Category:LS-WVL

From NAS-Central Buffalo - The Linkstation Wiki

	LinkStation Pro Duo LS-WVL/R1
Machine	Feroceon-KW (Kirkwood)
Board	MVLSWV
CPU	88FR131 (88F6282) 1.6GHz Clock Speed (arm5te)
RAM	256MB
Flash ROM	none(?)
Other
NIC	1000/100/10Mbps
USB	1 x USB 2.0 HiSpeed
internal HDD	ST32000542AS
IDE/SATA Controller
Drive Capacity	2TB, 4TB
Fan
initial Networkname	LS-WVL... (last 3 are the end of the MAC address)

	SOFTWARE
Toolchains
Opened Firmwares	Telnet/SSH enabled firmware Open Stock Firmware LS-VL (and LW-WVL) Enable NFS for LS-VL (and LW-WVL) Enable Encrypted Partitions for LW-VL (and LW-WVL) using dm-crypt
Development Tools
GPL Kernel	http://opensource.buffalo.jp/ls-x-140.html
Prebuild packages	Optware feed is cs08q1armel (untested) This should work, as it works for Category:LS-VL. Please updated here it it worked for you. Available packages: http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/stable/Packages Bootstrap: http://ipkg.nslu2-linux.org/feeds/optware/cs08q1armel/cross/stable/ls-mvkw-bootstrap_1.2-7_arm.xsh Guide: Ipkg on the Linkstation (for end-users)
	HARDWARE
Board	Please add here if you find or do some pictures.
Hardware Hacks
Other	Please add here if you find or do some hardware hacks.

Notes

This is another new generation of LinkStation Pro, even newer than the LS-XHL and has again a faster CPU. LS-VL and LS-QVL should be similar except for the number of supported hard disks.

References

• buffalo-technology.com: LinkStation Pro Duo LS-WVL/R1