Difference between revisions of "Enable NFS for LS-VL"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Created page with "=Do I need to install a new kernel?= No you don't.<br> At least with firmware 1.36, Buffalo already built the kernel with NFSD support enabled.<br> =What is missing?= The "only"…")
 
(What is missing?)
Line 5: Line 5:
 
=What is missing?=
 
=What is missing?=
 
The "only" missing stuff are the nfs_utils.<br>
 
The "only" missing stuff are the nfs_utils.<br>
Unfortunately the optware feed for the LS-VL does not contain the nfs_utils due to build problems.<br>
+
Unfortunately the optware feed for the LS-VL does not contain the complete nfs_utils due to build problems.<br>
 
Serendipitously (I always wanted to use this word ;-) ) I built the necessary tools and scripts when I built the [[Ready-to-use NFS kernel]].<font color=red size=4>Do not use this kernel for the LS-VL!</font><br>
 
Serendipitously (I always wanted to use this word ;-) ) I built the necessary tools and scripts when I built the [[Ready-to-use NFS kernel]].<font color=red size=4>Do not use this kernel for the LS-VL!</font><br>
 +
 +
You DO need the package "portmap" from Optware installed!
  
 
=What do you have to do?=
 
=What do you have to do?=

Revision as of 11:14, 5 February 2011

Do I need to install a new kernel?

No you don't.
At least with firmware 1.36, Buffalo already built the kernel with NFSD support enabled.

What is missing?

The "only" missing stuff are the nfs_utils.
Unfortunately the optware feed for the LS-VL does not contain the complete nfs_utils due to build problems.
Serendipitously (I always wanted to use this word ;-) ) I built the necessary tools and scripts when I built the Ready-to-use NFS kernel.Do not use this kernel for the LS-VL!

You DO need the package "portmap" from Optware installed!

What do you have to do?

Download this tarball to the share "share":

  http://downloads.buffalo.nas-central.org/Users/kenatonline/NFSKernel/nfstools.tar.gz

Then connect as user "root" to your LS-VL via ssh. Change to the root directory.

  cd /

Unpack the tarball.

  tar xvzf /mnt/disk1/share/nfstools.tar.gz

Configure nfsd.

  NFS for Beginners

Either reboot the box or just start the nfsd.

  /etc/rc.d/extensions.d/S98_nfs.sh start

Wait at least one minute before you check for success.

  /etc/rc.d/extensions.d/S98_nfs.sh status

It should return this:

 portmap is running.
 mountd is running.
 nfsd is running.
 statd is running.
 lockd is running.
 All kernel NFS services running.