Difference between revisions of "Category:LS2"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Getting Started)
(HDHLAN MIPSel (LS2))
Line 8: Line 8:
 
== HDHLAN MIPSel (LS2) ==
 
== HDHLAN MIPSel (LS2) ==
  
* [http://www1.idt.com/pcms/products.taf?genID=79RC32434 IDT 79RC32434-400BC] *[http://www.realtek.com.tw/downloads/downloads1-3.aspx?lineid=4&famid=All&series=2003092&Spec=True&refdesign=True|REALTEK 8201CP 'PHYceiver'] - Physical Ethernet tranceiver, connected to the ICP's Ethernet channel
+
 
 +
The following hardware can be found on the main board:
 +
 
 +
* CPU - [http://www1.idt.com/?genID=79RC32434 IDT 79RC32434-400BC] Integrated Communications Processor with 32-bit @ 400MHz MIPSel CPU core
 
* RAM - 64MB Micron MT 46V32MI6-SBC SDRAM
 
* RAM - 64MB Micron MT 46V32MI6-SBC SDRAM
 
* Flash ROM - 4MB [http://www.macronix.com  Macronix] MX29LV320T.
 
* Flash ROM - 4MB [http://www.macronix.com  Macronix] MX29LV320T.
* [http://www.ite.com.tw/product_info/PC/Brief-IT8211.asp  IT8211 PCI IDE disk controller]. The stock kernel driver reports an IT8212 (an IDE RAID 0/1/0+1 controller). However, there is indeed only a IT8211 on the board.
+
* USB - 2 type A
* USB - 2 type A connectors
+
* NIC - 10/100Mb Ethernet channel {:MII:Media Independent Interface}/{:RMII:Reduced Media Independent Interface} interface controller
 +
* IDE Controller [http://www.ite.com.tw/product_info/PC/Brief-IT8211.asp  IT8211 PCI]
 +
* AVR - AT????????
 +
* Stock Firmware - 2.x
  
 
Look Here: [[Information/MIPSelOverview]]
 
Look Here: [[Information/MIPSelOverview]]

Revision as of 19:53, 23 July 2006

This article Based on work by Mindbender, Mike Smith, AndreGauthier, Scotty, frontalot, marge, Nick, and Tyr. Originally by frontalot. on Linkstationwiki.org

HD-H(G).jpg

HDHLAN MIPSel (LS2)

The following hardware can be found on the main board:

  • CPU - IDT 79RC32434-400BC Integrated Communications Processor with 32-bit @ 400MHz MIPSel CPU core
  • RAM - 64MB Micron MT 46V32MI6-SBC SDRAM
  • Flash ROM - 4MB Macronix MX29LV320T.
  • USB - 2 type A
  • NIC - 10/100Mb Ethernet channel {:MII:Media Independent Interface}/{:RMII:Reduced Media Independent Interface} interface controller
  • IDE Controller IT8211 PCI
  • AVR - AT????????
  • Stock Firmware - 2.x

Look Here: Information/MIPSelOverview

Overview

This page lists articles about getting various bits of software working on the MIPSel Linkstation2. Although geared primarily towards the MIPSel variant with some modification most of these things could be accomplished on a PPC linkstation.

Getting Started

About the only viable starting point with the LS2 is to install OpenLink by following the instructions on The LinkStation firmware flasher. Almost everything here will also require you to have installed the Precompiled C development environment, running on the LS as well.

Pages in category "LS2"

The following 72 pages are in this category, out of 72 total.

A

B

C

D

F

G

G cont.

H

I

L

M

N

N cont.

O

P

R

S

T

U

V

W