Difference between revisions of "Category:LS2"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
Line 1: Line 1:
[[Image:HD-H(G).jpg|frame|right]]
 
__NOTOC__
 
 
== HDHLAN MIPSel (LS2) ==
 
== HDHLAN MIPSel (LS2) ==
 
+
[[Image:HD-H(G).jpg|frame|right]]
 
+
:{| style="background:#DDDDDD; color:black"
The following hardware can be found on the main board:
+
|- style="background:#BBBBBB; color:green"
 
+
|
* CPU - [http://www1.idt.com/?genID=79RC32434 IDT 79RC32434-400BC] with 32-bit @ 400MHz MIPSel CPU core
+
| '''HDHLAN MIPSel (LS2)'''
* RAM - 64MB Micron MT 46V32MI6-SBC SDRAM
+
|-
* Flash ROM - 4MB [http://www.macronix.com Macronix] MX29LV320T.
+
|  '''CPU'''
* USB - 2 type A connectors (rear - <tt>/dev/usb/lp0</tt>, front - <tt>/dev/usb/lp1</tt>) - [http://www.necel.com/usb/en/product/upd720101.html NEC D720101GJ].
+
| [http://www1.idt.com/?genID=79RC32434 400MHz IDT 79RC32434-400BC with MIPSel CPU core]
* NIC - 10/100Mb Ethernet channel [http://www.realtek.com.tw/downloads/downloads1-3.aspx?lineid=4&famid=All&series=2003092&Spec=True&refdesign=True REALTEK 8201CP 'PHYceiver']
+
|-
* IDE Controller [http://www.ite.com.tw/product_info/PC/Brief-IT8211.asp IT8211 PCI Ethernet Controller]
+
| '''RAM'''
* AVR - AT????????
+
| 64MB Micron MT 46V32MI6-SBC SDRAM
* Stock Firmware - 2.x  
+
|-
 +
| '''Flash ROM'''
 +
| [http://www.macronix.com/ 4MB Macronix MX29LV320T.]
 +
|-
 +
| '''USB'''
 +
| [http://www.necel.com/usb/en/product/upd720101.html 2 type A(rear - /dev/usb/lp0, front - /dev/usb/lp1) - NEC D720101GJ]
 +
|-
 +
| '''NIC'''
 +
| [http://www.realtek.com.tw/downloads/downloads1-3.aspx?lineid=4&famid=All&series=2003092&Spec=True&refdesign=True%7CREALTEK 10/100Mb Realtek 8201CPPCI ethernet controller]
 +
|-
 +
| '''IDE Controller'''
 +
| [http://www.ite.com.tw/product_info/PC/Brief-IT8211.asp IT8211 PCI IDE disk controller.]
 +
|-  
 +
| '''Stock Firmware'''
 +
| 2.x
 +
|-
 +
|}
  
 
Look Here: [[Information/MIPSelOverview]]
 
Look Here: [[Information/MIPSelOverview]]
  
 
About the only viable starting point with the LS2 is to install [[OpenLink]] by following the instructions on [[The LinkStation firmware flasher]]. Almost everything here will also require you to have installed the [[Precompiled C development environment, running on the LS]] as well.
 
About the only viable starting point with the LS2 is to install [[OpenLink]] by following the instructions on [[The LinkStation firmware flasher]]. Almost everything here will also require you to have installed the [[Precompiled C development environment, running on the LS]] as well.

Revision as of 03:49, 28 July 2006

HDHLAN MIPSel (LS2)

HD-H(G).jpg
HDHLAN MIPSel (LS2)
CPU 400MHz IDT 79RC32434-400BC with MIPSel CPU core
RAM 64MB Micron MT 46V32MI6-SBC SDRAM
Flash ROM 4MB Macronix MX29LV320T.
USB 2 type A(rear - /dev/usb/lp0, front - /dev/usb/lp1) - NEC D720101GJ
NIC 10/100Mb Realtek 8201CPPCI ethernet controller
IDE Controller IT8211 PCI IDE disk controller.
Stock Firmware 2.x

Look Here: Information/MIPSelOverview

About the only viable starting point with the LS2 is to install OpenLink by following the instructions on The LinkStation firmware flasher. Almost everything here will also require you to have installed the Precompiled C development environment, running on the LS as well.

Pages in category "LS2"

The following 72 pages are in this category, out of 72 total.

A

B

C

D

F

G

G cont.

H

I

L

M

N

N cont.

O

P

R

S

T

U

V

W