FreeLink for the MIPSel (LS2) LinkStation

From NAS-Central Buffalo - The Linkstation Wiki

(Difference between revisions)
Jump to: navigation, search
(→Installed applications:)
m
Line 2: Line 2:
{{Brick|}}
{{Brick|}}
-
From the Forums:
 
-
*[http://forum.linkstationwiki.net/index.php?action=vthread&forum=7&topic=1192 Freelink for the mips - Testers required]
 
==Freelink for the MIPS.==
==Freelink for the MIPS.==
Line 9: Line 7:
This has been packaged up as a image.dat suitable for flashing.
This has been packaged up as a image.dat suitable for flashing.
-
See forum topic [http://forum.linkstationwiki.net/index.php?action=vthread&forum=7&topic=1192 here]
+
From the Forums:
-
 
+
*[http://forum.linkstationwiki.net/index.php?action=vthread&forum=7&topic=1192 Freelink for the mips - Testers required]
Refer to [http://linkstationwiki.net/index.php?title=The_LinkStation_firmware_flasher The LinkStation firmware flasher] article for Firmware Updater HowTos.
Refer to [http://linkstationwiki.net/index.php?title=The_LinkStation_firmware_flasher The LinkStation firmware flasher] article for Firmware Updater HowTos.

Revision as of 22:08, 28 July 2006

Image:Kurobrick.png
WARNING!

There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.



Freelink for the MIPS.

This has been packaged up as a image.dat suitable for flashing.

From the Forums:

Refer to The LinkStation firmware flasher article for Firmware Updater HowTos.

Info about this

Freelink download

  • image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l (As required by the firmware updater)
  • It has a static IP assigned to 192.168.11.150
  • root password = "freelink"
  • ssh enabled (no telnet as default)

avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button).

Note: The operation of the reset button for the avr_evtd daemon has changed. This now, with proper setup, allows the user to enter EM-Mode. Please refer to AVR watch-dog daemon for Linkstation for more information.

Installed applications:

  • gcc
  • libc-dev
  • libc6-dev
  • make
  • nano
  • avr_evtd
  • ssh

Good luck all!

-User:SpannerInTheWorks

Retrieved from "http://buffalo.nas-central.org/wiki/FreeLink_for_the_MIPSel_(LS2)_LinkStation"
Personal tools