Difference between revisions of "FreeLink for the MIPSel (LS2) LinkStation"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Info about this)
(Freelink for the MIPS.)
Line 7: Line 7:
 
==Freelink for the MIPS.==
 
==Freelink for the MIPS.==
  
This has been packaged up as a image.dat suitable for flashing, however, it would be advisable for those who have opened their LS2s to manually unzip it onto the box, with, say Knoppix.
+
This has been packaged up as a image.dat suitable for flashing.
  
 
==Info about this ==
 
==Info about this ==

Revision as of 15:28, 26 July 2006

Kurobrick.png
WARNING!

There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.



From the Forums:

Freelink for the MIPS.

This has been packaged up as a image.dat suitable for flashing.

Info about this

Freelink download

  • as required by the firmware updater image.dat password =
    • 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
  • It has a static IP assigned to 192.168.11.150
  • root password = "freelink"
  • ssh enabled

avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button)

Installed applications:

  • gcc
  • libc-dev
  • libc6-dev
  • make
  • nano
  • avr_evtd
  • ssh

Good luck all!

-User:SpannerInTheWorks