Difference between revisions of "Category:LS-WSGL/R1"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(added df, mount and smartctl outputs)
 
(10 intermediate revisions by 3 users not shown)
Line 1: Line 1:
{{stubs}}
 
 
[[Image:LS_WSGL.jpg|thumb|right|Linkstation Mini]]
 
[[Image:LS_WSGL.jpg|thumb|right|Linkstation Mini]]
 
[[Image:LS_WSGL_front.jpg|thumb|right|Linkstation Mini Front]]
 
[[Image:LS_WSGL_front.jpg|thumb|right|Linkstation Mini Front]]
Line 9: Line 8:
 
| '''Ethernet Disk mini'''
 
| '''Ethernet Disk mini'''
 
|-valign="top"
 
|-valign="top"
|align="right" |  '''CPU'''
+
|align="right" |  '''CPU'''  
|ARM 266.24 BogoMIPS ARM926EJ-Sid(wb) rev 0 (v5l)
+
|ARM 266.24 BogoMIPS ARM926EJ-Sid(wb) rev 0 (v5l) ([http://www.marvell.com/products/media/index.jsp 88F5182-A2 C400 - 400MHz ARM Processor Marvell SoC])
 
|-valign="top"
 
|-valign="top"
 
|align="right" | '''RAM'''
 
|align="right" | '''RAM'''
|128MiB DDR2-533 - 2 modules a 32MBx16 - Elpida EDE5116AFSE-5C-E
+
|128MiB DDR2-533 - 2 modules a 32MBx16 - either
 +
* Elpida EDE5116AFSE-5C-E
 +
* NANYA NT5TU32M16AG-3C
 
|-valign="top"
 
|-valign="top"
 
|align="right" | '''Flash ROM'''
 
|align="right" | '''Flash ROM'''
|
+
|NANIYARA SST39VF020 4Mb - 256kB x8 (NOR)
 
|-valign="top"
 
|-valign="top"
 
|align="right" | '''Other'''
 
|align="right" | '''Other'''
 +
|RTC - Ricoh RS5C372A (I2C)
 
|  
 
|  
 
|- valign="top"
 
|- valign="top"
 
|align="right" | '''NIC'''
 
|align="right" | '''NIC'''
| RJ-45 1000MBit/s
+
| MARVELL 88E1118 Gigabit Ethernet Transceiver ("Alaska" series) RJ-45
 
|-valign="top"
 
|-valign="top"
 
|align="right" | '''USB'''
 
|align="right" | '''USB'''
Line 31: Line 33:
 
|- valign="top"
 
|- valign="top"
 
|align="right" | '''IDE/SATA Controller'''
 
|align="right" | '''IDE/SATA Controller'''
|  
+
| On the SOC
 
|-valign="top"
 
|-valign="top"
 
| align="right" |'''Drive Capacity'''
 
| align="right" |'''Drive Capacity'''
| 2x250GB or 2x500GB (Hitachi Travelstar 5K500 500GB SATA II HTS545050KTA300)
+
| 2x250GB or 2x500GB (Hitachi Travelstar 5K500 500GB SATA II HTS545050KTA300 / Western Digital (Scorpio Blue) WD5000BEVT )
 
|-valign="top"
 
|-valign="top"
 
| align="right" |'''Fan'''
 
| align="right" |'''Fan'''
Line 43: Line 45:
 
|}
 
|}
  
Login:
+
{| class=wikitable
BUFFALO INC. LinkStation series
+
||
LS-WSGLBA4 login: root
+
|| '''SOFTWARE'''
 +
|-
 +
!|Toolchains
 +
||
 +
|-
 +
!|Opened Firmwares
 +
||
 +
*Telnet enabled firmware
  
cat /proc/cpuinfo
+
*Distributions
Processor      : ARM926EJ-Sid(wb) rev 0 (v5l)
+
BogoMIPS        : 266.24
+
Features        : swp half thumb fastmult edsp java
+
CPU implementer : 0x41
+
CPU architecture: 5TEJ
+
CPU variant    : 0x0
+
CPU part        : 0x926
+
CPU revision    : 0
+
Cache type      : write-back
+
Cache clean    : cp15 c7 ops
+
Cache lockdown  : format C
+
Cache format    : Harvard
+
I size          : 32768
+
I assoc        : 1
+
I line length  : 32
+
I sets          : 1024
+
D size          : 32768
+
D assoc        : 1
+
D line length  : 32
+
D sets          : 1024
+
Hardware        : MV-88fxx81
+
Revision        : 0000
+
Serial          : 0000000000000000
+
  
