Disassemble the LS Pro v1/LS Live v1

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 12:34, 26 January 2007 by Mindbender (Talk | contribs)

Jump to: navigation, search

All steps below in a full video:

How to get out the HDD

Video - Getting the HDD out in 2 minutes

Video - Using a cordless screwdriver - 1 minute

10 Steps to get the HDD out of the Case

1. Here it is..my shiny new LS Pro
Disassemble LS Pro 1.JPG

2.We need to remove this 2 screws on the bottom first
Disassemble LS Pro 2.JPG

Disassemble LS Pro 3.JPG

Disassemble LS Pro 4.JPG

5.Now we need to open the case...look at the video.
Disassemble LS Pro 5.JPG

Short Video - Opening the Case

6.Now we need to remove this 4 screws...
Disassemble LS Pro 6.JPG

7.Short note for assembly: It was that way...
Disassemble LS Pro 7.JPG

8.This is the last screw we need to remove..
Disassemble LS Pro 8.JPG


Short Video - Pulling out the HDD

10.Here it is...unplug it and do whatever you like...
Disassemble LS Pro 9.JPG

Removing the Mainboard

1.Do all steps mentioned above
2.Removing the Sata-cable, Fan-Cable & the Power Cable from the Mainboard ..

3.Removing the Faceplate

4.Removing the screw on the back

5.Removing the Backplate

6.Removing the screws on the Mainboard
LSPro Mainboard screws and more.JPG
7.Removing the Mainboard

8.Interesting parts of the LS Pro - Prepared Serial Port inside the case, the PSU and the mainboard