FreeLink for the MIPSel (LS2) LinkStation

From NAS-Central Buffalo - The Linkstation Wiki

Revision as of 10:29, 24 July 2006 (view source) Ramuk (Talk | contribs) ← Older edit		Revision as of 10:31, 24 July 2006 (view source) Ramuk (Talk | contribs) (→Installed applications:) Newer edit →
Line 21:		Line 21:
	==Installed applications:==		==Installed applications:==
-	gcc	+	*gcc
-	libc-dev	+	*libc-dev
-	libc6-dev	+	*libc6-dev
-	make	+	*make
-	nano	+	*nano
-	avr_evtd	+	*avr_evtd
	Good luck all!		Good luck all!

---

Revision as of 10:31, 24 July 2006

WARNING! There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.

From the Forums:

• Freelink for the mips - Testers required

Freelink for the MIPS.

This has been packaged up as a image.dat suitable for flashing, however, it would be advisable for those who have opened their LS2s to unzip it manually an knoppix it onto the box.

==Info about this freelink== download and is currently being uploaded (60Mb) ......

as required by the firmware updater image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l It has a static IP assigned to 192.168.11.150 root password is "root" if required telnet is enabled...no ssh

avr_evtd ver 1.6 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button)

Installed applications:

• gcc
• libc-dev
• libc6-dev
• make
• nano
• avr_evtd

Good luck all!

-User:SpannerInTheWorks