Difference between revisions of "FreeLink for the MIPSel (LS2) LinkStation"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Freelink for the MIPS.)
(Freelink for the MIPS.)
Line 10: Line 10:
See forum topic [http://forum.linkstationwiki.net/index.php?action=vthread&forum=7&topic=1192 here]
See forum topic [http://forum.linkstationwiki.net/index.php?action=vthread&forum=7&topic=1192 here]
Refer to [http://linkstationwiki.net/index.php?title=The_LinkStation_firmware_flasher The LinkStation firmware flasher] article for Firmware Updater HowTos.
==Info about this ==
==Info about this ==

Revision as of 18:21, 28 July 2006


There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.

From the Forums:

Freelink for the MIPS.

This has been packaged up as a image.dat suitable for flashing.

See forum topic here

Refer to The LinkStation firmware flasher article for Firmware Updater HowTos.

Info about this

Freelink download

  • image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l (As required by the firmware updater)
  • It has a static IP assigned to
  • root password = "freelink"
  • ssh enabled (no telnet as default)

avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button).

Note: The operation of the reset button for the avr_evtd daemon has changed. This now, with proper setup, allows the user to enter EM-Mode. Please refer to http://www.linkstationwiki.net/index.php?title=AVR_watch-dog_daemon_for_Linkstation for more information.

Installed applications:

  • gcc
  • libc-dev
  • libc6-dev
  • make
  • nano
  • avr_evtd
  • ssh

Good luck all!