Difference between revisions of "Debian Squeeze on 'V' and 'X' Series (LS-WXL and others)"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Personalize the deboostrap)
(Personalize the deboostrap)
Line 57: Line 57:
  
 
If apt-get complains that pts isn't accessible: ignore it or mount devpts (''mount -t devpts devpts /dev/pts'').
 
If apt-get complains that pts isn't accessible: ignore it or mount devpts (''mount -t devpts devpts /dev/pts'').
 +
 +
If you are going to set up a raid, install mdadm:
 +
mount -t proc proc /proc
 +
apt-get install --no-install-recommends mdadm
 +
umount /proc
 +
  
 
Editing /etc/fstab (with vi or nano):
 
Editing /etc/fstab (with vi or nano):
Line 70: Line 76:
 
  tmpfs            /tmp          tmpfs  defaults                0    0
 
  tmpfs            /tmp          tmpfs  defaults                0    0
 
  sysfs            /sys          sysfs  defaults                0    0
 
  sysfs            /sys          sysfs  defaults                0    0
 +
 +
If you are going to set up a raid, install mdadm:
  
 
Create disk1 in mnt:
 
Create disk1 in mnt:
 
   mkdir /mnt/disk1
 
   mkdir /mnt/disk1
 +
 +
If you are going to set up a raid, create array1 in mnt instead:
 +
  mkdir /mnt/array1
  
 
Edit /etc/network/interfaces to match your LAN configuration.
 
Edit /etc/network/interfaces to match your LAN configuration.
Line 138: Line 149:
 
   tar --numeric-owner -p -czf ../hddrootfs.buffalo.updated *
 
   tar --numeric-owner -p -czf ../hddrootfs.buffalo.updated *
  
Move hddrootfs.buffalo.updated to a folder that you can access from you computer.
+
* Move hddrootfs.buffalo.updated to a folder that you can access from you computer.
  
Download empty initrd from [http://tyche.pu-toyama.ac.jp/~a-urasim/lsxhl/data/initrd.buffalo] to your lsupdater folder.
+
Now prepare the "firmware installation":
 +
 
 +
* Remove initrd.img and hddrootfs.img from your lsupdater folder. (If you use 1.37mod1 kernel you just need to replace them when you copy these file)
 +
* Add debug options to lsupdate: open LSUpdater.ini and check that Flags and specialflags are set like this:
 +
[Flags]
 +
VersionCheck = 0
 +
NoFormatting = 1
 +
 +
[specialflags]
 +
debug = 1
  
Copy hddrootfs.buffalo.updated to your lsupdater folder.
+
* Copy hddrootfs.buffalo.updated to your lsupdater folder.
  
Remove initrd.img and hddrootfs.img from your lsupdater folder. (If you use 1.37mod1 kernel you just need to replace them when you copy these file)
+
* Download empty initrd from [http://tyche.pu-toyama.ac.jp/~a-urasim/lsxhl/data/initrd.buffalo] to your lsupdater folder. Yes, an empty initrd is okay: when the kernel boots up, it will just find nothing to do in the initrd and continue booting from the harddisk.
  
Add debug options to lsupdate: open LSUpdater.ini and check that Flags and specialflags are set like this:
+
* If you are going to set up a raid, you need to set up a [[Initrd for Raid-Boot]]. an put it into your lsupdater folder.
  [Flags]
+
  VersionCheck = 0
+
  NoFormatting = 1
+
 
+
  [specialflags]
+
  debug = 1
+
  
Update your NAS, reboot.
+
* Update your NAS, reboot.
  
Now you are on Debian Squeeze !
+
* Now you are on Debian Squeeze!
  
If you configured your nas before, some settings should be saved in a tgz file: /boot/conf_save.tgz
+
* If you configured your nas before, some settings should be saved in a tgz file: /boot/conf_save.tgz
  
 
== After install ==
 
== After install ==

Revision as of 21:27, 2 May 2011

Contents

Credits

This is based on Debian Lenny on LS-CHLv2 and Open Stock Firmware LS-XHL and was published first here [1] by user benoqkuke.

What will you get?

You will not have to open your box (at least not unless you make a fatal mistake)!
You will have a Debian Squeeze userland and the stock Buffalo kernel of your already installed firmware.
So it is not a full replacement of Buffalos firmware, but mostly. ;-)
To have a "complete" Debian Squeeze installation one would need to replace the kernel also. But user benoqkuke hasn't managed to build his own kernel (newer than 2.6.31) yet. So stay tuned, if you want to have a more recent kernel also.

What you need beforehand

You have to be able to use the root account on the NAS.
You can use [2] CHL-v2/XHL 1.37 Mod 1 firmware to do that.

Debootstrap

You need to install debootstrap.
To be able to do this, you need to download the package.
Log on as user root on your box and and execute this:

  wget http://ftp.us.debian.org/debian/pool/main/d/debootstrap/debootstrap_1.0.30_all.deb
  dpkg -i debootstrap_1.0.30_all.deb

To install the new rootfs into a directory "debian-squeeze" execute this:

  mkdir debian-squeeze
  debootstrap --verbose --arch armel squeeze debian-squeeze http://ftp.us.debian.org/debian

You may want to select a mirror nearby yourself for faster downloads.

When you see I: Base system installed successfully. the roots FS is almost ready.

Personalize the deboostrap

You need to have some other stuff to be able to boot off the boostrap.

