proc (rw)
 
sysfs on /sys type sysfs (rw)
 
devpts on /dev/pts type devpts (rw)
 
/dev/ram1 on /mnt/ram type tmpfs (rw)
 
/dev/md0 on /boot type ext3 (rw,data=ordered)
 
usbfs on /proc/bus/usb type usbfs (rw)
 
/dev/md2 on /mnt/array1 type xfs (rw,noatime)
 
 
smartctl -a /dev/sda (same for second drive)
 
smartctl version 5.37 [armv5tejl-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
 
Home page is http://smartmontools.sourceforge.net/
 
 
=== START OF INFORMATION SECTION ===
 
Device Model:    Hitachi HTS545050KTA300
 
Serial Number:    080227BK0F00VEG0H--A
 
Firmware Version: BKFOC60M
 
User Capacity:    500,107,862,016 bytes
 
Device is:        Not in smartctl database [for details use: -P showall]
 
ATA Version is:  8
 
ATA Standard is:  Not recognized. Minor revision code: 0x42
 
Local Time is:    Fri Jul 25 23:42:28 2008 JST
 
SMART support is: Available - device has SMART capability.
 
SMART support is: Disabled
 
 
SMART Disabled. Use option -s with argument 'on' to enable it.
 
 
smartctl -A /dev/sda (sync in progress, note temperature)
 
 
=== START OF READ SMART DATA SECTION ===
 
SMART Attributes Data Structure revision number: 16
 
Vendor Specific SMART Attributes with Thresholds:
 
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
 
  1 Raw_Read_Error_Rate    0x000b  100  100  062    Pre-fail  Always      -      0
 
  2 Throughput_Performance  0x0005  100  100  040    Pre-fail  Offline      -      0
 
  3 Spin_Up_Time            0x0007  236  236  033    Pre-fail  Always      -      1
 
  4 Start_Stop_Count        0x0012  100  100  000    Old_age  Always      -      14
 
  5 Reallocated_Sector_Ct  0x0033  100  100  005    Pre-fail  Always      -      0
 
  7 Seek_Error_Rate        0x000b  100  100  067    Pre-fail  Always      -      0
 
  8 Seek_Time_Performance  0x0005  100  100  040    Pre-fail  Offline      -      0
 
  9 Power_On_Hours          0x0012  100  100  000    Old_age  Always      -      1
 
  10 Spin_Retry_Count        0x0013  100  100  060    Pre-fail  Always      -      0
 
  12 Power_Cycle_Count      0x0032  100  100  000    Old_age  Always      -      14
 
191 G-Sense_Error_Rate      0x000a  100  100  000    Old_age  Always      -      0
 
192 Power-Off_Retract_Count 0x0032  100  100  000    Old_age  Always      -      12
 
193 Load_Cycle_Count        0x0012  100  100  000    Old_age  Always      -      143
 
194 Temperature_Celsius    0x0002  096  096  000    Old_age  Always      -      57 (Lifetime Min/Max 25/57)
 
196 Reallocated_Event_Count 0x0032  100  100  000    Old_age  Always      -      0
 
197 Current_Pending_Sector  0x0022  100  100  000    Old_age  Always      -      0
 
198 Offline_Uncorrectable  0x0008  100  100  000    Old_age  Offline      -      0
 
199 UDMA_CRC_Error_Count    0x000a  200  200  000    Old_age  Always      -      0
 
223 Load_Retry_Count        0x000a  100  100  000    Old_age  Always      -      0
 

Revision as of 01:16, 8 September 2008

Link.png This article is currently a stub. You can help this Wiki by expanding it

. This template will categorize articles that include it into Category:Stubs.

Linkstation Mini
Linkstation Mini Front
Linkstation Mini Back
Ethernet Disk mini
CPU ARM 266.24 BogoMIPS ARM926EJ-Sid(wb) rev 0 (v5l) (88F5182 Marvell SoC)
RAM 128MiB DDR2-533 - 2 modules a 32MBx16 - Elpida EDE5116AFSE-5C-E
Flash ROM SST39VF020 4Mb - 256kB x8 (NOR)
Other RTC - Ricoh RS5C372A (I2C)
NIC MARVELL 88E1118 Gigabit Ethernet Transceiver ("Alaska" series) RJ-45
USB 1x Type A
internal HDD 2x SATA 2,5"
IDE/SATA Controller
Drive Capacity 2x250GB or 2x500GB (Hitachi Travelstar 5K500 500GB SATA II HTS545050KTA300)
Fan none
initial Networkname LS-WSGL1AC
SOFTWARE
Toolchains
Opened Firmwares
  • Telnet enabled firmware
  • Distributions
Development Tools
GPL Kernel
HARDWARE
Disassembly

http://www.yamasita.jp/linkstation/2008/08/080830_linkstation_mini_lsws500glr1_d.html

Serial Add a Serial port to the LS MINI
Hardware Hacks
Other LS Mini: Serial Port Output - Boot-Log

Pictures of the board

LS MINI PCB frontside - high resolution
LS MINI PCB backside - high resolution

Hi-res pictures of the board (approx. 3500x2000 px): frontside backside