cat /proc/meminfo
+
|-
MemTotal:      126236 kB
+
!|Development Tools
MemFree:        62112 kB
+
||
Buffers:          100 kB
+
|-
Cached:          38176 kB
+
!|GPL Kernel
SwapCached:         0 kB
+
|| [http://buffalo.nas-central.org/forums/viewtopic.php?t=11631 kernel patch against orion.git]
Active:          33444 kB
+
|-
Inactive:        19396 kB
+
||
HighTotal:          0 kB
+
|| '''HARDWARE'''
HighFree:            0 kB
+
|-
LowTotal:      126236 kB
+
!| Disassembly
LowFree:        62112 kB
+
||[[Disassemble the LS MINI]]
SwapTotal:    1003896 kB
+
|-
SwapFree:      1003896 kB
+
!| Serial
Dirty:              36 kB
+
|| [[Add a Serial port to the LS MINI]]
Writeback:          0 kB
+
|-
Mapped:          21212 kB
+
!| Hardware Hacks
Slab:            7928 kB
+
||
CommitLimit:  1067012 kB
+
|-
Committed_AS:  172968 kB
+
!| Other
PageTables:        696 kB
+
|| [[ LS Mini: Serial Port Output - Boot-Log]]
VmallocTotal:  385024 kB
+
|}
VmallocUsed:      1040 kB
+
VmallocChunk:  383984 kB
+
 
+
lsmod
+
Module                  Size  Used by
+
appletalk              38544  0
+
psnap                  4516  1 appletalk
+
llc                    8372  1 psnap
+
usblp                  14784  0
+
usb_storage            59975  0
+
ehci_marvell_hcd      33480  0
+
usbcore              127240  4 usblp,usb_storage,ehci_marvell_hcd
+
 
+
cat /proc/buffalo/firmware
+
SERIES=LinkStation
+
PRODUCTNAME=LS-WSGL/R1(SUJIN)
+
VERSION=0.16
+
SUBVERSION=FLASH 0.00
+
PRODUCTID=0x00003002
+
BUILDDATE=2008/03/12 11:17:32
+
BOOTVER=1.13
+
 
+
mount
+
rootfs on / type rootfs (rw)
+
/dev/root on / type xfs (rw)
+
proc on /proc type proc (rw)
+
sysfs on /sys type sysfs (rw)
+
devpts on /dev/pts type devpts (rw)
+
/dev/ram1 on /mnt/ram type tmpfs (rw)
+
/dev/md0 on /boot type ext3 (rw,data=ordered)
+
usbfs on /proc/bus/usb type usbfs (rw)
+
/dev/md2 on /mnt/array1 type xfs (rw,noatime,sunit=128,swidth=256)
+
 
+
uname -r
+
2.6.16.16-arm1
+
 
+
cat /proc/cmdline
+
console=ttyS0,115200 root=/dev/sda2 rw initrd=0x00800040,15M panic=5 func=0 BOOT
+
VER=1.13
+
 
+
cat /proc/mtd
+
dev:    size  erasesize  name
+
mtd0: 00040000 00001000 "phys_mapped_flash"
+
 
+
Partitions:
+
root@LS-WSGLBA4:/proc# cat partitions
+
major minor  #blocks  name
+
+
    8    0  488386584 sda
+
    8    1    1004031 sda1
+
    8    2    5004247 sda2
+
    8    4          1 sda4
+
    8    5    1004031 sda5
+
    8    6  480480021 sda6
+
    8    16  488386584 sdb
+
    8    17    1004031 sdb1
+
    8    18    5004247 sdb2
+
    8    20          1 sdb4
+
    8    21    1004031 sdb5
+
    8    22  480480021 sdb6
+
  31    0        256 mtdblock0
+
    9    0    1003904 md0
+
    9    10    1003904 md10
+
    9    1    5004160 md1
+
    9    2  960959872 md2
+
 
+
ls /proc
+
1              1516          5941          buffalo        misc
+
1046          1566          600            bus            modules
+
1049          1567          601            cmdline        mounts
+
11            168            6012          cpu            mtd
+
1172          169            6017          cpuinfo        net
+
1173          1703          6018          crypto        partitions
+
1263          192            6674          devices        resource_dump
+
1303          2              6726          diskstats      scsi
+
1310          3              6770          dma_copy      self
+
1311          327            6774          driver        slabinfo
+
1312          38            6790          execdomains    stat
+
1319          39            6796          filesystems    swaps
+
1333          4              6812          fs            sys
+
1358          40            6824          interrupts    sysvipc
+
1367          41            6850          iomem          tty
+
1370          42            7918          ioports        uptime
+
1486          43            847            kallsyms      version
+
1487          44            8947          kmsg          vmstat
+
1499          45            909            loadavg        zoneinfo
+
1507          491            9655          locks
+
1510          494            9656          mdstat
+
1514          5              buddyinfo      meminfo
+
 