Copy the initrd to the chroot environment:

  cp /boot/initrd.buffalo debian-squeeze/tmp

Chroot on Debian Squeeze:

  LANG=C chroot debian-squeeze /bin/bash

First of all update the package database to have the correct GPG-keys:

 apt-get update

Copy kernel modules from the linkstations initrd to the /lib/module folder:

  cd /tmp
  dd if=initrd.buffalo of=initrd.gz ibs=64 skip=1
  gunzip initrd.gz
  mkdir INITRD
  mount -t ext2 -o loop initrd INITRD 
  cp -R INITRD/lib/modules/2.6.[3-9]?* /lib/modules/
  umount INITRD
  rmdir INITRD
  rm initrd*

Configure locale: Suggestion is to install at least the en_US.UTF-8 and your native language locale (e.g. it_IT.UTF-8, de_DE.UTF-8, etc).

  apt-get install locales
  dpkg-reconfigure locales

If apt-get complains that pts isn't accessible: ignore it or mount devpts (mount -t devpts devpts /dev/pts).

If you are going to set up a raid, install mdadm:

mount -t proc proc /proc
apt-get install --no-install-recommends mdadm
umount /proc


Editing /etc/fstab (with vi or nano):

# /etc/fstab: static file system information.
#
# file system    mount point   type    options                  dump pass
/dev/sda2        /             xfs     defaults,noatime         0    1
/dev/sda1        /boot         ext3    ro,nosuid,nodev          0    2
/dev/sda5        none          swap    sw                       0    0
/dev/sda6        /mnt/disk1    xfs     defaults,noatime         0    0
proc             /proc         proc    defaults                 0    0
devpts           /dev/pts      devpts  gid=4,mode=620 	   0    0
tmpfs            /tmp          tmpfs   defaults                 0    0
sysfs            /sys          sysfs   defaults                 0    0

If you are going to set up a raid, install mdadm:

Create disk1 in mnt:

  mkdir /mnt/disk1

If you are going to set up a raid, create array1 in mnt instead:

  mkdir /mnt/array1

Edit /etc/network/interfaces to match your LAN configuration.

If you use DHCP, simply request an IP on eth0 an eth1:

# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.

# We always want the loopback interface.
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet dhcp

auto eth1
iface eth1 inet dhcp

If you have static IP: Make sure to use the correct interface name, otherwise your Linkstation may boot up but will not get an IP address. Check etc/udev/rules.d/70-persistent-net.rules for this.

# Used by ifup(8) and ifdown(8). See the interfaces(5) manpage or
# /usr/share/doc/ifupdown/examples for more information.

# We always want the loopback interface.
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
     address 192.168.1.6
     network 192.168.1.0
     netmask 255.255.255.0
     gateway 192.168.1.1

Set /etc/hostname

 echo > /etc/hostname MYNAS

Edit /etc/hosts to resolve your hostname

127.0.0.1       localhost.localdomain localhost
127.0.0.1       MYNAS
# The following lines are desirable for IPv6 capable hosts
::1 ip6-localhost ip6-loopback
fe00::0 ip6-localnet
ff00::0 ip6-mcastprefix
ff02::1 ip6-allnodes
ff02::2 ip6-allrouters
ff02::3 ip6-allhosts

Install sshd:

  apt-get install --no-install-recommends openssh-server

Change root password:

  passwd root

Check that root login is enable in /etc/ssh/sshd_config:

  grep PermitRootLogin /etc/ssh/sshd_config 

should show a line "PermitRootLogin yes".

Clean up the package database (this reduces the size quite a lot)

  aptitude clean

Prepare rootfs:

  exit
  cd debian-squeeze
  tar --numeric-owner -p -czf ../hddrootfs.buffalo.updated *
  • Move hddrootfs.buffalo.updated to a folder that you can access from you computer.

Now prepare the "firmware installation":

  • Remove initrd.img and hddrootfs.img from your lsupdater folder. (If you use 1.37mod1 kernel you just need to replace them when you copy these file)
  • Add debug options to lsupdate: open LSUpdater.ini and check that Flags and specialflags are set like this:
[Flags]
VersionCheck = 0
NoFormatting = 1

[specialflags]
debug = 1
  • Copy hddrootfs.buffalo.updated to your lsupdater folder.
  • Download empty initrd from [3] to your lsupdater folder. Yes, an empty initrd is okay: when the kernel boots up, it will just find nothing to do in the initrd and continue booting from the harddisk.
  • If you are going to set up a raid, you need to set up a Initrd for Raid-Boot. an put it into your lsupdater folder.
  • Update your NAS, reboot.
  • Now you are on Debian Squeeze!
  • If you configured your nas before, some settings should be saved in a tgz file: /boot/conf_save.tgz

After install

Install blstools:

  apt-get install smartmontools
  wget http://downloads.sourceforge.net/project/blstools/releases/blstools-0.2.0.tar.gz
  tar zxf blstools-0.2.0.tar.gz
  cd blstools-0.2.0
  sudo ./install.sh

Modify /etc/init.d/lsmonitor (the line where HDDTEMP is defined) to:

  # Retrieve HDD temp
       HDDTEMP=$(smartctl -d marvell /dev/sda --all -T permissive | awk '$1 == "194" {print $10}')

Turn on bootlogging:

  # nano /etc/default/bootlogd
       BOOTLOGD_ENABLE=yes

Install xfs tools:

  # apt-get install xfsprogs