Debian avr evtd - Revision history

Ramuk at 00:08, 13 July 2007

Ramuk — Fri, 13 Jul 2007 00:08:47 GMT

← Older revision		Revision as of 00:08, 13 July 2007
Line 1:		Line 1:
		+	{{Template:Articles\|Kurobox\|Debian}}
	== Why you should not use kuroevtd ==		== Why you should not use kuroevtd ==
	kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;)		kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;)

Ramuk: 9 revision(s)

Ramuk — Thu, 12 Jul 2007 19:56:38 GMT

9 revision(s)

← Older revision

Revision as of 19:56, 12 July 2007

Jpeach: /* Install avr_evtd */

Jpeach — Tue, 14 Nov 2006 00:50:05 GMT

Install avr_evtd

← Older revision		Revision as of 00:50, 14 November 2006
Line 6:		Line 6:

	== Install avr_evtd ==		== Install avr_evtd ==
-	* Download avr_evtd from this page : https://sourceforge.net/project/showfiles.php?group_id=167880&package_id=190867	+	* Download avr_evtd from this page and move it to /: https://sourceforge.net/project/showfiles.php?group_id=167880&package_id=190867
	* de-tar the file (was called avr_evtd020606.tar.bz2 when writing this guide)		* de-tar the file (was called avr_evtd020606.tar.bz2 when writing this guide)
	tar xzf avr_evtd020606.tar.bz2		tar xzf avr_evtd020606.tar.bz2

Jpeach: /* Install avr_evtd */

Jpeach — Tue, 14 Nov 2006 00:48:21 GMT

Install avr_evtd

← Older revision		Revision as of 00:48, 14 November 2006
Line 8:		Line 8:
	* Download avr_evtd from this page : https://sourceforge.net/project/showfiles.php?group_id=167880&package_id=190867		* Download avr_evtd from this page : https://sourceforge.net/project/showfiles.php?group_id=167880&package_id=190867
	* de-tar the file (was called avr_evtd020606.tar.bz2 when writing this guide)		* de-tar the file (was called avr_evtd020606.tar.bz2 when writing this guide)
-	tar ~~xjf~~ avr_evtd020606.tar.bz2 && cd avr_evtd/usr/src/avr_evtd	+	tar xzf avr_evtd020606.tar.bz2
		+	cd avr_evtd/usr/src/avr_evtd
		+	* Make sure you have installed the required packages to compile these files
		+	apt-get install gcc
		+	apt-get install libc6-dev
	* Build the file		* Build the file
	make avr_evtd		make avr_evtd
	* Install the file		* Install the file
	make install		make install
-	* Make avr_evtd running at startup and ~~stoping~~ at shutdown	+	* Make avr_evtd running at startup and stopping at shutdown
-	cd /etc/rc0.d/ && ln -s ../init.d/avr_evtd K20avr_evtd	+	cd /etc/rc0.d/
-	cd /etc/rc1.d/ && ln -s ../init.d/avr_evtd K20avr_evtd	+	ln -s ../init.d/avr_evtd K20avr_evtd
-	cd /etc/rc2.d/ && ln -s ../init.d/avr_evtd S20avr_evtd	+
-	cd /etc/rc3.d/ && ln -s ../init.d/avr_evtd K20avr_evtd	+	cd /etc/rc1.d/
-	cd /etc/rc4.d/ && ln -s ../init.d/avr_evtd S20avr_evtd	+	ln -s /init.d/avr_evtd K20avr_evtd
-	cd /etc/rc5.d/ && ln -s ../init.d/avr_evtd S20avr_evtd	+
-	cd /etc/rc6.d/ && ln -s ../init.d/avr_evtd K20avr_evtd	+	cd /etc/rc2.d/
		+	ln -s ../init.d/avr_evtd S20avr_evtd
		+
		+	cd /etc/rc3.d/
		+	ln -s ../init.d/avr_evtd K20avr_evtd
		+
		+	cd /etc/rc4.d/
		+	ln -s ../init.d/avr_evtd S20avr_evtd
		+
		+	cd /etc/rc5.d/
		+	ln -s ../init.d/avr_evtd S20avr_evtd
		+
		+	cd /etc/rc6.d/
		+	ln -s ../init.d/avr_evtd K20avr_evtd

