Difference between revisions of "FreeLink for the MIPSel (LS2) LinkStation"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Installed applications:)
(Info about this)
Line 10: Line 10:
  
 
==Info about this ==
 
==Info about this ==
Freelink [http://downloads.linkstationwiki.net/freelink/development/freelink_mipsel-hdhlan-060723.zip download] and is currently being uploaded (60Mb) ......
+
Freelink [http://downloads.linkstationwiki.net/freelink/development download]
  
 
*as required by the firmware updater image.dat password =  
 
*as required by the firmware updater image.dat password =  
 
** 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
 
** 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
 
* It has a static IP assigned to 192.168.11.150
 
* It has a static IP assigned to 192.168.11.150
* root password is "root" if required
+
* root password = "freelink"
* telnet is enabled...no ssh
+
* ssh enabled
  
avr_evtd ver 1.6 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button)
+
avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button)
  
 
==Installed applications:==
 
==Installed applications:==

Revision as of 15:27, 26 July 2006

Kurobrick.png
WARNING!

There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.



From the Forums:

Freelink for the MIPS.

This has been packaged up as a image.dat suitable for flashing, however, it would be advisable for those who have opened their LS2s to manually unzip it onto the box, with, say Knoppix.

Info about this

Freelink download

  • as required by the firmware updater image.dat password =
    • 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
  • It has a static IP assigned to 192.168.11.150
  • root password = "freelink"
  • ssh enabled

avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button)

Installed applications:

  • gcc
  • libc-dev
  • libc6-dev
  • make
  • nano
  • avr_evtd
  • ssh

Good luck all!

-User:SpannerInTheWorks