Fan - Revision history

Discojohnson at 20:03, 14 October 2010

Discojohnson — Thu, 14 Oct 2010 20:03:56 GMT

← Older revision		Revision as of 20:03, 14 October 2010
Line 40:		Line 40:
	* Vendor: Mouser Electronics, Part Number: AD0412LX-G76-LF, Website: http://www.mouser.com . Update. Mouser has an excellent searchable parts database. If this part is discontinued, simply search for any 40mm x 40mm x 10mm, 12VCD fan, with a CFM rating of around 5 to 8 (cubic feet per minute).		* Vendor: Mouser Electronics, Part Number: AD0412LX-G76-LF, Website: http://www.mouser.com . Update. Mouser has an excellent searchable parts database. If this part is discontinued, simply search for any 40mm x 40mm x 10mm, 12VCD fan, with a CFM rating of around 5 to 8 (cubic feet per minute).

-	* Silenx.com , Part Number: IXP-11-14 , iXtrema Pro Series Quiet Fan. I used this to replace the fan on a salvage-grade LS2 that I received, and it fit pretty well. It is nearly silent. The only dodgy bit was that the wires were not color coded as on the LS2's original unit, so a few minutes of trial and error were necessary to get the correct connection scheme. [[User:Davygravy\|Davygravy]]	+	* Silenx.com , Part Number: IXP-11-14 , iXtrema Pro Series Quiet Fan. I used this to replace the fan on a salvage-grade LS2 that I received, and it fit pretty well. It is nearly silent. The only dodgy bit was that the wires were not color coded as on the LS2's original unit, so a few minutes of trial and error were necessary to get the correct connection scheme. [[User:Davygravy\|Davygravy]] The pinout (when the wires are closest to you) is: top=sense, middle=ground, bottom=positive [[User:discojohnson\|discojohnson]]

	==Failure==		==Failure==

Davygravy at 02:34, 11 February 2009

Davygravy — Wed, 11 Feb 2009 02:34:49 GMT

← Older revision		Revision as of 02:34, 11 February 2009
Line 1:		Line 1:
-	~~[[Category~~:Kurobox\|LS1\|LS2\|HG\|HS]]	+	{{Template:Articles\|Kurobox\|LS1\|LS2\|HG\|HS\|Hardware}}
	[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]		[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]
	The Kurobox/KuroboxHG, LS1, LS2, LS-HG and LS-HS [[case \| cases]] have a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the LS or Kurobox has two fan speed presets-- slow or fast.		The Kurobox/KuroboxHG, LS1, LS2, LS-HG and LS-HS [[case \| cases]] have a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the LS or Kurobox has two fan speed presets-- slow or fast.

Davygravy at 01:59, 11 February 2009

Davygravy — Wed, 11 Feb 2009 01:59:18 GMT

← Older revision		Revision as of 01:59, 11 February 2009
Line 1:		Line 1:
-	[[Category:Kurobox\|LS1\|LS2\|~~LSHG~~]]	+	[[Category:Kurobox\|LS1\|LS2\|HG\|HS]]
	[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]		[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]
	The Kurobox/KuroboxHG, LS1, LS2, LS-HG and LS-HS [[case \| cases]] have a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the LS or Kurobox has two fan speed presets-- slow or fast.		The Kurobox/KuroboxHG, LS1, LS2, LS-HG and LS-HS [[case \| cases]] have a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the LS or Kurobox has two fan speed presets-- slow or fast.

Davygravy at 01:58, 11 February 2009

Davygravy — Wed, 11 Feb 2009 01:58:16 GMT

← Older revision		Revision as of 01:58, 11 February 2009
Line 1:		Line 1:
	[[Category:Kurobox\|LS1\|LS2\|LSHG]]		[[Category:Kurobox\|LS1\|LS2\|LSHG]]
	[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]		[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]
-	The Kurobox/KuroboxHG, LS1, LS2, LS-HG and LS-HS [[cases]] have a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the LS or Kurobox has two fan speed presets-- slow or fast.	+	The Kurobox/KuroboxHG, LS1, LS2, LS-HG and LS-HS [[case \| cases]] have a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the LS or Kurobox has two fan speed presets-- slow or fast.