+
cat /proc/buffalo/enet
+
MAC=00:1D:73:4C:XX:XX
+
link=100Mbps
+
duplex=full
+
jumboframe=enable
+
mtu=1500
+
regster9 value=0x0300
+
mode.config=auto:slave
+
mode.actual=master
+
=== for debug ===
+
+
+
page=0 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
+
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
+
        0x6060 0x6c08 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+
        0x0000 0x0000 0x0040 0x0000 0x0000 0x0000 0x0000 0x0000
+
+
page=1 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
+
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0001 0x0000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+
+
page=2 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
+
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
+
        0x0288 0x0000 0x0000 0x0008 0x0000 0x1070 0x0002 0x0000
+
        0x4705 0x0044 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+
+
page=3 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
+
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
+
        0x0201 0x4401 0x4105 0x0073 0x0000 0x0000 0x0003 0x0000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+
+
page=4 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
+
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0004 0x0000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+
+
page=5 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
+
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
+
        0x80ff 0xa0ff 0x80ff 0x89ff 0x0000 0x2000 0x0005 0x0603
+
        0x0000 0x0104 0x0f12 0x0a0c 0x0006 0x0000 0x0000 0x0000
+
+
page=6 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
+
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0006 0x0000
+
        0x0000 0x0000 0x0010 0x0000 0x0000 0x0000 0x0000 0x0000
+
+
page=7 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
+
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0007 0x0000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+
+
page=8 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
+
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0008 0x0000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+
+
page=9 0x1140 0x796d 0x0141 0x0e11 0x01e1 0x45e1 0x0005 0x2801
+
        0x0000 0x0300 0x4000 0x0000 0x0000 0x0000 0x0000 0x3000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0009 0x0000
+
        0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000 0x0000
+
 