	== Remove kuroevtd ==		== Remove kuroevtd ==

Hendrik: /* Why you should not use kuroevtd */

Hendrik — Thu, 02 Nov 2006 22:37:27 GMT

Why you should not use kuroevtd

← Older revision		Revision as of 22:37, 2 November 2006
Line 2:		Line 2:
	kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;)		kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;)
	kuroevtd's author didn't stopped his project, he just renamed it to avr_evtd as it can runs on the kurobox, but also on linkstation devices !		kuroevtd's author didn't stopped his project, he just renamed it to avr_evtd as it can runs on the kurobox, but also on linkstation devices !
		+
		+	When you have installed Sylver's improved Debian image, this has already been done!

	== Install avr_evtd ==		== Install avr_evtd ==

Jkk: Category: Debian

Jkk — Mon, 10 Jul 2006 01:54:46 GMT

Category: Debian

← Older revision		Revision as of 01:54, 10 July 2006
Line 36:		Line 36:

	--[[User:Sylver\|Sylver]] 14:59, 14 June 2006 (CDT)		--[[User:Sylver\|Sylver]] 14:59, 14 June 2006 (CDT)
		+
		+	[[Category: Debian]]

62.8.24.122 at 12:11, 22 June 2006

62.8.24.122 — Thu, 22 Jun 2006 12:11:23 GMT

← Older revision		Revision as of 12:11, 22 June 2006
Line 20:		Line 20:
	cd /etc/rc6.d/ && ln -s ../init.d/avr_evtd K20avr_evtd		cd /etc/rc6.d/ && ln -s ../init.d/avr_evtd K20avr_evtd

-	* Edit the start script to allow avr_evtd to run without udev installed
-	~~nano /etc/init.d/avr_evtd~~
-	~~and replace~~
-	~~cat /proc/tty/driver/serial \| grep 80004500 \| grep -q 0: && DEVICE=/dev/ttyS0 \|\| DEVICE=/dev/ttyS1 uname -m \| grep -q mips && MIPS=YES~~
-	~~with~~
-	~~if [ -e /dev/AVR00 ]; then~~
-	~~DEVICE=/dev/AVR00~~
-	~~else~~
-	~~cat /proc/tty/driver/serial \| grep 80004500 \| grep -q 0: && DEVICE=/dev/ttyS0 \|\| DEVICE=/dev/ttyS1 uname -m \| grep -q mips && MIPS=YES~~
-	fi
-
	== Remove kuroevtd ==		== Remove kuroevtd ==
	To avoid conflict between 2 applications that have the same goal, you need to remove kuroevtd :		To avoid conflict between 2 applications that have the same goal, you need to remove kuroevtd :

Sylver at 09:14, 22 June 2006

Sylver — Thu, 22 Jun 2006 09:14:51 GMT

← Older revision		Revision as of 09:14, 22 June 2006
Line 1:		Line 1:
-	== Why not ~~using~~ kuroevtd ? ==	+	== Why you should not use kuroevtd ==
	kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;)		kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;)
	kuroevtd's author didn't stopped his project, he just renamed it to avr_evtd as it can runs on the kurobox, but also on linkstation devices !		kuroevtd's author didn't stopped his project, he just renamed it to avr_evtd as it can runs on the kurobox, but also on linkstation devices !

