FreeLink for the MIPSel (LS2) LinkStation

(Difference between revisions)

Revision as of 12:38, 28 July 2006

WARNING!

There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.

From the Forums:

This has been packaged up as a image.dat suitable for flashing.

Freelink download

image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l (As required by the firmware updater)
It has a static IP assigned to 192.168.11.150
root password = "freelink"
ssh enabled (no telnet as default)

avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button).

Note: The operation of the reset button for the avr_evtd daemon has changed. This now, with proper setup, allows the user to enter EM-Mode. Please refer to http://www.linkstationwiki.net/index.php?title=AVR_watch-dog_daemon_for_Linkstation for more information.

Good luck all!

@@ Line 12: / Line 12: @@
 Freelink [http://downloads.linkstationwiki.net/freelink/development download]
-*as required by the firmware updater image.dat password =
+* image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l     (As required by the firmware updater)
-** 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
 * It has a static IP assigned to 192.168.11.150
 * root password = "freelink"
-* ssh enabled
+* ssh enabled (no telnet as default)
 avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button).