+
dmesg
+
r: 4, 65536 bytes)
+
Memory: 128MB 0MB 0MB 0MB = 128MB total
+
Memory: 110620KB available (2992K code, 553K data, 112K init)
+
Calibrating delay loop... 266.24 BogoMIPS (lpj=1331200)
+
Mount-cache hash table entries: 512
+
CPU: Testing write buffer coherency: ok
+
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
+
Freeing initrd memory: 15360K
+
NET: Registered protocol family 16
+
FLASH boardId = 19
+
Flash bankwidth 1, base ff800000, size 40000
+
BUFFALO LS_WSGL_R1 FLASH size 256[KB]
+
+
  Marvell Development Board (LSP Version 1.7.8_NAS)-- BUFFALO_BOARD_LS_WSGL_R1
+
+
Detected Tclk 166664740 and SysClk 200000000
+
Marvell USB EHCI Host controller #0: c16f5e00
+
Marvell USB EHCI Host controller #1: c16f5c00
+
pexBarOverlapDetect: winNum 2 overlap current 0
+
mvPexInit:Warning :Bar 2 size is illigal
+
it will be disabled
+
please check Pex and CPU windows configuration
+
PCI: bus0: Fast back to back transfers enabled
+
PCI: bus1: Fast back to back transfers enabled
+
SCSI subsystem initialized
+
use IDMA acceleration in copy to/from user buffers. used channels 2 and 3
+
Done.
+
cesadev_init(c0011c44)
+
Fast Floating Point Emulator V0.9 (c) Peter Teichmann.
+
SGI XFS with large block numbers, no debug enabled
+
Initializing Cryptographic API
+
io scheduler noop registered (default)
+
io scheduler anticipatory registered
+
io scheduler deadline registered
+
io scheduler cfq registered
+
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
+
serial8250: ttyS0 at MMIO 0x0 (irq = 3) is a 16550A
+
serial8250: ttyS1 at MMIO 0x0 (irq = 4) is a 16550A
+
RAMDISK driver initialized: 3 RAM disks of 16384K size 1024 blocksize
+
loop: loaded (max 8 devices)
+
Marvell Gigabit Ethernet Driver 'egiga':
+
  o Ethernet descriptors in DRAM
+
  o DRAM SW cache-coherency
+
  o Checksum offload enabled
+
  o Loading network interface ** egiga_init_module (0)
+
'eth0'
+
Intergrated Sata device found
+
scsi0 : Marvell SCSI to SATA adapter
+
scsi1 : Marvell SCSI to SATA adapter
+
** BUFFALO Disable Command Queuing Function [0 0] **
+
** BUFFALO Disable Command Queuing Function [0 1] **
+
  Vendor: Hitachi  Model: HTS545050KTA300  Rev: BKFO
+
  Type:  Direct-Access                      ANSI SCSI revision: 03
+
  Vendor: Hitachi  Model: HTS545050KTA300  Rev: BKFO
+
  Type:  Direct-Access                      ANSI SCSI revision: 03
+
Linux IAL (ERROR) : retry command host=0, bus=0 SCpnt = c1422ba0
+
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
+
sda: Write Protect is off
+
sda: Mode Sense: 23 00 00 00
+
SCSI device sda: drive cache: write back
+
SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
+
sda: Write Protect is off
+
sda: Mode Sense: 23 00 00 00
+
SCSI device sda: drive cache: write back
+
sda: sda1 sda2 sda4 < sda5 sda6 >
+
sd 0:0:0:0: Attached scsi disk sda
+
Linux IAL (ERROR) : retry command host=1, bus=1 SCpnt = c1422ba0
+
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
+
sdb: Write Protect is off
+
sdb: Mode Sense: 23 00 00 00
+
SCSI device sdb: drive cache: write back
+
SCSI device sdb: 976773168 512-byte hdwr sectors (500108 MB)
+
sdb: Write Protect is off
+
sdb: Mode Sense: 23 00 00 00
+
SCSI device sdb: drive cache: write back
+
sdb: sdb1 sdb2 sdb4 < sdb5 sdb6 >
+
sd 1:0:0:0: Attached scsi disk sdb
+
sd 0:0:0:0: Attached scsi generic sg0 type 0
+
sd 1:0:0:0: Attached scsi generic sg1 type 0
+
physmap flash device: 40000 at ff800000
+
CFI: Found no phys_mapped_flash device at location zero
+
>jedec_probe
+
Found: SST 39LF020
+
phys_mapped_flash: Found 1 x8 devices at 0x0 in 8-bit bank
+
number of JEDEC chips: 1
+
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
+
cmdlinepart partition parsing not available
+
RedBoot partition parsing not available
+
mice: PS/2 mouse device common for all mice
+
md: raid0 personality registered for level 0
+
md: raid1 personality registered for level 1
+
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
+
md: bitmap version 4.39
+
Kernel event proc (C) BUFFALO INC. V.1.00 installed.
+
MICON ctrl (C) BUFFALO INC. V.1.00 installed.
+
mvGppValueSet: Err. An attempt to set output value to GPP 15 in input mode.
+
Buffalo CPU Inerupts Driver (C) BUFFALO INC. Ver.0.01 alpha1 installed.
+
mvGppValueSet: Err. An attempt to set output value to GPP 2 in input mode.
+
Buffalo Gpio Control Driver (C) BUFFALO INC. Ver.0.02 installed.
+
NET: Registered protocol family 2
+
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
+
TCP established hash table entries: 8192 (order: 3, 32768 bytes)
+
TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
+
TCP: Hash tables configured (established 8192 bind 8192)
+
TCP reno registered
+
TCP bic registered
+
NET: Registered protocol family 1
+
NET: Registered protocol family 17
+
md: Autodetecting RAID arrays.
+
md: autorun ...
+
md: ... autorun DONE.
+
RAMDISK: Compressed image found at block 0
+
VFS: Mounted root (ext2 filesystem).
+
md: md10 stopped.
+
md: md1 stopped.
+
md: md0 stopped.
+
md: bind<sdb1>
+
md: bind<sda1>
+
raid1: raid set md0 active with 2 out of 2 mirrors
+
kjournald starting.  Commit interval 5 seconds
+
EXT3 FS on md0, internal journal
+
EXT3-fs: mounted filesystem with ordered data mode.
+
md: md10 stopped.
+
md: bind<sdb5>
+
md: bind<sda5>
+
raid1: raid set md10 active with 2 out of 2 mirrors
+
md: md1 stopped.
+
md: bind<sdb2>
+
md: bind<sda2>
+
raid1: raid set md1 active with 2 out of 2 mirrors
+
XFS mounting filesystem md1
+
Ending clean XFS mount for filesystem: md1
+
XFS mounting filesystem md1
+
Ending clean XFS mount for filesystem: md1
+
VFS: Mounted root (xfs filesystem).
+
Trying to move old root to /initrd ... okay
+
Freeing init memory: 112K
+
Adding 1003896k swap on /dev/md10.  Priority:-1 extents:1 across:1003896k
+
kjournald starting.  Commit interval 5 seconds
+
EXT3 FS on md0, internal journal
+
EXT3-fs: mounted filesystem with ordered data mode.
+
usbcore: registered new driver usbfs
+
usbcore: registered new driver hub
+
ehci_platform ehci_platform.4523: EHCI Platform Host Controller
+
ehci_platform ehci_platform.4523: new USB bus registered, assigned bus number 1
+
ehci_platform ehci_platform.4523: irq 17, io mem 0x00000000
+
ehci_platform ehci_platform.4523: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
+
usb usb1: configuration #1 chosen from 1 choice
+
hub 1-0:1.0: USB hub found
+
hub 1-0:1.0: 1 port detected
+
ehci_platform ehci_platform.16781: EHCI Platform Host Controller
+
ehci_platform ehci_platform.16781: new USB bus registered, assigned bus number 2
+
ehci_platform ehci_platform.16781: irq 12, io mem 0x00000000
+
ehci_platform ehci_platform.16781: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
+
usb usb2: configuration #1 chosen from 1 choice
+
hub 2-0:1.0: USB hub found
+
hub 2-0:1.0: 1 port detected
+
Initializing USB Mass Storage driver...
+
usbcore: registered new driver usb-storage
+
USB Mass Storage support registered.
+
usbcore: registered new driver usblp
+
drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
+
eth0: link down
+
eth0: link up<5>, full duplex<5>, speed 1 Gbps<5>
+
md: md2 stopped.
+
md: bind<sdb6>
+
md: bind<sda6>
+
md2: setting max_sectors to 128, segment boundary to 32767
+
raid0: looking at sda6
+
raid0:  comparing sda6(480479936) with sda6(480479936)
+
raid0:  END
+
raid0:  ==> UNIQUE
+
raid0: 1 zones
+
raid0: looking at sdb6
+
raid0:  comparing sdb6(480479936) with sda6(480479936)
+
raid0:  EQUAL
+
raid0: FINAL 1 zones
+
raid0: done.
+
raid0 : md_size is 960959872 blocks.
+
raid0 : conf->hash_spacing is 960959872 blocks.
+
raid0 : nb_zone is 1.
+
raid0 : Allocating 4 bytes for hash.
+
XFS mounting filesystem md2
+
Ending clean XFS mount for filesystem: md2
+
BuffaloSwPollingCheck> SW_POWER_ON
+
NET: Registered protocol family 5
+
eth0: change mtu 1500 (buffer-size 1520) to 9676 (buffer-size 9696)
+
eth0: link down
+
eth0: link up<5>, full duplex<5>, speed 1 Gbps<5>
+
 