-	== Install avr_evtd ~~and remove kuroevtd~~ ==	+	== Install avr_evtd ==
	* Download avr_evtd from this page : https://sourceforge.net/project/showfiles.php?group_id=167880&package_id=190867		* Download avr_evtd from this page : https://sourceforge.net/project/showfiles.php?group_id=167880&package_id=190867
-	* to ~~be completed~~ ...	+	* de-tar the file (was called avr_evtd020606.tar.bz2 when writing this guide)
		+	tar xjf avr_evtd020606.tar.bz2 && cd avr_evtd/usr/src/avr_evtd
		+	* Build the file
		+	make avr_evtd
		+	* Install the file
		+	make install
		+	* Make avr_evtd running at startup and stoping at shutdown
		+	cd /etc/rc0.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
		+	cd /etc/rc1.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
		+	cd /etc/rc2.d/ && ln -s ../init.d/avr_evtd S20avr_evtd
		+	cd /etc/rc3.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
		+	cd /etc/rc4.d/ && ln -s ../init.d/avr_evtd S20avr_evtd
		+	cd /etc/rc5.d/ && ln -s ../init.d/avr_evtd S20avr_evtd
		+	cd /etc/rc6.d/ && ln -s ../init.d/avr_evtd K20avr_evtd
		+
		+	* Edit the start script to allow avr_evtd to run without udev installed
		+	nano /etc/init.d/avr_evtd
		+	and replace
		+	cat /proc/tty/driver/serial \| grep 80004500 \| grep -q 0: && DEVICE=/dev/ttyS0 \|\| DEVICE=/dev/ttyS1 uname -m \| grep -q mips && MIPS=YES
		+	with
		+	if [ -e /dev/AVR00 ]; then
		+	DEVICE=/dev/AVR00
		+	else
		+	cat /proc/tty/driver/serial \| grep 80004500 \| grep -q 0: && DEVICE=/dev/ttyS0 \|\| DEVICE=/dev/ttyS1 uname -m \| grep -q mips && MIPS=YES
		+	fi
		+
		+	== Remove kuroevtd ==
		+	To avoid conflict between 2 applications that have the same goal, you need to remove kuroevtd :
		+	* remove script file
		+	rm /etc/init.d/kuroevtd
		+	* remove start/stop symlinks
		+	rm /etc/rc?.d/K20kuroevtd /etc/rc?.d/S20kuroevtd
		+	* remove configuration files
		+	rm -r /etc/kuroevtd
		+	* remove application
		+	rm /usr/sbin/kuroevtd

	== Conclusion ==		== Conclusion ==

Sylver: /* Why not using kuroevtd ? */

Sylver — Thu, 15 Jun 2006 07:44:13 GMT

Why not using kuroevtd ?

← Older revision		Revision as of 07:44, 15 June 2006
Line 1:		Line 1:
	== Why not using kuroevtd ? ==		== Why not using kuroevtd ? ==
	kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;)		kuroevtd is old and is not working well ! Most people can't switch off their kurobox by pressing the power button, and it's kuroevtd's fault ;)
-	kuroevtd's author didn't stopped his project, he just renamed it to avr_evtd as it can runs on the kurobox, but also on ~~linstation~~ devices !	+	kuroevtd's author didn't stopped his project, he just renamed it to avr_evtd as it can runs on the kurobox, but also on linkstation devices !
-		+

	== Install avr_evtd and remove kuroevtd ==		== Install avr_evtd and remove kuroevtd ==

Sylver at 19:59, 14 June 2006

Sylver — Wed, 14 Jun 2006 19:59:41 GMT

← Older revision		Revision as of 19:59, 14 June 2006
Line 11:		Line 11:
	Now your power button can be used normaly (yeah !)		Now your power button can be used normaly (yeah !)
	You can also edit /etc/avr_evtd/EventScript file to assign different actions for a button (sending a message to a network device before shutting down for example, running a backup script when pressing the red button ...) !		You can also edit /etc/avr_evtd/EventScript file to assign different actions for a button (sending a message to a network device before shutting down for example, running a backup script when pressing the red button ...) !
		+
		+	--[[User:Sylver\|Sylver]] 14:59, 14 June 2006 (CDT)