Difference between revisions of "Category:LS-WTGL/R1"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
m (Pictures of the board)
(configuration notes)
(2 intermediate revisions by one user not shown)
Line 15: Line 15:
 
!|Opened Firmwares
 
!|Opened Firmwares
 
||
 
||
*Telnet enabled firmware
+
*[[Open Stock Firmware|Telnet enabled firmware]]
  
 
*Distributions
 
*Distributions
Line 42: Line 42:
 
|| [[LS DUO: Serial Port Output - Boot-Log]]
 
|| [[LS DUO: Serial Port Output - Boot-Log]]
 
|}
 
|}
 +
 +
== Configuration Notes ==
 +
* The '''name''' of the RAID array is "RAID Array 1", but the factory default RAID configuration is '''RAID 0'''.  If you prefer RAID 1 or just two independent disks, don't create Shares yet.  Update the RAID configuration from "Disk Management -> RAID Setup -> RAID Array 1" in the Web interface.
 +
* Avoid disconnecting a USB drive without unmounting or powering down first.
 +
** You might find yourself with a Share that cannot be deleted from the Web interface, as described in [http://forums.buffalotech.com/t5/Storage/Can-t-delete-shared-folder-on-my-Link-Station-Live/m-p/6028#M5204 this thread].  The only way to fix this seems to be by rebuilding the partition table through a [http://forums.buffalotech.com/t5/Storage/FAQ-2-of-3-Force-Firmware-update-procedure-please-read-this/m-p/11011#M9309 forced factory firmware update].  Your [[Open Stock Firmware|bootstrapping]] work and Shares will be lost.
 +
 +
== Forum ==
 +
[http://forum.buffalo.nas-central.org/viewforum.php?f=50 LS Pro Duo forum]
  
 
=== Pictures of the board ===
 
=== Pictures of the board ===

Revision as of 22:11, 5 February 2010

LS-WTGL-R1.jpg
LS-WTGL/R1 ARM9 (LSPRODUO)
CPU Marvell 88F5182-A2 (400MHz) (ARM926EJ-S)
RAM 64MB
Flash ROM
Other
NIC
USB
SATA Controller Marvell SCSI to SATA adapter
Drive Capacity 465.7 GB (SAMSUNG HD501LJ)
Hardware Overview Information/LSPRO-DUO-Overview
SOFTWARE
Toolchains
Opened Firmwares
  • Distributions
Development Tools
GPL Kernel Now available
HARDWARE
Disassembly
Serial Add a Serial port to the LS DUO
Hardware Hacks
Other LS DUO: Serial Port Output - Boot-Log

Configuration Notes

  • The name of the RAID array is "RAID Array 1", but the factory default RAID configuration is RAID 0. If you prefer RAID 1 or just two independent disks, don't create Shares yet. Update the RAID configuration from "Disk Management -> RAID Setup -> RAID Array 1" in the Web interface.
  • Avoid disconnecting a USB drive without unmounting or powering down first.
    • You might find yourself with a Share that cannot be deleted from the Web interface, as described in this thread. The only way to fix this seems to be by rebuilding the partition table through a forced factory firmware update. Your bootstrapping work and Shares will be lost.

Forum

LS Pro Duo forum

Pictures of the board

LS Pro DUO PCB frontside - high resolution
LS Pro DUO PCB backside - high resolution
LS Pro DUO PCB frontside with comments
LS Pro DUO PCB backside with comments

Pages in category "LS-WTGL/R1"

The following 4 pages are in this category, out of 4 total.