Difference between revisions of "Category:LS2"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
m (HDHLAN MIPSel (LS2): Fix broken RealTek link)
 
(23 intermediate revisions by 6 users not shown)
Line 1: Line 1:
[[Image:HD-H(G).jpg|frame|right]]
+
== HDHLAN MIPSel (LS2) ==
== mipsel-hdhlan ==
+
[[Image:HD-H(G).jpg|right]]
 +
:{| style="background:#DDDDDD; color:black"
 +
|- style="background:#BBBBBB; color:green"
 +
|
 +
| '''HDHLAN MIPSel (LS2)'''
 +
|-
 +
|  '''CPU'''
 +
| [http://www1.idt.com/?genID=79RC32434 400MHz IDT 79RC32434-400BC with MIPSel CPU core]
 +
|-
 +
| '''RAM'''
 +
| 64MB Micron MT 46V32MI6-SBC SDRAM
 +
|-
 +
| '''Flash ROM'''
 +
| [http://www.macronix.com/ 4MB Macronix MX29LV320T.] or ST M29W324DB
 +
|-
 +
| '''USB'''
 +
| [http://www.necel.com/usb/en/product/upd720101.html 2 type A(rear - /dev/usb/lp0, front - /dev/usb/lp1) - NEC D720101GJ]
 +
|-
 +
| '''NIC'''
 +
| [http://www.realtek.com.tw/search/default.aspx?keyword=RTL8110S-32 10/100Mb Realtek 8201CPPCI ethernet controller]
 +
|-
 +
| '''IDE Controller'''
 +
| [http://www.ite.com.tw/product_info/PC/Brief-IT8211.asp IT8211 PCI IDE disk controller.]
 +
|-
 +
| '''Stock Firmware'''
 +
| 2.x
 +
|-
 +
| '''More Information'''
 +
| [[Information/MIPSelOverview]]
 +
|-
 +
|}
  
are can be found on the main board:
 
  
* [http://www1.idt.com/pcms/products.taf?genID=79RC32434 IDT 79RC32434-400BC] Integrated Communications Processor, containing
 
** 32-bit @ 400MHz MIPSel CPU core (el -> le -> little endian) with MIPS32 instructions set architecture. Based on the MIPS 4Kc core.
 
** 10/100Mb Ethernet channel {:MII:Media Independent Interface}/{:RMII:Reduced Media Independent Interface} interface controller
 
** Serial UART, 16550 compatible
 
** DDR memory controller, can handle up to 256MB
 
** general purpose memory controller
 
** PCI controller
 
** DMA controller
 
** I'^2^'C bus
 
** general purpose I/O connectors
 
** JTAG interface (hardware-supported debugging)
 
** Watchdog timer
 
** No FPU (floating point is done via software emulation)
 
* [http://www.realtek.com.tw/downloads/downloads1-3.aspx?lineid=4&famid=All&series=2003092&Spec=True&refdesign=True|REALTEK 8201CP 'PHYceiver'] - Physical Ethernet tranceiver, connected to the ICP's Ethernet channel
 
* RAM - 64MB Micron MT 46V32MI6-SBC SDRAM
 
* Flash ROM - 4MB [http://www.macronix.com  Macronix] MX29LV320T.
 
* [http://www.ite.com.tw/product_info/PC/Brief-IT8211.asp  IT8211 PCI IDE disk controller]. The stock kernel driver reports an IT8212 (an IDE RAID 0/1/0+1 controller). However, there is indeed only a IT8211 on the board.
 
* USB - 2 type A connectors (rear - <tt>/dev/usb/lp0</tt>, front - <tt>/dev/usb/lp1</tt>) -
 
  
==Look Here==
+
About the only viable starting point with the LS2 is to install [[OpenLink]] by following the instructions on [[The LinkStation firmware flasher]]. Almost everything here will also require you to have installed the [[Precompiled C development environment, running on the LS]] as well.
[[Information/MIPSelOverview]]
+

Latest revision as of 18:54, 2 August 2008

HDHLAN MIPSel (LS2)

HD-H(G).jpg
HDHLAN MIPSel (LS2)
CPU 400MHz IDT 79RC32434-400BC with MIPSel CPU core
RAM 64MB Micron MT 46V32MI6-SBC SDRAM
Flash ROM 4MB Macronix MX29LV320T. or ST M29W324DB
USB 2 type A(rear - /dev/usb/lp0, front - /dev/usb/lp1) - NEC D720101GJ
NIC 10/100Mb Realtek 8201CPPCI ethernet controller
IDE Controller IT8211 PCI IDE disk controller.
Stock Firmware 2.x
More Information Information/MIPSelOverview


About the only viable starting point with the LS2 is to install OpenLink by following the instructions on The LinkStation firmware flasher. Almost everything here will also require you to have installed the Precompiled C development environment, running on the LS as well.

Pages in category "LS2"

The following 72 pages are in this category, out of 72 total.

A

B

C

D

F

G

G cont.

H

I

L

M

N

N cont.

O

P

R

S

T

U

V

W