FreeLink for the MIPSel (LS2) LinkStation

From NAS-Central Buffalo - The Linkstation Wiki
Revision as of 00:20, 25 July 2006 by (Talk) (Info about this freelink)

Jump to: navigation, search

There is a possibility that you could brick your NAS with these instructions. Please make sure that you read the entire page carefully.

From the Forums:

Freelink for the MIPS.

This has been packaged up as a image.dat suitable for flashing, however, it would be advisable for those who have opened their LS2s to unzip it manually an knoppix it onto the box.

Info about this

Freelink download and is currently being uploaded (60Mb) ......

  • as required by the firmware updater image.dat password =
    • 1NIf_2yUOlRDpYZUVNqboRpMBoZwT4PzoUvOPUp6l
  • It has a static IP assigned to
  • root password is "root" if required
  • telnet is ssh

avr_evtd ver 1.6 - Fully functioning including s/w shutdown/restart, emergency telnet on port 1234 (just two clicks of the reset button)

Installed applications:

  • gcc
  • libc-dev
  • libc6-dev
  • make
  • nano
  • avr_evtd

Good luck all!