Difference between revisions of "Debian avr evtd"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
m
 
(4 intermediate revisions by 3 users not shown)
Line 1: Line 1:
 +
{{Template:Articles|Kurobox|Debian}}
 
== Why you should not use kuroevtd ==
 
== Why you should not use kuroevtd ==
 
kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;)
 
kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;)
 
kuroevtd's author didn't stopped his project, he just renamed it to avr_evtd as it can runs on the kurobox, but also on linkstation devices !
 
kuroevtd's author didn't stopped his project, he just renamed it to avr_evtd as it can runs on the kurobox, but also on linkstation devices !
 +
 +
When you have installed Sylver's improved Debian image, this has already been done!
  
 
== Install avr_evtd ==
 
== Install avr_evtd ==
* Download avr_evtd from this page : https://sourceforge.net/project/showfiles.php?group_id=167880&package_id=190867
+
* Download avr_evtd from this page and move it to /: https://sourceforge.net/project/showfiles.php?group_id=167880&package_id=190867
 
* de-tar the file (was called avr_evtd020606.tar.bz2 when writing this guide)
 
* de-tar the file (was called avr_evtd020606.tar.bz2 when writing this guide)
  tar xjf avr_evtd020606.tar.bz2 && cd avr_evtd/usr/src/avr_evtd
+
  tar xzf avr_evtd020606.tar.bz2
 +
cd avr_evtd/usr/src/avr_evtd
 +
* Make sure you have installed the required packages to compile these files
 +
apt-get install gcc
 +
apt-get install libc6-dev
 
* Build the file
 
* Build the file
 
  make avr_evtd
 
  make avr_evtd
 
* Install the file
 
* Install the file
 
  make install
 
  make install
* Make avr_evtd running at startup and stoping at shutdown
+
* Make avr_evtd running at startup and stopping at shutdown
  cd /etc/rc0.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
+
  cd /etc/rc0.d/
  cd /etc/rc1.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
+
ln -s ../init.d/avr_evtd K20avr_evtd
  cd /etc/rc2.d/ && ln -s ../init.d/avr_evtd S20avr_evtd
+
 
  cd /etc/rc3.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
+
  cd /etc/rc1.d/
  cd /etc/rc4.d/ && ln -s ../init.d/avr_evtd S20avr_evtd
+
ln -s /init.d/avr_evtd K20avr_evtd
  cd /etc/rc5.d/ && ln -s ../init.d/avr_evtd S20avr_evtd
+
 
  cd /etc/rc6.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
+
  cd /etc/rc2.d/
 +
ln -s ../init.d/avr_evtd S20avr_evtd
 +
 
 +
  cd /etc/rc3.d/
 +
ln -s ../init.d/avr_evtd K20avr_evtd
 +
 
 +
  cd /etc/rc4.d/
 +
ln -s ../init.d/avr_evtd S20avr_evtd
 +
 
 +
  cd /etc/rc5.d/
 +
ln -s ../init.d/avr_evtd S20avr_evtd
 +
 
 +
  cd /etc/rc6.d/  
 +
ln -s ../init.d/avr_evtd K20avr_evtd
  
 
== Remove kuroevtd ==
 
== Remove kuroevtd ==

Latest revision as of 00:08, 13 July 2007

Contents

Why you should not use kuroevtd

kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;) kuroevtd's author didn't stopped his project, he just renamed it to avr_evtd as it can runs on the kurobox, but also on linkstation devices !

When you have installed Sylver's improved Debian image, this has already been done!

Install avr_evtd

tar xzf avr_evtd020606.tar.bz2
cd avr_evtd/usr/src/avr_evtd
  • Make sure you have installed the required packages to compile these files
apt-get install gcc
apt-get install libc6-dev
  • Build the file
make avr_evtd
  • Install the file
make install
  • Make avr_evtd running at startup and stopping at shutdown
cd /etc/rc0.d/
ln -s ../init.d/avr_evtd K20avr_evtd
cd /etc/rc1.d/
ln -s /init.d/avr_evtd K20avr_evtd
cd /etc/rc2.d/
ln -s ../init.d/avr_evtd S20avr_evtd
cd /etc/rc3.d/
ln -s ../init.d/avr_evtd K20avr_evtd
cd /etc/rc4.d/
ln -s ../init.d/avr_evtd S20avr_evtd
cd /etc/rc5.d/
ln -s ../init.d/avr_evtd S20avr_evtd
cd /etc/rc6.d/ 
ln -s ../init.d/avr_evtd K20avr_evtd

Remove kuroevtd

To avoid conflict between 2 applications that have the same goal, you need to remove kuroevtd :

  • remove script file
rm /etc/init.d/kuroevtd 
  • remove start/stop symlinks
rm /etc/rc?.d/K20kuroevtd /etc/rc?.d/S20kuroevtd
  • remove configuration files
rm -r /etc/kuroevtd
  • remove application
rm /usr/sbin/kuroevtd

Conclusion

Now your power button can be used normaly (yeah !) You can also edit /etc/avr_evtd/EventScript file to assign different actions for a button (sending a message to a network device before shutting down for example, running a backup script when pressing the red button ...) !

--Sylver 14:59, 14 June 2006 (CDT)