Difference between revisions of "Convert your MIPSel LinkStation into a full-blown Debian system"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
m
 
(7 intermediate revisions by 4 users not shown)
Line 1: Line 1:
Temporary Tutorial | The information here will change a lot in the future but wanted to get the information out here.
+
{{Template:Articles}}
 +
{{Postit|Temporary Tutorial | The information here will change a lot in the future but wanted to get the information out here.}}
  
 +
<font color=red>''Originally by TcT and edited by frontalot from linkstationwiki.org''</font>
  
 
== Files ==
 
== Files ==
  
You can get the required files here http://www.geishuettner.de/docs/Linkstation/ and find more information in the [[http://linkstationwiki.org/forum/index.php?action=vthread&forum=3&topic=23 old linkstation forum!]] unil a nicer article finds it way here.
+
You can get the required files here http://www.geishuettner.de/docs/Linkstation/ and find more information in the [http://forum.nas-central.org/index.php?action=vthread&forum=3&topic=23&page=0 linkstationwiki forum!] until a nicer article finds it way here.
 
+
  
 
== Overview ==
 
== Overview ==
Line 22: Line 23:
  
 
You can always revert back to the stock firmware by running the ''swappart'' program again. In case something goes terribly wrong this can also be done from a PC when you connect the hard disk directly.
 
You can always revert back to the stock firmware by running the ''swappart'' program again. In case something goes terribly wrong this can also be done from a PC when you connect the hard disk directly.
 +
 +
[[Category:Debian]]
 +
[[Category:LS2]]
 +
[[Category:Howto]]

Latest revision as of 02:43, 11 September 2007

Temporary Tutorial
Bar.png
The information here will change a lot in the future but wanted to get the information out here.


Originally by TcT and edited by frontalot from linkstationwiki.org

Files

You can get the required files here http://www.geishuettner.de/docs/Linkstation/ and find more information in the linkstationwiki forum! until a nicer article finds it way here.

Overview

You don't have to open the linkstation in order to install Debian on it. You just need telnet access to your linkstation.

  1. Download the debil installer
  2. unpack it
  3. run the debil.sh script this will take you to the debian installer after downloading it
  4. After the installer is finished you have to swap your partitions using the included swappart program

This is just a quick overview for detailed instructions have a look at the [hacking howto (PDF)] at the page linked above.

Notes

The installer script will take your previous network configuration to the debian installation. My installation didn't boot when DHCP was enabled, so to be on the save side use a static IP address.

You can always revert back to the stock firmware by running the swappart program again. In case something goes terribly wrong this can also be done from a PC when you connect the hard disk directly.