+
df                 
+
Filesystem          1k-blocks      Used Available Use% Mounted on
+
/dev/md1              4993920    255660  4738260  5% /
+
/dev/ram1                15360      112    15248  1% /mnt/ram
+
/dev/md0                988088    116632    871456  12% /boot
+
/dev/md2            480348864      3268 480345596  0% /mnt/array1
+
 
+
mount
+
rootfs on / type rootfs (rw)
+
/dev/root on / type xfs (rw)
+
proc on /proc type proc (rw)
+
sysfs on /sys type sysfs (rw)
+
devpts on /dev/pts type devpts (rw)
+
/dev/ram1 on /mnt/ram type tmpfs (rw)
+
/dev/md0 on /boot type ext3 (rw,data=ordered)
+
usbfs on /proc/bus/usb type usbfs (rw)
+
/dev/md2 on /mnt/array1 type xfs (rw,noatime)
+
 
+
smartctl -a /dev/sda (same for second drive)
+
smartctl version 5.37 [armv5tejl-unknown-linux-gnu] Copyright (C) 2002-6 Bruce Allen
+
Home page is http://smartmontools.sourceforge.net/
+
+
=== START OF INFORMATION SECTION ===
+
Device Model:    Hitachi HTS545050KTA300
+
Serial Number:    080227BK0F00VEG0H--A
+
Firmware Version: BKFOC60M
+
User Capacity:    500,107,862,016 bytes
+
Device is:        Not in smartctl database [for details use: -P showall]
+
ATA Version is:  8
+
ATA Standard is:  Not recognized. Minor revision code: 0x42
+
Local Time is:    Fri Jul 25 23:42:28 2008 JST
+
SMART support is: Available - device has SMART capability.
+
SMART support is: Disabled
+
+
SMART Disabled. Use option -s with argument 'on' to enable it.
+
 
