Difference between revisions of "Category:LS-WVL"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
m
(Optware & IPKG Install Guide)
Line 103: Line 103:
 
After that just run `ipkg update` and you can then install packages with `ipkg install package`
 
After that just run `ipkg update` and you can then install packages with `ipkg install package`
 
You can view list of installed packages with `ipkg list_installed`  
 
You can view list of installed packages with `ipkg list_installed`  
 +
 +
(Note: In case you lost your Optware configuration after reboot, please check /etc/init.d/rc.optware and replace 'array1' with 'disk1'.)
  
  

Revision as of 13:32, 22 September 2011

LinkStation Pro Duo LS-WVL/R1


LinkStation Pro Duo LS-WVL/R1
Machine Feroceon-KW (Kirkwood)
Board MVLSWV
CPU 88FR131 (88F6282) 1.6GHz Clock Speed (arm5te)
RAM 256MB
Flash ROM 512KB SPI flash + 512MB Hynix NAND flash
Other
NIC 1000/100/10Mbps
USB 1 x USB 2.0 HiSpeed
internal HDD ST32000542AS
IDE/SATA Controller
Drive Capacity 2TB, 4TB
Fan
initial Networkname LS-WVL... (last 3 are the end of the MAC address)
SOFTWARE
Toolchains
Opened Firmwares
Development Tools
GPL Kernel http://opensource.buffalo.jp/ls-x-140.html
Prebuild packages
HARDWARE
Board Please add here if you find or do some pictures.
Hardware Hacks
Other Please add here if you find or do some hardware hacks.

Optware & IPKG Install Guide

Once you have root access, you can start to install packages using IPKG.

Step 1 - Create a temp folder to download and run Optware installation file

 cd /tmp
 wget http://ipkg.nslu2-linux.org/feeds/optware/cs05q3armel/cross/stable/teraprov2-bootstrap_1.2-7_arm.xsh
 sh ./teraprov2-bootstrap_1.2-7_arm.xsh

Step 2 - Edit /opt/etc/ipkg.conf and add

 src cs08q1 http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/stable/
 # src cs08q1-unstable http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/unstable/

(If you wish to use the unstable branch you can uncomment it.)


After that just run `ipkg update` and you can then install packages with `ipkg install package` You can view list of installed packages with `ipkg list_installed`

(Note: In case you lost your Optware configuration after reboot, please check /etc/init.d/rc.optware and replace 'array1' with 'disk1'.)


These instructions are courtesy of: Category:LS-WXL

Notes

This is another new generation of LinkStation Pro, even newer than the LS-XHL and has again a faster CPU. LS-VL and LS-QVL should be similar except for the number of supported hard disks.

References