Difference between revisions of "FreeLink for the MIPSel (LS2) LinkStation"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Info about this freelink)
Line 13: Line 13:
 
==Info about this freelink== [http://downloads.linkstationwiki.net/freelink/development/freelink_mipsel-hdhlan-060723.zip download] and is currently being uploaded (60Mb) ......
 
==Info about this freelink== [http://downloads.linkstationwiki.net/freelink/development/freelink_mipsel-hdhlan-060723.zip download] and is currently being uploaded (60Mb) ......
  
as required by the firmware updater image.dat password = *1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
+
as required by the firmware updater image.dat password =  
 +
* 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
 
It has a static IP assigned to 192.168.11.150
 
It has a static IP assigned to 192.168.11.150
 
root password is "root" if required
 
root password is "root" if required

Revision as of 10:32, 24 July 2006

Nuvola apps important.png 
WARNING!


Kurobrick.png
WARNING!

There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.



From the Forums:

Freelink for the MIPS.

This has been packaged up as a image.dat suitable for flashing, however, it would be advisable for those who have opened their LS2s to unzip it manually an knoppix it onto the box.


==Info about this freelink== download and is currently being uploaded (60Mb) ......

as required by the firmware updater image.dat password =

  • 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l

It has a static IP assigned to 192.168.11.150 root password is "root" if required telnet is enabled...no ssh

avr_evtd ver 1.6 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button)

Installed applications:

  • gcc
  • libc-dev
  • libc6-dev
  • make
  • nano
  • avr_evtd

Good luck all!

-User:SpannerInTheWorks