Difference between revisions of "FreeLink for the MIPSel (LS2) LinkStation"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(One warning is enough.)
(Info about this freelink)
Line 10: Line 10:
  
  
==Info about this freelink== [http://downloads.linkstationwiki.net/freelink/development/freelink_mipsel-hdhlan-060723.zip download] and is currently being uploaded (60Mb) ......
+
==Info about this ==
 +
Freelink [http://downloads.linkstationwiki.net/freelink/development/freelink_mipsel-hdhlan-060723.zip download] and is currently being uploaded (60Mb) ......
  
as required by the firmware updater image.dat password =  
+
*as required by the firmware updater image.dat password =  
* 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
+
** 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
It has a static IP assigned to 192.168.11.150
+
* It has a static IP assigned to 192.168.11.150
root password is "root" if required
+
* root password is "root" if required
telnet is enabled...no ssh
+
* telnet is enabled...no ssh
  
 
avr_evtd ver 1.6 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button)
 
avr_evtd ver 1.6 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button)

Revision as of 00:20, 25 July 2006

Kurobrick.png
WARNING!

There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.



From the Forums:

Freelink for the MIPS.

This has been packaged up as a image.dat suitable for flashing, however, it would be advisable for those who have opened their LS2s to unzip it manually an knoppix it onto the box.


Info about this

Freelink download and is currently being uploaded (60Mb) ......

  • as required by the firmware updater image.dat password =
    • 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
  • It has a static IP assigned to 192.168.11.150
  • root password is "root" if required
  • telnet is enabled...no ssh

avr_evtd ver 1.6 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button)

Installed applications:

  • gcc
  • libc-dev
  • libc6-dev
  • make
  • nano
  • avr_evtd

Good luck all!

-User:SpannerInTheWorks