Disassemble the LS Pro v1/LS Live v1
From NAS-Central Buffalo - The Linkstation Wiki
Mindbender (Talk | contribs) m |
Mindbender (Talk | contribs) m |
||
| Line 1: | Line 1: | ||
{{Articles|LSPro|Hacking}} | {{Articles|LSPro|Hacking}} | ||
| - | |||
| - | |||
== Why should i disassemble my LS Pro? == | == Why should i disassemble my LS Pro? == | ||
| Line 10: | Line 8: | ||
== How to get out the HDD == | == How to get out the HDD == | ||
| + | |||
| + | '''All steps below in a full video:'''<br> | ||
<youtube>zRtoPmVd9CU</youtube> | <youtube>zRtoPmVd9CU</youtube> | ||
[http://www.youtube.com/watch?v=zRtoPmVd9CU Video - Getting the HDD out in 2 minutes]<br> | [http://www.youtube.com/watch?v=zRtoPmVd9CU Video - Getting the HDD out in 2 minutes]<br> | ||
Revision as of 01:04, 7 September 2007
Contents |
Why should i disassemble my LS Pro?
- If you want to upgrade the HDD inside
- If your box is unbootable and you want to connect it to a desktop for data recovery
- because you can!
How to get out the HDD
All steps below in a full video:
Video - Getting the HDD out in 2 minutes
Video - Using a cordless screwdriver - 1 minute
10 Steps to get the HDD out of the Case
1. Here it is..my shiny new LS Pro
2.We need to remove this 2 screws on the bottom first
3.First...
4...Second
5.Now we need to open the case...look at the video.
Short Video - Opening the Case
6.Now we need to remove this 4 screws...
7.Short note for assembly: It was that way...
8.This is the last screw we need to remove..
9.
Short Video - Pulling out the HDD
10.Here it is...unplug it and do whatever you like...
Removing the Mainboard
1.Do all steps mentioned above
2.Removing the Sata-cable, Fan-Cable & the Power Cable from the Mainboard ..
3.Removing the Faceplate
4.Removing the screw on the back
5.Removing the Backplate
6.Removing the screws on the Mainboard
7.Removing the Mainboard
Interesting parts of the Case
Prepared Serial Port inside the case, the PSU and the mainboard
