Enable NFS for LS-VL
Do I need to install a new kernel?
No you don't.
At least with firmware 1.36, Buffalo already built the kernel with NFSD (NFS version 3) support enabled. Firmware 1.54 is verified to work as well.
What is missing?
The "only" missing stuff are the nfs_utils.
Unfortunately the optware feed for the LS-VL does not contain the complete nfs_utils due to build problems.
Serendipitously (I always wanted to use this word ;-) ) I built the necessary tools and scripts when I built the Ready-to-use NFS kernel. Do not use this kernel for the LS-VL!
You DO need the packages "portmap" and "e2fslibs" from Optware installed! It will not work without!
What do you have to do?
Download this tarball to the share "share":
Then connect as user "root" to your LS-VL via ssh. Change to the root directory.
Unpack the tarball.
tar xvzf /mnt/disk1/share/nfstools.tar.gz
Either reboot the box or just start the nfsd.
Wait at least one minute before you check for success.
It should return this:
portmap is running. mountd is running. nfsd is running. statd is running. lockd is running. All kernel NFS services running.