Difference between revisions of "Debian avr evtd"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
Line 20: Line 20:
 
  cd /etc/rc6.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
 
  cd /etc/rc6.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
  
* Edit the start script to allow avr_evtd to run without udev installed
 
nano /etc/init.d/avr_evtd
 
and replace
 
cat /proc/tty/driver/serial | grep 80004500 | grep -q 0: && DEVICE=/dev/ttyS0 || DEVICE=/dev/ttyS1 uname -m | grep -q mips && MIPS=YES
 
with
 
if [ -e /dev/AVR00 ]; then
 
  DEVICE=/dev/AVR00
 
else
 
  cat /proc/tty/driver/serial | grep 80004500 | grep -q 0: && DEVICE=/dev/ttyS0 || DEVICE=/dev/ttyS1 uname -m | grep -q mips && MIPS=YES
 
fi
 
 
 
== Remove kuroevtd ==
 
== Remove kuroevtd ==
 
To avoid conflict between 2 applications that have the same goal, you need to remove kuroevtd :
 
To avoid conflict between 2 applications that have the same goal, you need to remove kuroevtd :

Revision as of 12:11, 22 June 2006

Contents

Why you should not use kuroevtd

kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;) kuroevtd's author didn't stopped his project, he just renamed it to avr_evtd as it can runs on the kurobox, but also on linkstation devices !

Install avr_evtd

tar xjf avr_evtd020606.tar.bz2 && cd avr_evtd/usr/src/avr_evtd
  • Build the file
make avr_evtd
  • Install the file
make install
  • Make avr_evtd running at startup and stoping at shutdown
cd /etc/rc0.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
cd /etc/rc1.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
cd /etc/rc2.d/ && ln -s ../init.d/avr_evtd S20avr_evtd
cd /etc/rc3.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
cd /etc/rc4.d/ && ln -s ../init.d/avr_evtd S20avr_evtd
cd /etc/rc5.d/ && ln -s ../init.d/avr_evtd S20avr_evtd
cd /etc/rc6.d/ && ln -s ../init.d/avr_evtd K20avr_evtd

Remove kuroevtd

To avoid conflict between 2 applications that have the same goal, you need to remove kuroevtd :

  • remove script file
rm /etc/init.d/kuroevtd 
  • remove start/stop symlinks
rm /etc/rc?.d/K20kuroevtd /etc/rc?.d/S20kuroevtd
  • remove configuration files
rm -r /etc/kuroevtd
  • remove application
rm /usr/sbin/kuroevtd

Conclusion

Now your power button can be used normaly (yeah !) You can also edit /etc/avr_evtd/EventScript file to assign different actions for a button (sending a message to a network device before shutting down for example, running a backup script when pressing the red button ...) !

--Sylver 14:59, 14 June 2006 (CDT)