+
smartctl -A /dev/sda (sync in progress, note temperature)
+
  
=== START OF READ SMART DATA SECTION ===
+
=== Pictures of the board ===
SMART Attributes Data Structure revision number: 16
+
[[Image:LSMINI_PCB_front.jpg|left|thumb|LS MINI PCB frontside - high resolution]] [[Image:LSMINI_PCB_back.jpg|left|thumb|LS MINI PCB backside - high resolution]]
Vendor Specific SMART Attributes with Thresholds:
+
ID# ATTRIBUTE_NAME          FLAG    VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
+
  1 Raw_Read_Error_Rate    0x000b  100  100  062    Pre-fail  Always      -      0
+
  2 Throughput_Performance  0x0005  100  100  040    Pre-fail  Offline      -      0
+
  3 Spin_Up_Time            0x0007  236  236  033    Pre-fail  Always      -      1
+
  4 Start_Stop_Count        0x0012  100  100  000    Old_age  Always      -      14
+
  5 Reallocated_Sector_Ct  0x0033  100  100  005    Pre-fail  Always      -      0
+
  7 Seek_Error_Rate        0x000b  100  100  067    Pre-fail  Always      -      0
+
  8 Seek_Time_Performance  0x0005  100  100  040    Pre-fail  Offline      -      0
+
  9 Power_On_Hours          0x0012  100  100  000    Old_age  Always      -      1
+
  10 Spin_Retry_Count        0x0013  100  100  060    Pre-fail  Always      -      0
+
  12 Power_Cycle_Count      0x0032  100  100  000    Old_age  Always      -      14
+
191 G-Sense_Error_Rate      0x000a  100  100  000    Old_age  Always      -      0
+
192 Power-Off_Retract_Count 0x0032  100  100  000    Old_age  Always      -      12
+
193 Load_Cycle_Count        0x0012  100  100  000    Old_age  Always      -      143
+
194 Temperature_Celsius    0x0002  096  096  000    Old_age  Always      -      57 (Lifetime Min/Max 25/57)
+
196 Reallocated_Event_Count 0x0032  100  100  000    Old_age  Always      -      0
+
197 Current_Pending_Sector  0x0022  100  100  000    Old_age  Always      -      0
+
198 Offline_Uncorrectable  0x0008  100  100  000    Old_age  Offline      -      0
+
199 UDMA_CRC_Error_Count    0x000a  200  200  000    Old_age  Always      -      0
+
223 Load_Retry_Count        0x000a  100  100  000    Old_age  Always      -       0
+

Latest revision as of 15:58, 27 November 2009

Linkstation Mini
Linkstation Mini Front
Linkstation Mini Back
Ethernet Disk mini
CPU ARM 266.24 BogoMIPS ARM926EJ-Sid(wb) rev 0 (v5l) (88F5182-A2 C400 - 400MHz ARM Processor Marvell SoC)
RAM 128MiB DDR2-533 - 2 modules a 32MBx16 - either
  • Elpida EDE5116AFSE-5C-E
  • NANYA NT5TU32M16AG-3C
Flash ROM NANIYARA SST39VF020 4Mb - 256kB x8 (NOR)
Other RTC - Ricoh RS5C372A (I2C)
NIC MARVELL 88E1118 Gigabit Ethernet Transceiver ("Alaska" series) RJ-45
USB 1x Type A
internal HDD 2x SATA 2,5"
IDE/SATA Controller On the SOC
Drive Capacity 2x250GB or 2x500GB (Hitachi Travelstar 5K500 500GB SATA II HTS545050KTA300 / Western Digital (Scorpio Blue) WD5000BEVT )
Fan none
initial Networkname LS-WSGL1AC
SOFTWARE
Toolchains
Opened Firmwares
  • Telnet enabled firmware
  • Distributions
Development Tools
GPL Kernel kernel patch against orion.git
HARDWARE
Disassembly Disassemble the LS MINI
Serial Add a Serial port to the LS MINI
Hardware Hacks
Other LS Mini: Serial Port Output - Boot-Log

Pictures of the board

LS MINI PCB frontside - high resolution
LS MINI PCB backside - high resolution