FreeLink for the MIPSel (LS2) LinkStation

From NAS-Central Buffalo - The Linkstation Wiki

Revision as of 12:42, 28 July 2006

WARNING! There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.

From the Forums:

• Freelink for the mips - Testers required

Freelink for the MIPS.

This has been packaged up as a image.dat suitable for flashing.

See forum topic here

Info about this

Freelink download

• image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l (As required by the firmware updater)
• It has a static IP assigned to 192.168.11.150
• root password = "freelink"
• ssh enabled (no telnet as default)

avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button).

Note: The operation of the reset button for the avr_evtd daemon has changed. This now, with proper setup, allows the user to enter EM-Mode. Please refer to http://www.linkstationwiki.net/index.php?title=AVR_watch-dog_daemon_for_Linkstation for more information.

Installed applications:

• gcc
• libc-dev
• libc6-dev
• make
• nano
• avr_evtd
• ssh

Good luck all!

-User:SpannerInTheWorks