FreeLink for the MIPSel (LS2) LinkStation
From NAS-Central Buffalo - The Linkstation Wiki
(Difference between revisions)
m (→Freelink for the MIPS.) |
m |
||
| Line 3: | Line 3: | ||
| - | ==freelink_mipsel-hdhlan-060810== | + | ==<font color=brown>freelink_mipsel-hdhlan-060810</font>== |
| - | + | ==<font color=brown>freelink_mipsel-hdhlan-060801</font>== | |
| - | ==freelink_mipsel-hdhlan-060801== | + | *This has been packaged up as a image.dat suitable for flashing. |
| - | This has been packaged up as a image.dat suitable for flashing. | + | |
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| - | + | ||
| + | * From the Forums: [http://forum.linkstationwiki.net/index.php?action=vthread&forum=7&topic=1192 Freelink for the mips - Testers required] | ||
| + | * Refer to [http://linkstationwiki.net/index.php?title=The_LinkStation_firmware_flasher The LinkStation firmware flasher] article for Firmware Updater HowTos. | ||
| + | * Info about this: Freelink [http://downloads.linkstationwiki.net/freelink/development download] | ||
* image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l (As required by the firmware updater) | * image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l (As required by the firmware updater) | ||
* It has a static IP assigned to 192.168.11.150 | * It has a static IP assigned to 192.168.11.150 | ||
* root password = "freelink" | * root password = "freelink" | ||
* ssh enabled (no telnet as default) | * ssh enabled (no telnet as default) | ||
| + | * avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button). | ||
| - | + | :'''Note: The operation of the reset button for the avr_evtd daemon has changed. This now, with proper setup,''' | |
| - | + | :'''allows the user to enter EM-Mode. Please refer to | |
| - | '''Note: The operation of the reset button for the avr_evtd daemon has changed. This now, with proper setup,''' | + | |
| - | '''allows the user to enter EM-Mode. Please refer to | + | |
[http://www.linkstationwiki.net/index.php?title=AVR_watch-dog_daemon_for_Linkstation AVR watch-dog daemon for Linkstation] for more information. | [http://www.linkstationwiki.net/index.php?title=AVR_watch-dog_daemon_for_Linkstation AVR watch-dog daemon for Linkstation] for more information. | ||
| - | ==Installed applications:== | + | ===Installed applications:=== |
gcc | gcc | ||
libc-dev | libc-dev | ||
Revision as of 02:30, 14 August 2006
|
freelink_mipsel-hdhlan-060810
freelink_mipsel-hdhlan-060801
- This has been packaged up as a image.dat suitable for flashing.
- From the Forums: Freelink for the mips - Testers required
- Refer to The LinkStation firmware flasher article for Firmware Updater HowTos.
- Info about this: Freelink download
- image.dat password = 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l (As required by the firmware updater)
- It has a static IP assigned to 192.168.11.150
- root password = "freelink"
- ssh enabled (no telnet as default)
- avr_evtd ver 1.61 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button).
- Note: The operation of the reset button for the avr_evtd daemon has changed. This now, with proper setup,
- allows the user to enter EM-Mode. Please refer to
AVR watch-dog daemon for Linkstation for more information.
Installed applications:
gcc libc-dev libc6-dev make nano avr_evtd ssh
Good luck all! -User:SpannerInTheWorks