	The fan used in all of these is a ADDA AD0412LX-G76 which measures 40mm x 40mm x 10mm. By looking at the model number, we can extract it's information:		The fan used in all of these is a ADDA AD0412LX-G76 which measures 40mm x 40mm x 10mm. By looking at the model number, we can extract it's information:

Davygravy at 01:56, 11 February 2009

Davygravy — Wed, 11 Feb 2009 01:56:20 GMT

← Older revision		Revision as of 01:56, 11 February 2009
Line 1:		Line 1:
-	[[Category:Kurobox]]	+	[[Category:Kurobox\|LS1\|LS2\|LSHG]]
	[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]		[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]
-	The Kurobox [[~~case~~]] ~~has~~ a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the Kurobox has two fan speed presets-- slow or fast.	+	The Kurobox/KuroboxHG, LS1, LS2, LS-HG and LS-HS [[cases]] have a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the LS or Kurobox has two fan speed presets-- slow or fast.

-	The fan used in ~~the Kurobox~~ is a ADDA AD0412LX-G76 which measures 40mm x 40mm x 10mm. By looking at the model number, we can extract it's information:	+	The fan used in all of these is a ADDA AD0412LX-G76 which measures 40mm x 40mm x 10mm. By looking at the model number, we can extract it's information:

	{\| border="1" cellpadding="3"		{\| border="1" cellpadding="3"

Davygravy: /* Replacement */

Davygravy — Tue, 10 Feb 2009 21:23:24 GMT

Replacement

← Older revision		Revision as of 21:23, 10 February 2009
Line 40:		Line 40:
	* Vendor: Mouser Electronics, Part Number: AD0412LX-G76-LF, Website: http://www.mouser.com . Update. Mouser has an excellent searchable parts database. If this part is discontinued, simply search for any 40mm x 40mm x 10mm, 12VCD fan, with a CFM rating of around 5 to 8 (cubic feet per minute).		* Vendor: Mouser Electronics, Part Number: AD0412LX-G76-LF, Website: http://www.mouser.com . Update. Mouser has an excellent searchable parts database. If this part is discontinued, simply search for any 40mm x 40mm x 10mm, 12VCD fan, with a CFM rating of around 5 to 8 (cubic feet per minute).

-	* Silenx.com , Part Number: IXP-11-14 , iXtrema Pro Series Quiet Fan. I used this to replace the fan on a salvage-grade LS2 that I received, and it fit pretty well. It is nearly silent. The only dodgy bit was that the wires were not color coded as on the LS2's original unit, so a few minutes of trial and error were necessary to get the correct connection scheme.	+	* Silenx.com , Part Number: IXP-11-14 , iXtrema Pro Series Quiet Fan. I used this to replace the fan on a salvage-grade LS2 that I received, and it fit pretty well. It is nearly silent. The only dodgy bit was that the wires were not color coded as on the LS2's original unit, so a few minutes of trial and error were necessary to get the correct connection scheme. [[User:Davygravy\|Davygravy]]

	==Failure==		==Failure==

Davygravy: /* Replacement */

Davygravy — Tue, 10 Feb 2009 21:22:52 GMT

Replacement

← Older revision		Revision as of 21:22, 10 February 2009
Line 38:		Line 38:

	Also by:		Also by:
-	Vendor: Mouser Electronics, Part Number: AD0412LX-G76-LF, Website: http://www.mouser.com	+	* Vendor: Mouser Electronics, Part Number: AD0412LX-G76-LF, Website: http://www.mouser.com . Update. Mouser has an excellent searchable parts database. If this part is discontinued, simply search for any 40mm x 40mm x 10mm, 12VCD fan, with a CFM rating of around 5 to 8 (cubic feet per minute).
		+
		+	* Silenx.com , Part Number: IXP-11-14 , iXtrema Pro Series Quiet Fan. I used this to replace the fan on a salvage-grade LS2 that I received, and it fit pretty well. It is nearly silent. The only dodgy bit was that the wires were not color coded as on the LS2's original unit, so a few minutes of trial and error were necessary to get the correct connection scheme.

