Difference between revisions of "FreeLink for the MIPSel (LS2) LinkStation"

From NAS-Central Buffalo - The Linkstation Wiki
Jump to: navigation, search
(Freelink for the MIPS.)
(Info about this)
Line 25: Line 25:
  
 
'''Note: The operation of the reset button for the avr_evtd daemon has changed.  This now, with proper setup,'''
 
'''Note: The operation of the reset button for the avr_evtd daemon has changed.  This now, with proper setup,'''
'''allows the user to enter EM-Mode.  Please refer to'''
+
'''allows the user to enter EM-Mode.  Please refer to
http://www.linkstationwiki.net/index.php?title=AVR_watch-dog_daemon_for_Linkstation for more information.
+
[http://www.linkstationwiki.net/index.php?title=AVR_watch-dog_daemon_for_Linkstation AVR watch-dog daemon for Linkstation] for more information.
  
 
==Installed applications:==
 
==Installed applications:==

Revision as of 18:23, 28 July 2006

Kurobrick.png
WARNING!

There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.



From the Forums:

Freelink for the MIPS.

This has been packaged up as a image.dat suitable for flashing.

See forum topic here


Refer to The LinkStation firmware flasher article for Firmware Updater HowTos.

Info about this

Freelink download

  • image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l (As required by the firmware updater)
  • It has a static IP assigned to 192.168.11.150
  • root password = "freelink"
  • ssh enabled (no telnet as default)

avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button).

Note: The operation of the reset button for the avr_evtd daemon has changed. This now, with proper setup, allows the user to enter EM-Mode. Please refer to AVR watch-dog daemon for Linkstation for more information.

Installed applications:

  • gcc
  • libc-dev
  • libc6-dev
  • make
  • nano
  • avr_evtd
  • ssh

Good luck all!

-User:SpannerInTheWorks