Difference between revisions of "FreeLink for the MIPSel (LS2) LinkStation"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Info about this freelink)
(Freelink for the MIPS.)
Line 7: Line 7:
 
==Freelink for the MIPS.==
 
==Freelink for the MIPS.==
  
This has been packaged up as a image.dat suitable for flashing, however, it would be advisable for those who have opened their LS2s to unzip it manually an knoppix it onto the box.
+
This has been packaged up as a image.dat suitable for flashing, however, it would be advisable for those who have opened their LS2s to manually unzip it onto the box, with, say Knoppix.
 
+
  
 
==Info about this ==
 
==Info about this ==

Revision as of 19:10, 25 July 2006

Kurobrick.png
WARNING!

There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.



From the Forums:

Freelink for the MIPS.

This has been packaged up as a image.dat suitable for flashing, however, it would be advisable for those who have opened their LS2s to manually unzip it onto the box, with, say Knoppix.

Info about this

Freelink download and is currently being uploaded (60Mb) ......

  • as required by the firmware updater image.dat password =
    • 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
  • It has a static IP assigned to 192.168.11.150
  • root password is "root" if required
  • telnet is enabled...no ssh

avr_evtd ver 1.6 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button)

Installed applications:

  • gcc
  • libc-dev
  • libc6-dev
  • make
  • nano
  • avr_evtd

Good luck all!

-User:SpannerInTheWorks