From NAS-Central Buffalo - The Linkstation Wiki
|
| LS-WTGL/R1 ARM9 (LSPRODUO)
|
| CPU
| Marvell 88F5182-A2 (400MHz) (ARM926EJ-S)
|
| RAM
| 64MB
|
| Flash ROM
|
|
| Other
|
|
| NIC
|
|
| USB
|
|
| SATA Controller
| Marvell SCSI to SATA adapter
|
| Drive Capacity
| 465.7 GB (SAMSUNG HD501LJ)
|
| Hardware Overview
| Information/LSPRO-DUO-Overview
|
Configuration Notes
- The name of the RAID array is "RAID Array 1", but the factory default RAID configuration is RAID 0. If you prefer RAID 1 or just two independent disks, don't create Shares yet. Update the RAID configuration from "Disk Management -> RAID Setup -> RAID Array 1" in the Web interface.
- Avoid disconnecting a USB drive without unmounting or powering down first.
- You might find yourself with a Share that cannot be deleted from the Web interface, as described in this thread. The only way to fix this seems to be by rebuilding the partition table through a forced factory firmware update. Your bootstrapping work and Shares will be lost.
Forum
LS Pro Duo forum
Pictures of the board
 LS Pro DUO PCB frontside - high resolution  LS Pro DUO PCB backside - high resolution |
 LS Pro DUO PCB frontside with comments  LS Pro DUO PCB backside with comments |
Pages in category "LS-WTGL/R1"
The following 4 pages are in this category, out of 4 total.
A
C
L
U
