Disassemble the LS Pro v1/LS Live v1

From NAS-Central Buffalo - The Linkstation Wiki

Revision as of 22:21, 13 December 2006 by Mindbender (Talk | contribs)
Jump to: navigation, search

10 Steps to get the HDD out of the Case

1. Here it is..my shiny new LS Pro
Image:Disassemble_LS_Pro_1.JPG

2.We need to remove this 2 screws on the bottom first
Image:Disassemble_LS_Pro_2.JPG

3.First...
Image:Disassemble_LS_Pro_3.JPG

4...Second
Image:Disassemble_LS_Pro_4.JPG

5.Now we need to open the case...look at the video.
Image:Disassemble_LS_Pro_5.JPG

Short Video - Opening the Case

6.Now we need to remove this 4 screws...
Image:Disassemble_LS_Pro_6.JPG

7.Short note for assembly: It was that way...
Image:Disassemble_LS_Pro_7.JPG

8.This is the last screw we need to remove..
Image:Disassemble_LS_Pro_8.JPG

9.
Short Video - Pulling out the HDD

10.Here it is...unplug it and do whatever you like...
Image:Disassemble_LS_Pro_9.JPG


And now all steps again in a full video:
Video - Getting the HDD out in 2 Minutes

Retrieved from "http://buffalo.nas-central.org/wiki/Disassemble_the_LS_Pro_v1/LS_Live_v1"
Personal tools