Enable NFS for LS-VL
From NAS-Central Buffalo - The Linkstation Wiki
Kenatonline (Talk | contribs) (→What do you have to do?) |
Kenatonline (Talk | contribs) m (→What is missing?) |
||
| Line 8: | Line 8: | ||
Serendipitously (I always wanted to use this word ;-) ) I built the necessary tools and scripts when I built the [[Ready-to-use NFS kernel]].<font color=red size=4>Do not use this kernel for the LS-VL!</font><br> | Serendipitously (I always wanted to use this word ;-) ) I built the necessary tools and scripts when I built the [[Ready-to-use NFS kernel]].<font color=red size=4>Do not use this kernel for the LS-VL!</font><br> | ||
| - | You DO need the package "portmap" from Optware installed! | + | You DO need the package "portmap" (and maybe also "e2fslibs") from Optware installed! |
=What do you have to do?= | =What do you have to do?= | ||
Revision as of 09:30, 26 February 2011
Do I need to install a new kernel?
No you don't.
At least with firmware 1.36, Buffalo already built the kernel with NFSD support enabled.
What is missing?
The "only" missing stuff are the nfs_utils.
Unfortunately the optware feed for the LS-VL does not contain the complete nfs_utils due to build problems.
Serendipitously (I always wanted to use this word ;-) ) I built the necessary tools and scripts when I built the Ready-to-use NFS kernel.Do not use this kernel for the LS-VL!
You DO need the package "portmap" (and maybe also "e2fslibs") from Optware installed!
What do you have to do?
Download this tarball to the share "share":
http://downloads.buffalo.nas-central.org/Users/kenatonline/NFSKernel/nfstools.tar.gz
Then connect as user "root" to your LS-VL via ssh. Change to the root directory.
cd /
Unpack the tarball.
tar xvzf /mnt/disk1/share/nfstools.tar.gz
Configure nfsd.
NFS for Beginners
Either reboot the box or just start the nfsd.
/etc/rc.d/extensions.d/S98_nfs.sh start
Wait at least one minute before you check for success.
/etc/rc.d/extensions.d/S98_nfs.sh status
It should return this:
portmap is running. mountd is running. nfsd is running. statd is running. lockd is running. All kernel NFS services running.