	==Failure==		==Failure==

Zwickel at 05:24, 30 May 2008

Zwickel — Fri, 30 May 2008 05:24:37 GMT

← Older revision		Revision as of 05:24, 30 May 2008
Line 36:		Line 36:
	==Replacement==		==Replacement==
	[[Kurouto Shikou]] in Japan sells a [[KURO-BOX/PARTS\|replacement parts kit]] which includes a replacement fan, however, you should be able to replace it with another fan with the same physical dimensions. If you decide to go this route, you will need to make physical modifications to the wire leads from the fan.		[[Kurouto Shikou]] in Japan sells a [[KURO-BOX/PARTS\|replacement parts kit]] which includes a replacement fan, however, you should be able to replace it with another fan with the same physical dimensions. If you decide to go this route, you will need to make physical modifications to the wire leads from the fan.
		+
		+	Also by:
		+	Vendor: Mouser Electronics, Part Number: AD0412LX-G76-LF, Website: http://www.mouser.com

	==Failure==		==Failure==

Mprior at 07:40, 25 April 2008

Mprior — Fri, 25 Apr 2008 07:40:23 GMT

← Older revision		Revision as of 07:40, 25 April 2008
Line 35:		Line 35:

	==Replacement==		==Replacement==
-	[[Kurouto Shikou]] in Japan sells a [[KURO-BOX/PARTS\|replacement parts kit]] which includes a replacement fan, however, you should be able to replace it with another fan with the same physical dimensions. If you decide to go this route, you will need to make physical modifications to the wire leads from the fan.	+	[[Kurouto Shikou]] in Japan sells a [[KURO-BOX/PARTS\|replacement parts kit]] which includes a replacement fan, however, you should be able to replace it with another fan with the same physical dimensions. If you decide to go this route, you will need to make physical modifications to the wire leads from the fan.
		+
		+	==Failure==
		+	I have two Buffalo Linkstations which also use this model of fan. Both units suffered fan failure with two months of each other. This occurred after a total period of deployment of approximately 20 months each of always on usage. Ambient temperatures never rose above 23C and the units were only lightly loaded during the whole period. At all times case temperatures remained sensibly low. The extended life claims from ADDA about their HYPRO bearing design were not evident from these two sample units.

	==External Links==		==External Links==

Ramuk at 00:06, 13 July 2007

Ramuk — Fri, 13 Jul 2007 00:06:15 GMT

← Older revision		Revision as of 00:06, 13 July 2007
Line 1:		Line 1:
		+	[[Category:Kurobox]]
	[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]		[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]
	The Kurobox [[case]] has a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the Kurobox has two fan speed presets-- slow or fast.		The Kurobox [[case]] has a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the Kurobox has two fan speed presets-- slow or fast.

← Older revision		Revision as of 02:34, 11 February 2009
Line 1:		Line 1:
-	~~[[Category~~:Kurobox\|LS1\|LS2\|HG\|HS]]	+	{{Template:Articles\|Kurobox\|LS1\|LS2\|HG\|HS\|Hardware}}
	[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]		[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]
	The Kurobox/KuroboxHG, LS1, LS2, LS-HG and LS-HS [[case \| cases]] have a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the LS or Kurobox has two fan speed presets-- slow or fast.		The Kurobox/KuroboxHG, LS1, LS2, LS-HG and LS-HS [[case \| cases]] have a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the LS or Kurobox has two fan speed presets-- slow or fast.

← Older revision		Revision as of 01:59, 11 February 2009
Line 1:		Line 1:
-	[[Category:Kurobox\|LS1\|LS2\|~~LSHG~~]]	+	[[Category:Kurobox\|LS1\|LS2\|HG\|HS]]
	[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]		[[Image:ADDA AD0412LX-G76.jpg\|thumb\|right\|The Kuro Box's Fan]]
	The Kurobox/KuroboxHG, LS1, LS2, LS-HG and LS-HS [[case \| cases]] have a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the LS or Kurobox has two fan speed presets-- slow or fast.		The Kurobox/KuroboxHG, LS1, LS2, LS-HG and LS-HS [[case \| cases]] have a built in 40mm fan, which can run at variable speeds controlled through the [[microcontroller]]. In this case the LS or Kurobox has two fan speed presets-- slow or fast.