HDHLAN MIPSel (LS2)
HDHLAN MIPSel (LS2) CPU 400MHz IDT 79RC32434-400BC with MIPSel CPU core RAM 64MB Micron MT 46V32MI6-SBC SDRAM Flash ROM 4MB Macronix MX29LV320T. USB 2 type A(rear - /dev/usb/lp0, front - /dev/usb/lp1) - NEC D720101GJ NIC 10/100Mb Realtek 8201CPPCI ethernet controller IDE Controller IT8211 PCI IDE disk controller. Stock Firmware 2.x
Look Here: Information/MIPSelOverview
About the only viable starting point with the LS2 is to install OpenLink by following the instructions on The LinkStation firmware flasher. Almost everything here will also require you to have installed the Precompiled C development environment, running on the LS as well.
Pages in category "LS2"
The following 72 pages are in this category, out of 72 total.